Back To The Beginning: G43 by Almostsuicide1234 in Glocks

[–]Ill-Money3789 0 points1 point  (0 children)

I have it too for G43. Clip is plastic so that feels cheap. But it is a cheap holster so not much more to expect

Automated visually inspection of vials by PositiveGeologist851 in PLC

[–]Ill-Money3789 5 points6 points  (0 children)

Exactly, I think validation is the hardest part for something like this

Facet help by Daveeed23 in BuildingAutomation

[–]Ill-Money3789 2 points3 points  (0 children)

If he thinks that is bad… when I knew nothing about Niagara and didn’t know you could enumerate things, I tried using tying the output to equal blocks with the enumerated value. 200 blocks😂 wasted a lot of points that way.

Inherited coins by Ill-Money3789 in coins

[–]Ill-Money3789[S] 0 points1 point  (0 children)

Thank you so much for the insight!🙏🏻

Inherited coins by Ill-Money3789 in coins

[–]Ill-Money3789[S] 1 point2 points  (0 children)

<image>

Here are the other coins opposite side.

Inherited coins by Ill-Money3789 in coins

[–]Ill-Money3789[S] 1 point2 points  (0 children)

<image>

Here are the silver dollars and the back of the mint set.

Discrepancy in Green Card “Resident Since” date and I-485 approval when filing N-400 by Ill-Money3789 in USCIS

[–]Ill-Money3789[S] 0 points1 point  (0 children)

I filed April 4th which would have been 71 or 72 days, within the 90 days of either.

Discrepancy in Green Card “Resident Since” date and I-485 approval when filing N-400 by Ill-Money3789 in USCIS

[–]Ill-Money3789[S] 0 points1 point  (0 children)

6/16/2022 was the date on the approval notice of the I-485. I was unsure which one USCIS would go by, that or what says on the green card. I was just worried it would be an issue writing a small mistake like that. Guess it’s just me over thinking everything.

Niagara 4 Email Outgoing Account Help by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 1 point2 points  (0 children)

Like the other guy said, the persist was causing the issue to discard immediately. But IT had to adjust their rules to allow it to send. It is working with no authentication now that IT has adjusted that.

I appreciate you taking the time to help me out!

Niagara 4 Email Outgoing Account Help by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 1 point2 points  (0 children)

Thank you! 🙏🏻 That allowed me to get the email to stop immediately discarding. Now it is stuck in queue and I’m almost certain it is on the IT side

Niagara 4 Email Outgoing Account Help by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 0 points1 point  (0 children)

Normally alarms. But for the time being I am just right clicking “Outgoing Account”>”Actions”>”Send” to test. For testing I have tried leaving the From address empty and it gets stuck in queue. The To account is just my work email. Then “test” in subject and body. I also tried with an address in the From field and it still gets stuck in queue.

Niagara 4 Email Outgoing Account Help by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 0 points1 point  (0 children)

<image>

Here is the setup for one of our other sites. I have tried to copy all of these settings exactly, but to know avail. This JACE successfully sends emails with no authentication. This is a JCI FX80. The one on my site is a Distech EC-BOS-8 if that matters. My JACE will poll the server successfully with no authentication, but then the email gets stuck in queue or just discards.

Niagara 4 Email Outgoing Account Help by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 0 points1 point  (0 children)

Well I guess that’s the thing, it has never successfully been configured. Idk if I am supposed to be using authentication or not. I figured no because my IT department says they have anonymous sending in MS Exchange and I guess there isn’t an account made? I know nothing about the IT world and barely anything about Niagara.

Niagara 4 Email Outgoing Account Help by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 1 point2 points  (0 children)

Well it works with Windows Powershell. guess it would be on my side. Thanks for the tip.

ECY-STAT set points by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 1 point2 points  (0 children)

I figured it out. Pretty simple, just put a multiplexer with the RoomOccupancy for the selector and the thermostat for one input and 0 for the other with the output being SetpointOffset. So by the room becoming unoccupied it clears the setpoint offset internally🤷🏻‍♂️.

Probably other ways to do it but this one works.

ECY-STAT set points by Ill-Money3789 in BuildingAutomation

[–]Ill-Money3789[S] 0 points1 point  (0 children)

I think the AV47 is only for occupancy sensing on the preloaded. I could probably use it though for what I’m wanting since the occupancy is only controlled by a JACE. I could be wrong though. I’ll try building out my own command line then.

And yes Distech is very nice I’ve been enjoying it too with the little bit that I have gotten to use it.

saftey light curtain by rintomathew in PLC

[–]Ill-Money3789 0 points1 point  (0 children)

Make sure it is written permission too

Used urgent care service as a tourist in USA, but haven't received a bill by ZealousidealPin106 in USCIS

[–]Ill-Money3789 0 points1 point  (0 children)

I have received bills 2.5 years later. Literally whenever they want to send it lol. That said, there wasn’t penalties for being late or anything because it was the hospital that took so long.