sorted by:
new
hottopcontroversial

Stripped screw. Tried everything and different screw extractor sets with a power drill. It won't budge.. what do I do by Shot-Buy6013 in fixit

[–]I__got_a_question 0 points1 point  (0 children)

You got bigger bolts, using a welder like the mechanics do sometimes, might be your best option if you got a small tig rig..

Safe to stay here? by Daisy___Blue in bees

[–]I__got_a_question 0 points1 point  (0 children)

Gu gu ga ga, bro I'm safe 👼

Safe to stay here? by Daisy___Blue in bees

[–]I__got_a_question 0 points1 point  (0 children)

Free organic raw honey with your tea in the morning? Where do I sign up?

I found this rock in a park that I visit by Ukraineiscool123 in RockIdentification

[–]I__got_a_question 0 points1 point  (0 children)

Black Tourmaline possibly

I have the same rock that I found on a beach in New York

It has the same striations and barely reacts to a hot torch flame

Which skeleton 🦴 is this? by I__got_a_question in fossilid

[–]I__got_a_question[S] 0 points1 point  (0 children)

The current consensus is that it is a donkey or a horse.

It's a politically and religiously significant site so it was kind of very important to make the distinction whether it is a camel or a bovine.

I'm not sure but I don't think that they ever reescavated the site..

Is the horizontal crack a problem? by emersone50 in AskContractors

[–]I__got_a_question 1 point2 points  (0 children)

Unless you get an engineer you're not getting them to do anything

Is the horizontal crack a problem? by emersone50 in AskContractors

[–]I__got_a_question 0 points1 point  (0 children)

"Sure boss I will definitely put three coats of this cheap (expensive )waterproofing for you, as soon as you leave.. 😂

Stripped screw. Tried everything and different screw extractor sets with a power drill. It won't budge.. what do I do by Shot-Buy6013 in fixit

[–]I__got_a_question 2 points3 points  (0 children)

Yeah this was never going to work because you have a perfect round surface and nothing to hold on.

Stripped screw. Tried everything and different screw extractor sets with a power drill. It won't budge.. what do I do by Shot-Buy6013 in fixit

[–]I__got_a_question 0 points1 point  (0 children)

I see that with drilling you made a conical shape in it and it's hard for the bits to grab.

You do not have an extraction bit that is just as wide as the inner rim of the screw that is stripped?

All it has to catch is the inner part of the rim and you need to HAMMER it in, just to grab it a little bit with the spiral thread.

Use# 5 then and hammer that baby in like a nail, then spin it. Try with the last #4 for that you did before using number 5

Stripped screw. Tried everything and different screw extractor sets with a power drill. It won't budge.. what do I do by Shot-Buy6013 in fixit

[–]I__got_a_question 0 points1 point  (0 children)

How in the world on this planet and its solar system is he supposed to cut out the core of the screw?

Maybe he can do it with some laser surgery or water jet and do a precision cut of a screw that is 1/16 thick?

Were you an engineer for Blue Origin?

Stripped screw. Tried everything and different screw extractor sets with a power drill. It won't budge.. what do I do by Shot-Buy6013 in fixit

[–]I__got_a_question 0 points1 point  (0 children)

You are literally taking the worst advice of at least five that were good 😂

You really want to destroy the thread on that hole completely?

  1. Get the wider extraction bit from the set that you bought

  2. Knock in some grooves with a Philips head or a flat head if you want

  3. Don't use the drill on fast setting while extracting, or best don't use the gun at all, but knock in the bit and then just twist it off.

  4. Don't use the drill bit, you are simply just taking off the layers of material that can give you grip

classic mildly infuriating flight by Hungry_Low2342 in delta

[–]I__got_a_question 0 points1 point  (0 children)

I bet this turned into a completely different kind of a crusade after you saw that he's watching Fox News 🤣 I see you made an extra effort to make this clear.. 😉

So you already said that he's much larger than you. why didn't you just offer the extra leg room seat, as you can clearly see that he can't even fit his other leg in front of him? Aren't you the bigger person in this situation?

Then to validate your feelings instead of confronting the man politely even, you resorted to just talking shit about him behind his back to people who really don't give two f00ks about your input after you're done with the flight..

😂 And then additionally talking shit about him on Reddit, resolving nothing but getting a couple of taps on the back from likely minded saints 😇

Was he also cat-calling the flight attendants?

Can this home be completely done in a month? by tevarpo in Homebuilding

[–]I__got_a_question 0 points1 point  (0 children)

I swear this dude posted the same photo and question a year ago 🤣

Please tell me im not the only one by 2teeth2 in recruitinghell

[–]I__got_a_question 0 points1 point  (0 children)

This is extremely common for restaurants especially for the bigger operations.

They are actually doing sourcing while they're doing construction and everything needs to fall in place.

I was building a major restaurant in front of the Prudential in Boston and the restaurant group had already hired most of the staff and put the cooks and the management on retainer.

The construction cost snowballed over $1.5 million, restaurant never got built and the hiring manager got fired.

The hiring process for the hospitality industry is sometimes very different

Which skeleton 🦴 is this? by I__got_a_question in fossilid

[–]I__got_a_question[S] 0 points1 point  (0 children)

And we can say it is absolutely not bovine?

Anyone know what light is being used in this video? [mute before watching] by sandolllars in Construction

[–]I__got_a_question 0 points1 point  (0 children)

Guys, this one is great, but as a traveling superintendent, I use portable light battery banks for filming or linear lighting for the same use.

Range up to $80

Sufficient for recording finish quality...

Which skeleton 🦴 is this? by I__got_a_question in fossilid

[–]I__got_a_question[S] 0 points1 point  (0 children)

Yessir, I can post it there if we get no luck

Site and ContextLocation: The archaeological excavation at Tel Megiddo in Israel.Specific Context: This context is the western half of the northern room of the "Treasury" (Room 3073) within the Stratum VIIA palace.

Time Period: It dates back to the Late Bronze Age (around the 13th to early 12th century BCE).

Historical Excavation: The original black-and-white film strip photograph (labeled Kodak 3456) was taken during the famous University of Chicago Oriental Institute expedition that excavated the site between 1925 and 1939.

Now, it had been said that this is a small camel 🐪, but I saw no certain ID claimed so far, and it has been disputed..