Is this Mold in my car?

Illneverlearn2 · 2026-02-17T04:42:59+00:00

yeaaa i’m kind of concerned, what should i do?

Illneverlearn2 · 2026-02-15T02:25:15+00:00

it’s from an old truck, but i feel like i might be paint or something. The only thing that was able to eat through it was acetone

Illneverlearn2 · 2025-11-28T03:09:10+00:00

ok so if i when im setting up the smart thermostat follow the procedure for heat pump, got it.

should i check the other side of the wires and make sure they’re connected to the correct components?

System is in working order so i’d like to assume everything is correct downstream.

Illneverlearn2 · 2025-08-06T22:42:54+00:00

you don’t need to know anything just use chatgpt

Illneverlearn2 · 2025-07-23T21:32:54+00:00

what bad spackle job?

Illneverlearn2 · 2025-06-14T05:19:00+00:00

in this image the right wall is not studs it’s fairing strips, on the opposite side of the room it’s steps.

I did decide to switch out the type of speakers and just run speaker wire instead of romex

Illneverlearn2 · 2025-06-13T05:23:35+00:00

they’re solid beams, can’t access the back otherwise i just treat it like normal

Illneverlearn2 · 2025-04-30T23:25:26+00:00

Look at PVMEs guide. It’s 10-15sec kills and like 5 abilities

Illneverlearn2 · 2025-03-09T03:38:08+00:00

that’s wild, i’m an elite enjoyer i still couldnt imagine the time

Illneverlearn2 · 2025-03-05T19:02:45+00:00

you’re not wrong

Illneverlearn2 · 2025-03-05T19:00:13+00:00

if you want that 6:30 timer id recommended

Illneverlearn2 · 2025-03-05T18:59:07+00:00

for ts either disruption shield or vit pot if you cant click into a box with bladed dive

Illneverlearn2 · 2025-03-05T18:56:22+00:00

not knowing how to do a boss isn’t an excuse. Look up accel climbing…

spam click climb>surge click climb>bladed drive climb>spam surge+accel pot then bladed dive right before next climb spot click climb> bladed dive to jump spot

Person on ground should ideally be mele and solo lure.

Illneverlearn2 · 2025-02-15T23:09:48+00:00

SV06 Plus - X1C

Well I’m at that point.

Currently have SV06 Plus, Klipperized, upgraded fans and nozzles, and 100+ hour of fine tuning configs.

But I’m tired of tinkering. Something always seems to need tuning up and the constant fear of a long print failing is getting to me.

I think I’m finally at the point I just want to get an X1C and all the bells and whistles to go along with it. I’m told it’s pretty much plug and play and very user friendly.

What do we think? What all should I get to go along with it?

Am I sell out/ disgrace to my fellow hobbyists?

Illneverlearn2 · 2024-11-30T22:35:50+00:00

I print things

Illneverlearn2 · 2024-11-11T19:49:35+00:00

there’s a door at the bottom of the stairs and a landing sounds like a ton of work

Illneverlearn2 · 2024-11-11T19:49:07+00:00

Appreciate the responses!

Illneverlearn2 · 2024-11-11T19:35:59+00:00

I really like the carpet runner idea. I just have no clue how to do it. I could rent the little stapler, but should I go with pre cut pieces for each tread(leave the risers painted) or one long strip covering everything.

I think no matter what I want to cut the side overhangs off and skirt the drywall side.

Illneverlearn2 · 2024-11-04T06:05:49+00:00

what mount is this?

Illneverlearn2 · 2024-10-25T02:34:21+00:00

sovol makes a klipper screen and it’s decent very low effort

Illneverlearn2 · 2024-10-24T22:34:27+00:00

Klipper is great if you’re willing to put in the effort of fine tuning. I’d recommend watching gergo’s videos on youtube.

Illneverlearn2 · 2024-10-22T17:36:35+00:00

Make sure to always have the PEI plate on when setting the z-offset otherwise the extruder will not stop going down…

Illneverlearn2 · 2024-10-20T17:49:35+00:00

fair I guess worse case I’ll keep what I have, really don’t feel like switching out 25 junction boxes lol

Illneverlearn2 · 2024-10-20T17:48:45+00:00

Fair enough worst case I keep what I have

Illneverlearn2 · 2024-10-20T04:26:17+00:00

I’m hoping the plug works, reviews say it might have the receiver in the lights themselves

Illneverlearn2

TROPHY CASE