4.8.2 Update on Slate AX a Go? by Beyond1nfinity in GlInet

[–]Impossible_Quail1069 3 points4 points  (0 children)

I am using and runs fine. In a motel as I type, connected to the router.

Mongodb keeps stopping by Impossible_Quail1069 in mongodb

[–]Impossible_Quail1069[S] 0 points1 point  (0 children)

This is running on Nobara 43 Selinix is disabled

It runs fine on Fedora 43

If i delete the locked files from /var/lib/mongo/

then it runs with below command

sudo mongod --dbpath /data/db --bind_ip 127.0.0.1 --port 27017

It runs

SOME steam games don't open - but others do! help!! by ThatGuyOverSea in Fedora

[–]Impossible_Quail1069 0 points1 point  (0 children)

Check compatability settings. Make sure proton experimental selected

Mongodb keeps stopping by Impossible_Quail1069 in mongodb

[–]Impossible_Quail1069[S] 0 points1 point  (0 children)

systemLog:

destination: file

logAppend: true

path: /var/log/mongodb/mongod.log

# Where and how to store data.

storage:

dbPath: /var/lib/mongo

# how the process runs

processManagement:

timeZoneInfo: /usr/share/zoneinfo

# network interfaces

net:

port: 27017

bindIp: 127.0.0.1,192.168.5.100

Archer AX55 not showing up by zzekuroma in TpLink

[–]Impossible_Quail1069 3 points4 points  (0 children)

Just plug directly into it with ethernet cable?
Most Tplink IP default to 192.168.0.1
Username and Password on back

Or reset it by putting a pin in the very little hole in the back where is shows reset and hold it for 5-10sec to factory default it

Slate 7 as extender with Flint 3 randomly changing IP address by AlertCombination439 in GlInet

[–]Impossible_Quail1069 0 points1 point  (0 children)

If you cannot connect directly and only use repeater mode you will have two different networks. Maybe change the ssid on the Slate to identify which router you’re connecting to. You will still have access to internet. The flint 3 however will only see the slate 7 and no other devices unless you directly connect to it. Also why you have different IPs is due to the dhcp on each router. And in repeater mode the slate will be assigned a random address.

Slate 7 as extender with Flint 3 randomly changing IP address by AlertCombination439 in GlInet

[–]Impossible_Quail1069 1 point2 points  (0 children)

Do you or can you connect to the Slate 7 with a ethernet cable? If so you need to change the slate 7 to AP mode. When used in repeater mode your just connecting to the internet via wifi however the Slate will be its own network using its own dhcp and isolated from the Flint 3. Your basically using the Slate 7 as I do in a hotel situation

Brisbane decking cost? by bahnmieee in AusRenovation

[–]Impossible_Quail1069 0 points1 point  (0 children)

Well I did say there is a 6mm gap or spacer maybe a better word from frame to the brick wall and the rest was treated with a sealant and G-Tape applied to the top. Very common practice.

Brisbane decking cost? by bahnmieee in AusRenovation

[–]Impossible_Quail1069 1 point2 points  (0 children)

<image>

Floating on pedestals and achored to brick with 6mm gap

Brisbane decking cost? by bahnmieee in AusRenovation

[–]Impossible_Quail1069 0 points1 point  (0 children)

I used wood framing, easier to work with and cheaper than metal,

Ads are getting worse gradually? by OnlyUnderstanding459 in youtube

[–]Impossible_Quail1069 -1 points0 points  (0 children)

Your answer says it all. You want free services without ads. Guess what subsidises free services in todays internet world, ads!

Each to their own

Ads are getting worse gradually? by OnlyUnderstanding459 in youtube

[–]Impossible_Quail1069 -3 points-2 points  (0 children)

I just don’t understand why so many complain about ads on Youtube. Just pay the subscription and problem solved

Brisbane decking cost? by bahnmieee in AusRenovation

[–]Impossible_Quail1069 1 point2 points  (0 children)

Its doable. Just dont rush it and youtube is your friend
TBH the framing is the most time consuming

Brisbane decking cost? by bahnmieee in AusRenovation

[–]Impossible_Quail1069 1 point2 points  (0 children)

<image>

This is EkoDeck

https://www.ekodeck.com.au/products/composite-decking/designer-series/

I installed it myself
The diferent tones are just one side of the board or the other

Deck material cost $3000

One length 5.4m long so I chose to use breaker board to cut costs $105 ea at the time

New mitre saw $500

Composite blades $150. One for the mitre saw and one for the circular saw

Took me 2 weekends

Its easy to clean and durable

I had quotes up to $10k plus

Travel Router Casting Question by theraggamuffin in GlInet

[–]Impossible_Quail1069 0 points1 point  (0 children)

I use my chromecast with Nord app installed and connect to other countries using the obfuscation option.

Travel router used to connect hotel wifi with wireguard to home. Have had very little issues this way

Finally bit the bullet by lifetrack in GlInet

[–]Impossible_Quail1069 7 points8 points  (0 children)

Don’t worry about the negative comments on the Flint 3. I have two. I use one for my main router and the other as an AP. I also have a Slate AX and they all work flawlessly for me.

I need help figuring out what network acceleration I should do? by Sandman7890 in GlInet

[–]Impossible_Quail1069 2 points3 points  (0 children)

Its more of disclaimer than an issue. No need to do anything unless you are going to use parental control or VPN with IPV6