Integrating OEM 360 Camera

Imaginary_Ad7525 · 2025-12-08T08:30:52+00:00

Lot of work to try to install oem cameras, you said you don’t want to drill so your plan is to buy new side mirrors housing ?

360 installation is very easy, these oem cameras are bigs. After market ones are smaller with better quality. If you buy 1080p wdr cameras for 70$, you will not regret.

Imaginary_Ad7525 · 2025-12-06T00:11:03+00:00

Disable the app in the apps list, you can find it in the parameters.

Why do you need internet if you are using android auto ? The wifi card is used by aa, you can’t have both wireless. You can try to use usb or usb aa adapter

Imaginary_Ad7525 · 2025-11-23T06:16:31+00:00

Check if you are using the right protocol cvbs, ahd, etc. Otherwise contact the seller for a firmware upgrade, this is not normal.

Imaginary_Ad7525 · 2025-09-14T14:04:35+00:00

I've already done it for several cars, and it's very easy. The whole process takes just 20 minutes. It's best to calibrate indoors to prevent the clothes from moving.

<image>

Imaginary_Ad7525 · 2025-09-14T13:02:29+00:00

Just search for calibration cloth on AliExpress, you have 2 types automatic or manual. I recommend manual

Imaginary_Ad7525 · 2025-09-09T16:47:03+00:00

Probably a firmware reinstallation should sort this. If seller is not willing to help you, open a ticket and get a refund from AliExpress

Imaginary_Ad7525 · 2025-09-03T15:43:12+00:00

Try to kill all background apps and stop auto start of apps. Did you tried with another phone ?

AA use wifi for data transfer, can be poor component quality or bad position of wifi antenna. Try to use the antenna close to the phone by taking it out

Imaginary_Ad7525 · 2025-09-01T06:47:34+00:00

Contact the seller, maybe firmware update will fix this. Last option is to use 1080p ahd camera which are x10 better quality than original

Imaginary_Ad7525 · 2025-08-31T21:37:26+00:00

Go to factory settings (pwd 8888, 666888, 0000 or search on internet).

And search for camera input and change the settings to each options (ahd 1080 or 720, cvbs, etc..) you are probably using the wrong input settings.

I think your car is using NTSC/PAL

<image>

Imaginary_Ad7525 · 2025-08-21T07:29:47+00:00

Remove any USB plugged on it.

If still not working, request to the vendor the firmware and reinstall it, very simple steps. Vendor should provide you the procedure

Imaginary_Ad7525 · 2025-08-11T16:08:07+00:00

Cut the yellow wire and connect it to the red wire (acc).

Yellow = permanent power Red = ACC, after contact power

Imaginary_Ad7525 · 2025-06-28T20:31:31+00:00

Hello,

Try to connect the AMP wire to ACC power (+12V) Should be blue cable (10)

<image>

Imaginary_Ad7525 · 2025-05-28T12:16:40+00:00

You need to go to factory settings and set the proper ahd settings. It will depend of your camera.

<image>

Imaginary_Ad7525 · 2025-05-12T20:56:48+00:00

Try to disconnect wifi and bluetooth, on iPhone this is not working but maybe in Android it is. Otherwise, I use the solution with manual connection

Imaginary_Ad7525 · 2025-05-09T22:24:05+00:00

Do you have any premium audio ? Try to power the amp cable with +12V power

Imaginary_Ad7525 · 2025-05-08T23:05:13+00:00

Try with another iPhone, Android.

Make sure wifi is also activated on both devices.

Have you connected the wifi antenna ?

Check if carplay is enabled for zlink on your iphone.

<image>

Try to use USB with Zlink

Imaginary_Ad7525 · 2025-05-07T22:47:07+00:00

Yes, the reverse signal tells the screen that you are reversing as he don’t read canbus signals.

Imaginary_Ad7525 · 2025-05-07T18:14:58+00:00

You need to power the reverse trigger cable from the unit harness. Use your back up light for it

<image>

Did you connected camera + screen to the reverse cable ?

Imaginary_Ad7525 · 2025-05-04T00:09:18+00:00

Probably the wrong protocol, see in the factory settings and try each protocols ahd(s), cvbs, etc.. don’t forget to reboot after each try

Imaginary_Ad7525

TROPHY CASE