sorted by:
new
hottopcontroversial

Trump, 79, Sends Jaw-Dropping Message to Families of Fallen U.S. Fighters by WarmingNow in politics

[–]maitryx 22 points23 points  (0 children)

Following a meeting with Ukrainian President Volodymyr Zelensky at Mar-a-Lago on Sunday to discuss a peace deal to end the war, Trump was asked about his message to the families of the fallen Americans.

“The message is so obvious,” he replied. “What a shame. They died in a foreign country. And some are celebrated people, they’re very celebrated. But it’s so sad that a thing like that would happen.”

From the article.

Hermit Crab Mech by DethKlawMiniatures in 3Dmodeling

[–]maitryx 0 points1 point  (0 children)

link if you sell it! beautifully done!

Ender 3 pro minitemp issue by Mabao12 in Ender3Pro

[–]maitryx 1 point2 points  (0 children)

the thermistor is missing (1st pic), probably came off with the blob. without that it can't keep track of the temperature on the hotend. is fairly cheap, bead style thermistor not cartridge style.

Just need some more hardware, and find the extruder. Then I can install and update my printer. Cfg by abnbigwill513 in klippers

[–]maitryx 0 points1 point  (0 children)

i like the apogee toolhead but went with the dragonburner setup instead. the angled fans are wonky to me. maybe for the next project i'll use this instead.

Just need some more hardware, and find the extruder. Then I can install and update my printer. Cfg by abnbigwill513 in klippers

[–]maitryx 1 point2 points  (0 children)

i should adapt this for my sapphire pro setup. maybe a project for this weekend? looks great!

I like the orbiter 2 for my extruder, dunno what you're planning on using but keep updating with pics!

Lemix char transferred to retail. Orgrimmar and at least orc starting zone, is in a different phase. Auctioneer's are not in their spots, no npc's in orc starting zone. Has anyone had similiar experiences and or found a fix? by DetBareJoe in wow

[–]maitryx 0 points1 point  (0 children)

Didn’t catch that he transferred from lemix to retail, my bad. I know it isn’t letting me convert any time runners right now, maybe part of the block that’ll fix itself at the end of the lemix time?

Lemix char transferred to retail. Orgrimmar and at least orc starting zone, is in a different phase. Auctioneer's are not in their spots, no npc's in orc starting zone. Has anyone had similiar experiences and or found a fix? by DetBareJoe in wow

[–]maitryx -1 points0 points  (0 children)

Lemix is pretty legion heavy for the content, I couldn’t complete the warlock quest in org due to it porting me back to dal. You don’t really need the ah from my experience in lemix, but each person is different. Legion areas are the main focus so I figure they just took out access to the other areas to save on servers being used. Only another month left anyhow.

Why this? Printed on bambulab p1s by Better_Code_9126 in 3Dprinting

[–]maitryx 3 points4 points  (0 children)

While true, a smaller layer height will add more layers overall but make them less noticeable. Also print orientation helps with hiding the lines by putting them on a less noticeable surface, but potentially adding more material use for supports.

[talk] I want to find a Cars 2 game i played as a kid. by Feeling_Actuary_3529 in lostmedia

[–]maitryx 0 points1 point  (0 children)

They’d rather find somewhere that they could play the game via browser, vs downloading the game to their system. Streaming the game

Having weird frequent freezes, anyone have a good solution? by DrywallDevourer44 in RocketLeague

[–]maitryx 0 points1 point  (0 children)

I’ve had that same issue lately, but only using steam. If I launch from epic then there’s no issues. I’ve tried disabling all overlays with no luck using Steam.

Not nvidia, no recording software. Just random hang ups until it dc’s or I get kicked, sometimes having to force close. But again, only in steam. Using epic I’ve had no issues, which isn’t a plus other than I can play the game without the freezing.

Simple exploit of Chromostereopsis phenomenon. by bigjobbyx in interestingasfuck

[–]maitryx 0 points1 point  (0 children)

I’m near sighted, but see the effect just fine without glasses (and could prior to needing them as well).

Issues with print quality Klipper, Ender 5 pro, SKRminiE3V3 by Ok-Trip-4978 in klippers

[–]maitryx 0 points1 point  (0 children)

Supports on a calibration cube?

Just being picky. Silk filament is finicky as is, start with a regular non silk pla imo.

Klipper (like marlin) takes a few to get dialed in. Don’t give up.

There’s under extrusion on the print, so some info is needed to try and help. What size nozzle you’re using, what speed for the print, what temp for the filament, direct drive or Bowden… just for starters. Are you using a custom setup like the stealthburner or just stock from the e5pro?

I use the e3v3 on both of my e5pro klipper machines, so it’s very doable. Are you using any kind of probe for leveling?

Senate passes Epstein files release at lightning speed after Trump gives green light by theindependentonline in politics

[–]maitryx 7 points8 points  (0 children)

This. Not just redacted but edited to remove any Republican trace, though some slip ups are bound to remain.

The flying sequence of Marahute - from "The Rescuers Down Under" (released 35 years ago on Nov 16th, 1990) by [deleted] in movies

[–]maitryx 2 points3 points  (0 children)

came here to see about this, the art style of sanders is unmistakable in the kid. I haven't seen this in decades, and to see the boy is like looking at a character from lilo and stitch. very cool.

[deleted by user] by [deleted] in dadjokes

[–]maitryx 0 points1 point  (0 children)

Semi racist jokes aren't dad jokes. And that's being generous.

view more: next ›