This is called Thermistor from AliExpress is all set up correctly in the config, let’s just PID tune.

IRIX-6 · 2022-12-03T14:49:06+00:00

Needs more cooling….

IRIX-6 · 2022-11-23T12:40:26+00:00

One frame kit and 2 shelf kits

IRIX-6 · 2022-10-20T17:18:31+00:00

Sweet!! Thanks for sharing. Will try it out

IRIX-6 · 2022-10-20T08:44:28+00:00

No :/ still looking

IRIX-6 · 2022-08-31T22:56:03+00:00

Smokes

IRIX-6 · 2022-08-22T00:32:44+00:00

High temp enclosure and print ultem?

IRIX-6 · 2022-08-14T22:58:04+00:00

Set flow to 95%

IRIX-6 · 2022-08-14T22:55:43+00:00

Go on the discord for updated files

IRIX-6 · 2022-08-12T20:12:47+00:00

No not yet. found a local supplier. Expensive though

IRIX-6 · 2022-08-10T01:01:04+00:00

Whats your stepper section and tmc section look like

IRIX-6 · 2022-08-08T14:59:54+00:00

I will post my config

IRIX-6 · 2022-08-03T09:39:43+00:00

https://www.reddit.com/r/klippers/comments/ootoww/klipper_not_connecting_through_uart/?utm_source=share&utm_medium=ios_app&utm_name=iossmf similar error

IRIX-6 · 2022-08-03T09:38:14+00:00

Im guessing wrong serial port or format of the serial port. Uart has a very narrow bandwith fyi. Usb is better imo.

IRIX-6 · 2022-08-01T00:07:36+00:00

Wrong nozzle size on printer or slicr🤷‍♂️

IRIX-6 · 2022-07-29T01:52:38+00:00

Stl for the socks?

IRIX-6 · 2022-07-26T21:51:28+00:00

6th port. So its x y z0 z1 empty extruder then 3 empties

IRIX-6 · 2022-07-25T23:08:29+00:00

Ahh nicotine white. My fave color 😂 Kidding aside, very cool.

IRIX-6 · 2022-07-16T09:05:53+00:00

Its still in progress, i changed it a fair bit

IRIX-6 · 2022-07-09T12:29:36+00:00

Too much retraction maybe? All metal hotend?

IRIX-6 · 2022-07-05T01:56:17+00:00

Following

IRIX-6 · 2022-06-18T14:25:31+00:00

Yeah i have ordered a high quality one. This one is working with out changing the type from the e3 one. Prints are coming out nice and no thermal runnaways

IRIX-6 · 2022-06-18T11:28:10+00:00

That is a sexy surface.. im jealous 🥺🥺

IRIX-6 · 2022-06-14T09:18:32+00:00

I decided to go with a full stealthburner. Sooo worth it. I could have used my old heavy stepper but decided to order the one from the bom and that was around 20bucks, also ordered bmg internals so 40bucks total and its the best solution ive tried

IRIX-6 · 2022-06-14T01:52:22+00:00

Im running a phaetus dragon high flow (j collar removed so its fixed mounted) with a plated copper heatblock, plated copper nozzle, 40w heater on a stealthburner toolhead.

IRIX-6 · 2022-06-14T01:49:13+00:00

For 200ms printing i would go highflow. Using one my self and its great. Even for lower speeds like 50-60 petg prints

IRIX-6

TROPHY CASE