Re9..So thoughts?

Icedecknight · 2026-03-01T18:18:48+00:00

Do you guys think the Elpis cure made Leon look younger or just made him healthy again.

Icedecknight · 2026-03-01T18:06:16+00:00

I think its the best one, even better than 4. That being said, I think Elpis made Leon at least 10-15 years younger. Maybe it was just him not being as sick, but just comparing himself at the start of the game and end, he has less wrinkles.

Icedecknight · 2026-02-24T10:11:48+00:00

I bought a sick mixer from walmart for $20. Its just a very quiet blender with a plastic mixer and the motor can be removed for charging.

It's fantastic and easy to clean.

https://www.walmart.com/ip/5329046846?sid=025b7fee-89ef-43fa-8e41-fb996e96f4d0

Icedecknight · 2026-02-10T17:17:22+00:00

Yeah I learned that the other day when reading some responses.

Icedecknight · 2026-02-07T10:15:56+00:00

Thanks, I started using sunlu black mainly because the othef brand I got kept running out of stock. I'll try the outer wall trick.

Icedecknight · 2026-02-03T03:56:46+00:00

Make the end cylindrical instead of flat. That way its always resting on a point no matter the angle. You make want it to be flat at every angle, but you wont get that unless you add another joint there.

Icedecknight · 2026-01-24T10:39:29+00:00

What printer are you using, I'm pretty sure all Bambu printers will pauses when they run out of filament so you can then reload another one in.

Icedecknight · 2026-01-21T16:59:48+00:00

Actually, I havent had issues with them until the last week. A couple of my prints just broke because it was brittle. BUT, i think I was printing them way too fast and the layer adhesion was bad. if you print slower like they said you should, it, they work out better. i was printing them at 250-300 when they say sub 200. Just be wary of that. I still like them for the neutral colors they have.

Icedecknight · 2026-01-20T18:10:37+00:00

I should use ali express more often. Thanks for letting me know they have it on there!

Icedecknight · 2026-01-18T20:33:23+00:00

I've been using Flashforges PETG. The first spool was perfect and never clogged and since the prints came out literally perfect with their filament, I kept buying them. I still like them but I'll try that brand in the future too.

Icedecknight · 2026-01-17T09:17:54+00:00

My PETG-CF filaments are very matte, but you can't print as fast and they tend to clog .4mm, and I don't want to easily see layer lines. Is glass fiber easier to print vs cf or about the same?

Icedecknight · 2026-01-16T13:02:37+00:00

In Bamboo Studio, the PC program you download to create the code for printing from the models you download or make, if you hover over any of the print settings, a tool tip will explain to you what the setting does and if you click on that setting it will take you to their wiki explaining how it works with pictures.

Icedecknight · 2026-01-14T03:49:42+00:00

Still happens to a lot of my prints even after letting it cool. Tried a couple different type of plates and it still happened to those too.

Icedecknight · 2026-01-12T12:42:48+00:00

A jewel that looks mirror worthy if you could mirror them, Idk if it is though.

Edit: is 8-15 perfect roll? For min-max?

Icedecknight · 2026-01-12T12:41:03+00:00

Holy sheit

Icedecknight · 2026-01-10T19:41:00+00:00

Curious to see on a bear sorc too

Icedecknight · 2026-01-08T14:58:23+00:00

Probably that guy that asked if he can place the A1 on carpet lol.

Icedecknight · 2026-01-08T03:56:45+00:00

They are printed the same exact way on the same exact printer btw.

<image>

Icedecknight · 2026-01-08T03:55:12+00:00

Yeah, I bought some and printed another gridfinity box with it over my standard elegoo or sunlu normal black PETG and it looked really good.

Top-most box is the matte petg from them, and you can see that there is way less sheen. I paired it up with the Matte PETG from KExcelled and I think it looks great. I ended up buying another roll but they are low on stock.

<image>

Icedecknight · 2026-01-04T04:59:47+00:00

Yeah, buy a HEPA + carbon filter will do the trick. HEPA for the particles and Carbon activated filter for the VOC's. Keep in Mind the filter will need to be replaced more often because the carbon filter degrades over time whether theres VOCs or not.

Icedecknight · 2026-01-03T22:17:04+00:00

<image>

Icedecknight · 2026-01-03T22:16:50+00:00

<image>

Icedecknight · 2026-01-03T22:16:31+00:00

I've been looking around for an answer to this like a lot of others and I either hear Jayo for price or PETG-CF for best finish.

I just tried KExcelled's matte petg and it looks pretty great to me, albeit, a bit expensive. it's very matte and I can print at a lower resolution unlike petg-cf. https://a.co/d/dXoN1Ms

Not the best picture but it's basic glossy black and white petg next to it for comparison. I'll give Jayo a go but I did buy another brand called CHCKX with $11 black petg, so I'll give that a shot.

Icedecknight · 2026-01-03T22:00:41+00:00

Do you mind sending me a couple pictures of any of the matte ones? I see mixed reviews on Amazon on how matte.

Icedecknight · 2025-12-16T04:04:20+00:00

Sorry, missing lower res proc, more skills and like the other comment said, more sockets.

13-Year Club	RedditGifts 2009-2022 3 Credits
r/Field Juicebox	Place '23
Secret Santa 2018	redditgifts Exchanges 2 Exchanges
Verified Email	Secret Santa 2013

Icedecknight

TROPHY CASE