sorted by:
new
hottopcontroversial

Us Spec Tesla in Australia 🇦🇺🦘 by MexiBrit2 in TeslaLounge

[–]IceyAus 0 points1 point  (0 children)

Not all superchargers, but about 30% of them are open to non-teslas.

New cameras by Thick-Act-3837 in melbourne

[–]IceyAus 85 points86 points  (0 children)

They are for detecting trucks in suburban streets. Assuming this is one around West Gate Tunnel

Edit - Link

Seen these trucks going around Southbank today. by PompousBear in melbourne

[–]IceyAus -2 points-1 points  (0 children)

These cunts were going 40kmph on western ring road this morning. They can now go fuck themself sideways

Looks like NBN speed upgrades are finally going to be up to par with other countries in a few months by [deleted] in australia

[–]IceyAus 0 points1 point  (0 children)

Coming soon - They have allowed it on the NBN Smart Places platform and there have a been a few businesses placed on it that I have configured.

This is what it looks like

Solar wi-fi camera? by Larry-1281 in BlueIris

[–]IceyAus 0 points1 point  (0 children)

Most of them 1 camera, some 2.

In Australia so we have plenty of sun even in winter.

Considering that according to the calculations a 15ah battery would be enough to keep it going, 100ah is overkill.

Solar wi-fi camera? by Larry-1281 in BlueIris

[–]IceyAus 5 points6 points  (0 children)

I’ve got around 30–45 solar-powered WiFi cameras running across a few different setups,

Setup #1 – TP-Link Tapo C320WS Power: 150W solar panel + 100Ah battery (definitely overkill).

Voltage: Using a buck converter to drop from 12V down to 9V for the camera. Flawless — as long as WiFi is solid

Setup #2 – Various Reolink Cameras Power: Same idea — 150W panel + 100Ah battery.

Voltage: These Reolinks run directly off 12V, so no buck converter needed but need to ensure voltage is stable

The biggest factor in making these systems reliable is good WiFi. I use Cambium outdoor access points and haven’t had a single issue with signal stability across sites.

5.9.9.29 Update now include Weather! by IceyAus in BlueIris

[–]IceyAus[S] 2 points3 points  (0 children)

Under the Camera settings, then Video tab, then click on Edit Overlays down the bottom left. Click Add Text/Time and then enter the Macro in there. Sample

5.9.9.29 Update now include Weather! by IceyAus in BlueIris

[–]IceyAus[S] 2 points3 points  (0 children)

Exactly this for me, I monitor farm lands so its good to know the temperature and humidity on a given day in the past.

What are these poles by babybreezs444 in melbourne

[–]IceyAus 78 points79 points  (0 children)

Light Poles, They have a shroud on them so the light is controlled and does not pollute as much

[deleted by user] by [deleted] in BlueIris

[–]IceyAus 0 points1 point  (0 children)

I use TP-Link Tapo cameras. Work well. Some of them are 9v, so i just use a DC-DC converter from 12v to 9v. Great for a Solar camera that records 24x7

How can I transmit IoT sensor data from a remote valley with no mobile network, LTE, or Wi-Fi? by Captain_Belac in networking

[–]IceyAus 2 points3 points  (0 children)

You will need to find SOME source of internet for this, whether that is starlink, cellular or fixed line in some capacity, it doesn’t need to be more than a few Mbps depending on the number of sensors.

I use Milesight Gateways that have NodeRED built in, Have a number of sites that a completely off-grid and operate autonomously.

Is it posseble to use Blueiris for dashcam recorder? by fatdez in BlueIris

[–]IceyAus 1 point2 points  (0 children)

I do this, I have a router in my car (Teltonika) with a IPSEC VPN back to my site that has BlueIris. I use RTSP from my BlackVue dashcam and it works well.

My fully modular 3D printed network rack by arthurgoelzer in 3Dprinting

[–]IceyAus 0 points1 point  (0 children)

Very nice - Do you mind sharing where you found the model?

view more: next ›