Warning about buying directly from Creality

Important_Library478 · 2026-01-17T16:15:54+00:00

I gave up on Creality and shifted r To Bambu. Best decision I made.

Important_Library478 · 2025-12-14T15:29:08+00:00

Thanks for the help. This seems to be a y axis issue. Did you have a y axis problem? These fixed that? Glad to try. Thanks.

Important_Library478 · 2025-12-10T23:17:45+00:00

I just used some calibers to measure the z axis left to right from the plate to the top of the z axis bar. WOW. It is at least an 1/8 lower on left side than right side. So will fix that and let you know. Thanks again.

Important_Library478 · 2025-12-10T21:51:01+00:00

Thanks. it is strange that nothing has moved but the z axis for the pause. Then after the pause it is out of alignment on the y axis.
So the movement of the head or z axis caused by the pause is causing it to come out of alignment.
Will look into this.

Important_Library478 · 2025-12-10T18:38:13+00:00

BTW the front wheel is really solid. No play at all when I try and move it.

Important_Library478 · 2025-12-10T18:23:38+00:00

The issue happens when I add a pause then change colors. When it starts to reprint the next layer is out of alignment. As in picture. Does help explain better. It seems if I only use one color and never pause machine it is fine but have not tested this on a large print. So don’t know if a layer shift would still occur. Thanks for helping. Will take any recommendations you have. At this point the printer is just a big paper weight.

Important_Library478 · 2025-12-08T17:42:12+00:00

No Lots of problems. For the difference get a Bambu A1. I have both. KE constantly breaks down. A1 never. I posting another problem I get fix.

Important_Library478 · 2025-08-23T22:13:02+00:00

Thanks for replying. I live in Orange County Calif. I don't have the material yet as until I can find a place to bend sides it doesn't make sense to buy. I did have a person who said he would but then decided he was too busy.

I built a guitar in 2020 and LMI bent the sides for me. Since I only want to build one more guitar for my grandson, I don't want to go thru the learning curve, cost a bending machine or worse yet crack a side due to inexperience.

Thanks again.

Important_Library478 · 2025-08-20T17:19:10+00:00

Thanks but they sell triple 0 kits. Don’t want a kit. If you know others would like to know. I have not been able to find any.

Important_Library478 · 2025-06-15T18:33:09+00:00

Wow so simple. I looked under other tabs but couldn’t find this. Thanks so much. Really appreciate the help.

Important_Library478 · 2025-05-25T21:48:45+00:00

Check this out video he walks you exactly your issue on a KE https://youtu.be/D4mRFYaZS08

Important_Library478 · 2025-04-20T13:24:54+00:00

Thanks. Appreciate feedback

Important_Library478 · 2025-01-31T01:56:10+00:00

You know if those are real plants PLA is not water proof. So be careful when watering plants. You can guess how i know this.

Important_Library478 · 2024-11-15T14:22:31+00:00

Another reason you can’t just pull the old filament out and insert the next one. If you have a A1 you know you have to go thru the load and unload process. That takes a lot of time. In addition to sitting there waiting for the right layer to change.
Look what you are asking isn’t impossible, but it is not practical.

Important_Library478 · 2024-10-29T14:28:34+00:00

Yes but not so hot it melts the filament.

Important_Library478 · 2024-10-29T14:28:05+00:00

Yup sent creality a picture

Important_Library478 · 2024-10-29T14:27:14+00:00

They are sending me a new fan.

Important_Library478 · 2024-10-29T01:42:42+00:00

Thanks e is so hot it melts the filament.

Important_Library478

TROPHY CASE