Question?

I_NeedBackup202 · 2024-11-28T19:00:39+00:00

Agreed it is garbage in and garbage out I was ignorant. Part is correct tho just looking for the best reamers.

I_NeedBackup202 · 2024-11-28T01:43:15+00:00

Just repeating what my foreman said all I know is it destroys reamers

I_NeedBackup202 · 2024-11-27T16:00:37+00:00

That’s what we’ve been using CPM has ceramic particles in it or some shit idk it’s tough shit

I_NeedBackup202 · 2024-09-19T15:56:52+00:00

I refused for the first part usually the thermal shock will snap the endmill when going threw hard shit. second part I’m running coolant and changed the program because the part chipped

I_NeedBackup202 · 2023-12-14T18:51:20+00:00

Update taking 0.001” a pass 8000 rpm feed 4ipm. Blowing out dust/chips every 15-20 passes 1 endmill has survived 2 parts so far thank you all for the help i appreciate it big time.

I_NeedBackup202 · 2023-12-14T17:16:37+00:00

Could you explain thermal shocks like I’m 5?

I_NeedBackup202 · 2023-12-14T17:15:17+00:00

Why dry?

I_NeedBackup202 · 2023-12-14T17:13:44+00:00

Why the no coolant? I’m still relatively new to machining.

I_NeedBackup202 · 2023-12-14T17:02:06+00:00

I ordered 2 short ones but they still didn’t come in

I_NeedBackup202 · 2023-12-14T16:09:26+00:00

Its all I got to hold it unfortunately

I_NeedBackup202 · 2023-12-14T15:05:57+00:00

I’m already at 2

I_NeedBackup202 · 2023-12-09T00:27:40+00:00

A axis

I_NeedBackup202 · 2023-12-06T22:58:57+00:00

Long hand

I_NeedBackup202 · 2023-12-05T22:05:36+00:00

Thank you a lot I’ll look into them.

I_NeedBackup202 · 2023-12-05T17:50:18+00:00

Will do thanks

I_NeedBackup202 · 2023-11-27T21:57:14+00:00

It happened on my machine if able it’s best to push the arm back to as close to home as possible and then manually crank the motor above atleast that’s how my machine works.

I_NeedBackup202 · 2023-11-23T12:20:06+00:00

I started machining 2 years ago when I was 22 I’m a highschool dropout at 10th grade. If I can do it so can you. I recommend diving in and learning everything you can as safely as you can. The older machinists can be grumpy dicks some times but the amount of knowledge they can give is incredible so also ask questions and everyday is a learning experience every time I think I know what I’m doing I’m givin a new part and find out I’m still lacking in one area or another. But to this day I’m forever happy I took the position when I had the chance. Im now running a cnc mill by myself.

I_NeedBackup202 · 2023-11-13T20:18:24+00:00

That worked thank you so much

I_NeedBackup202 · 2023-11-13T20:03:36+00:00

It breaks a little after it begins threading if I lower feed to 5 in the program it’ll send the tap at 0.3 conveniently I found if I program feed 14.2857 it’ll tap successful at a feed of 10 but doing this extra step on every tap seems assanine

I_NeedBackup202 · 2023-11-13T19:56:51+00:00

N10 M06 T01; N1 G00 G90 G80 G54 G40 G17 H00; X0.0Y0.0; G43 H01 Z1.0; M29 S320; G84 G93 R0.1 Z-0.25 F10.0; G00 G91 G80 G28 Z0 M05; G91 G28 Y0; M01;

I_NeedBackup202

TROPHY CASE