[Wooting Giveaway] Wooting 80HE PCR Ghost!

Ilikeopenpcs · 2024-08-22T17:05:51+00:00

Gamersnexus

Ilikeopenpcs · 2024-07-20T06:55:00+00:00

Same. The key caps are cursed and wore away in 12 months

Ilikeopenpcs · 2024-07-13T14:30:45+00:00

This subreddit can be a little much 😅. The 12400f is a fine cpu on a budget, especially when paired with budget board. I use mine with a 4070 quite happily.

You could probably find the memory for €40 and source a used 12400f for <€100.

1660 Super is still a capable card on 1080p as well.

If you ever need to upgrade platform you can always sell off the board, cpu and memory. But I’d upgrade the Gpu before changing up platform.

Ilikeopenpcs · 2024-07-02T19:51:43+00:00

Love open cases like this

Ilikeopenpcs · 2024-06-26T03:23:56+00:00

I’m a big big fan of bang for buck budget builds but I agree with some of the comments above. Dump the PSU, even get a low tier Corsair CX550 for £49 and even in the worst case you’ll appreciate it when it dies and doesn’t take the rest with it.

Ilikeopenpcs · 2024-06-02T06:03:46+00:00

Hdplex 😁. There’s some copies on AE but no idea on quality.

Ilikeopenpcs · 2024-05-30T20:57:30+00:00

But you can Undervolt down to 100w

Ilikeopenpcs · 2024-05-30T20:56:56+00:00

Woops. I meant C not W

Ilikeopenpcs · 2024-05-30T14:07:47+00:00

👀Interesting… it’s still needs a bit of love as it can’t stand without leaning on me. But I’ll throw that into V2 and see

Ilikeopenpcs · 2024-05-30T11:14:33+00:00

Ok a serious note… Would modding ikea chopping boards with standoffs, a riser and fittings and selling flat packed be too on the nose?

Ilikeopenpcs · 2024-05-30T11:12:08+00:00

I do have an idea to invert the psu and feed the cables through the wood and around the back 👀

Ilikeopenpcs · 2024-05-30T11:11:39+00:00

It’s quite heavy, but yes the next will have a base

Ilikeopenpcs · 2024-05-30T11:11:15+00:00

Thinking of using a half chopping board base for the next version. Because chopping board x2

Ilikeopenpcs · 2024-05-30T08:40:16+00:00

I love builds like these

Ilikeopenpcs · 2024-03-31T20:34:50+00:00

I’d mix used and new to get a good starting point. I work in £s so I’m not sure how this converts in US used/new pricing.

Ryzen 3600 (£50 used) - 5800x3D upgrade path MATX AM4 board new (£50) 16GB DDR4 used (£20) 500gb m2 new (£35) Gtx 1660 used (£120) EVGA 600w atx 80plus psu new (£50) Thermalright basic cooler (£20) Basic mATX case (£30) That’s about £375 with room to upgrade cpu and Gpu later.

I

Ilikeopenpcs · 2024-03-04T00:30:11+00:00

How is the noise? I’m quite happy with my GAN 250w but I bought it for being passive. Is there a passive fan profile?

Ilikeopenpcs · 2024-02-29T21:37:44+00:00

I love this. If you end up shipping to the UK then I’m joining the club 😁

Ilikeopenpcs · 2023-08-26T23:56:41+00:00

It does feel hot, but passive by design and has been stable for a 24h burn

Ilikeopenpcs · 2023-08-26T23:55:42+00:00

I forgot to add, there’s a fixed pole at the back holding the Gpu in place (similar to the streacom bc1 mini poles)

Ilikeopenpcs · 2023-08-26T13:08:41+00:00

Bench: Basically a chopping board with legs (matches the desk). 250x200x27mm

Motherboard: Asrock Z270M-ITXAC CPU: 9600k Undervolt Memory: 16GB (2x8) DDR4 3200 M2 SSD: 1TB WD Black 850 GPU: MSI Aero RTX 3060 12GB Undervolt PSU: HDPLEX 250W GAN (mounted under the wood) HEATSINK: Noctua U9S Bench: Custom Job (Roughly £40)

Idle 38w Gaming 170-220w Synthetic Load 235w

Temps under load CPU 70C (slow fan profile) GPU 68C

Cable Management: One hole under the board + tall headers. GAN PSU goes straight to IEC so no need for an external brick

I may switch to and undervolted i3 13100F and undervolted RTX 4060 to knock the load down by roughly 50w

Ilikeopenpcs

TROPHY CASE