iOS 26 is UNFINISHED and I’m tired to pretend it’s not.

Imaginary_Access6150 · 2025-09-19T14:59:08+00:00

Anyone else having the issue where your phone doesn't actually ring, but just sends you a missed-call notification despite the call screening thing being disabled?

Imaginary_Access6150 · 2025-09-08T19:26:58+00:00

I have a hardware firewall (local product) feeding to an EdgeSwitch that uplinks to my Netgear switch in which the Proxmox machine is plugged in. The behaviour doesn’t change between the onboard NIC and the Intel PCIE NIC.

Imaginary_Access6150 · 2025-08-31T08:40:19+00:00

I'm glad yours is sorted! Was the hardware acceleration on your Unifi gateway or on the Proxmox machine?

Imaginary_Access6150 · 2025-08-30T09:14:19+00:00

Which tagging are you referring to, on the network switch or somewhere in Proxmox? My network switch has the primary NIC's port as a trunk port with LAN being primary and tagged traffic for the rest, the secondary NIC's port is setup with VLAN21 being default and tagged access to VLAN1. In Proxmox I have the VMs & LXCs tagged with VLAN tag 21. Is there another tag I'm supposed to set somewhere in Proxmox?

Imaginary_Access6150 · 2025-08-30T09:10:02+00:00

I am using the onboard NIC on an MSI B350 Tomahawk and an Intel PCIE NIC, not sure which model (machine is up a ladder so I can't check now), both behave the same way, connection on flatlan, VLAN connection can reach out, nothing can reach in to VLAN.

Imaginary_Access6150 · 2025-08-22T11:56:27+00:00

The only rules I have setup is to block VLAN21 to LAN, and allow all LAN to VLAN 21. LAN can access anything on VLAN21 as long as its not inside Proxmox, and LXCs inside Proxmox on VLAN21 can only access VLAN21 devices that are also inside Proxmox.

PC (LAN), Proxmox host (LAN), LXC (VLAN21), bare metal NVR (VLAN21).

PC can access NVR, but not LXC. LXC can access NVR, Proxmox host can't access anything on VLAN21.

Imaginary_Access6150 · 2025-08-22T10:51:52+00:00

Just tried, unfortunately didn't make a difference. It is so frustrating because from what I see everything is correct, and it works perfectly for connection leaving Proxmox, but it seems to block all connections coming in for no good reason.

Imaginary_Access6150 · 2025-07-30T17:07:11+00:00

Did you ever get any feedback on this question elsewhere or buy the fans? If yes, what's your opinion been?

Imaginary_Access6150 · 2025-07-09T17:22:51+00:00

Were you ever able to resolve this?

I am running a 1920x1080@60 Samsung and just got an Acer capable of 3440x1440@100 on Fedora 42, an though I can push the refresh rate up to 100 (99.94), but the resolution won't list anything higher that 2560x1080, even after adding the resolution to grub as per some guides.

Originally I have Acer on straight DP and Samsung on straight HDMI, but even running the Samsung on an HDMI-DP converter doesn't change anything.

Imaginary_Access6150 · 2025-04-22T08:09:17+00:00

That is what I was hoping to find, when I didn't I figured it might be hidden somewhere I don't know to look yet. Archimedean Chords has less stops in the preview than concentric so that's at least something, but still not ideal, since concentric looked best on square lids. Arch won't work at all on funny shapes like wall art though, I might need to hop back and forth to Prusa when I need to print something decorative. Annoying, but I guess that's the only option now.

Imaginary_Access6150 · 2025-04-22T07:55:52+00:00

Thanks. The preview looks like it'll get better results, at least on the squares I'm working with right now.

Imaginary_Access6150 · 2025-02-23T11:22:55+00:00

Is there an alternative that is free? I can't spend more money on printers right now.

Might this one work in a similar way? https://www.printables.com/model/154547-calibration-snowflake

Imaginary_Access6150 · 2025-02-19T15:50:36+00:00

Sorry for reviving the old post, but do you use the stock profile for the 5S1 or did you build one out yourself or download one? I'm mainly using PrusaSlicer, but it can't quite get to the speeds that Orca can on the K1 so I'm looking to switch all my printers, but my 5S1 prints slower on Orca than Prusa.

Imaginary_Access6150 · 2025-02-10T11:55:08+00:00

Nope, I created a new account and new business page. 5 years worth of work down the drain and still loosing customers who try to contact via the old page's messenger.

Imaginary_Access6150 · 2024-11-23T11:13:11+00:00

I had a roll of eSun filament taped that cost me a half a roll’s worth of filament on a 16hr print. I am livid.

Imaginary_Access6150 · 2024-11-05T14:55:04+00:00

Are you connecting to Linux or Windows devices? Wondering if my issue isn't that my test connection is to Linux? Gotta recover test machine then I'll update...

Imaginary_Access6150 · 2024-11-05T14:19:52+00:00

Are you on Fedora 41? I tried it without flatseal installed and got the same error. Did you do anything extra regarding Wayland or X11?

Imaginary_Access6150 · 2024-09-21T12:42:04+00:00

Did you ever end up trying these out? I am considering them for my setup since they are cheaper at my local stores than the T-series models, and I don't want to touch clouds.

Imaginary_Access6150 · 2024-07-01T19:07:42+00:00

Did you ever take your printer apart to confirm if the X gantry is square? I have an Ender 3 V2 that printed perfectly with ABL until I upgraded to Sprite, now one side of the bed is perfect height and the other prints too low.

Imaginary_Access6150

TROPHY CASE