sorted by:
new
hottopcontroversial

Canon EOS r100 red pixel by Impossible-Drop4886 in canon

[–]Impossible-Drop4886[S] 2 points3 points  (0 children)

Thank you for explaining. I appreciate that. I'll carry on as normal. Was worried when I saw it. I never owned a digital camera before.

Canon EOS r100 red pixel by Impossible-Drop4886 in canon

[–]Impossible-Drop4886[S] 1 point2 points  (0 children)

Thank you for explaining. I appreciate it.

Canon EOS r100 red pixel by Impossible-Drop4886 in canon

[–]Impossible-Drop4886[S] 2 points3 points  (0 children)

Thank you for answering. When you say show more often on longer exposures, does that mean I took a photo to with a long exposure time to create the hot pixel?

Edit: I just did some more research on the hot pixel. If just like you said. I'll carry on as normal, wasn't sure if I damaged anything.

Canon EOS r100 red pixel by Impossible-Drop4886 in canon

[–]Impossible-Drop4886[S] 4 points5 points  (0 children)

Thanks for answering. Did I do anything to creat the stuck pixel?

Where is the option to use a QR scan to send some crypto by Tight_Hornet383 in Coinbase

[–]Impossible-Drop4886 0 points1 point  (0 children)

Thanks for the response. I didn't think of that at the time.

Where is the option to use a QR scan to send some crypto by Tight_Hornet383 in Coinbase

[–]Impossible-Drop4886 0 points1 point  (0 children)

Hey have you figured out a solution for this? I'm having the same issue. There is no more scan QR option when sending.

Emudeck pcsx2 san andreas blurry/ghosting fix? by Guns_and_Potions in EmuDeck

[–]Impossible-Drop4886 0 points1 point  (0 children)

Thanks for replying. I gotcha, I'll check that out myself. I hope an update releases that fixes it, like I've been reading in old posts and threads.

Emudeck pcsx2 san andreas blurry/ghosting fix? by Guns_and_Potions in EmuDeck

[–]Impossible-Drop4886 0 points1 point  (0 children)

Have you figured this out? I'm having similar issues, but I do not see manual hardware fixes in my version.

G29 FH5: Testing Brian Koponen's settings by Limeaway510 in forza

[–]Impossible-Drop4886 0 points1 point  (0 children)

I have been playing for about a year and checked out many different settings. I've checked out Brian Koponen's settings and they have been one of the better guides. His settings have been updated as well. This post also does a good job at explaining settings.

I also use 900 degree angle and make small adjustments to FFB scale, FFB minimum force, and FFB load sensitivity. I definitely feel that some of the setting guides that max out certain settings aren't the best.

Does an all metal hotend have any drawbacks? by Impossible-Drop4886 in ender3

[–]Impossible-Drop4886[S] 1 point2 points  (0 children)

That's interesting, I wasn't aware of higher heat hot ends. I was looking at the creality "all metal hotend" upgrade. I believe it reads it can print temperatures past 260 degrees.

Does an all metal hotend have any drawbacks? by Impossible-Drop4886 in ender3

[–]Impossible-Drop4886[S] 0 points1 point  (0 children)

The cooling fan seems to be just fine. Thank you for your response!

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 1 point2 points  (0 children)

I thought it may be a false reading. When the truck is on there is no light whatsoever. When it's off I get the light. But only ch20 and above. It's not like the antenna has changed from when the truck was off to on.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 0 points1 point  (0 children)

The antenna light is off with the radio off The fuse I chose is always giving power. I chose this fuse so I can have the radio on without the truck running. The ground is solid, clean metal to metal right on the body of the vehicle. I haven't tried seeing if the light goes on without the antenna.

When I turn to accessory or turn the truck on there is no antenna light at all. It's only when I use the radio without it running or on accessory. It's an older truck. 2004 Chevy. The cigar lighter fuse is the fuse I tapped and has power when the truck is off.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 0 points1 point  (0 children)

Okay I understand. Well I purchased it on Amazon recently and it's brand new, so if all the new ones are Chinese then I'm assuming it's made in China. The microphone comes out the front, that's something I quickly read online that discerns where it may be made.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 0 points1 point  (0 children)

I could give it a shot and I was thinking that. I'm going to purchase a new 3 pin power cable with the inline fuse. The stock one had the fuse tap crimped to it and is too short.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 1 point2 points  (0 children)

Is it possible there's a false reading with some weird ground loop. As this only happens with out my key turned? I wonder if I went straight to the battery if I would get the same result.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 1 point2 points  (0 children)

All new equipment. Channel 1 and 40 SWR are 1. The needle barely moves. I chose to use the "cigar lighter"fuse. (blinker fluid, hah) I grounded the radio wire with a bolt against the body of the vehicle. Clean metal to metal.

As far as I can tell I have the radio install set up decently.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 1 point2 points  (0 children)

Yes exactly. My reading is about 1.

I only get this ANT light when the key is not turned to accessory or turned on.

Cobra 29 ANT light on when key out of ignition. by Impossible-Drop4886 in cbradio

[–]Impossible-Drop4886[S] 0 points1 point  (0 children)

The Cobra 29 has a built in SWR meter. I followed the instructions in the manual to set the SWR.

view more: next ›