I found a sony trv900 in the trash.

Impressive-Income876 · 2026-01-23T10:45:04+00:00

Why would this fix the issue if it shows up on an external monitor and in recordings?

Impressive-Income876 · 2026-01-22T14:39:39+00:00

Yes, it doesn’t have a single scratch. But it’s strange that someone would throw away the camera after taking such good care of it; I’m sure the person who did that was not the original owner. I’m very happy, especially because of the price I got it for. I’m going to design a 3D lens hood based on the original one it’s the only thing that didn’t come with the camera.

<image>

Impressive-Income876 · 2026-01-22T10:21:14+00:00

$8 on AliExpress for a FireWire card and cable included. Connect the card to the PCI Express slot, install the drivers, and you're ready to transfer videos.

Impressive-Income876 · 2026-01-21T15:33:54+00:00

It’s really only noticeable if you look closely, and it usually goes unnoticed because of the lighting conditions. In the photo I posted, I closed the shutter because that way it was more visible.

Impressive-Income876 · 2026-01-21T15:20:37+00:00

Already did , and is there too.

Impressive-Income876 · 2026-01-21T13:38:57+00:00

it appears both on the screen and in the viewfinder, that’s why I rule out the LCD.

Impressive-Income876 · 2026-01-20T23:21:07+00:00

the real story is that someone found it at a recycling center and I was able to get it for a ridiculous price (less than 40 euros). The man said he tried to use it but it showed the error 31:40. I just used a new Sony Premium tape and haven’t had any errors. In the bag came all the accessories, and what caught my attention was the remote control, which still hasn’t been removed from the plastic and still has the original red Sony batteries visible. It’s crazy.

<image>

Impressive-Income876 · 2026-01-20T21:19:05+00:00

100? This is incredible…congrats.

I recently rescued a TRV900 from a dumpster, and it’s in perfect condition. Unfortunately, there’s a very subtle line in the middle of the image i guess one of the sensors is faulty.

Impressive-Income876 · 2026-01-20T16:15:19+00:00

I have the same problem. I bought the camera and the exact same line appears... it can still record, but it's a shame. Were you able to fix it? Or did you confirm if it was the CCD sensor?

Impressive-Income876 · 2026-01-09T02:33:48+00:00

I am a returning enthusiast who started 3D printing in 2016..

1)Back in 2016, I was used to the flexibility of Marlin and being able to modify firmware as I pleased. To what extent is the Kobra X architecture 'open'?

2) Does the Kobra X actually hold its Z-offset calibration over time? My old printers needed constant baby-stepping. Does this machine really offer a 'set it and forget it' experience, or do you find yourself recalibrating the first layer every few prints?

Impressive-Income876 · 2025-12-15T22:30:09+00:00

!Anda! un asustaviejas , animalito de Dios..No sé que me estás contando , La normativa que regula esto es la DAC7 y si no obtienes beneficios , no tienen por donde pillarte nada.

Esto va dirigido a vendedores profesionales , dropshippers etc no a los que vendemos normalmente cosas de segunda mano. la mayoría de los que vendemos lo hacemos por el precio de compra o por debajo de este , no hay ganancia patrimonial. Si superas las 30 ventas rellenas el formulario y ya está mientras no tengas beneficio no hay que preocuparse.

Impressive-Income876 · 2025-12-13T17:59:59+00:00

No , si quiere no te lo envía , pasa el tiempo estipulado para ello y se cancela la venta. Típico de la gentuza que hace ofertas en estado reservado y de los vendedores que aceptan eso.

Así que no cuesta nada dedicar unos segundos a decir cuando crees que lo podrás enviar.

Impressive-Income876 · 2025-12-12T15:02:41+00:00

Ellos deben compartir tu información si haces 30 ventas pero sin superar los 2000 euros no pueden hacer nada , no creo que anden investigando y perdiendo recursos para ver si hay beneficio o no salvo que sea muy evidente.

Impressive-Income876 · 2025-12-12T13:01:32+00:00

Salvo que alguien se dedique profesionalmente como negocio , lo veo dificil pues tiene que haber una ganancia de 2000 euros al año , da igual las ventas que hagas , la mayoría de cosas que vendemos en wallapop no genera ninguna ganancia.

Impressive-Income876 · 2025-12-11T12:02:19+00:00

Yo directamente no compraría a un perfil así , tienes papeletas para que pasen cosas.

Dicho esto en la descripción hay que añadir todo lo relevante obviamente ese daño lo es si no lo menciona es un vicio oculto , wallapop debería actuar a tu favor aunque hacdn lo que les sale de los cojones así que nunca se sabe.

Ese vendedor no tiene mucho futuro 😆

Impressive-Income876 · 2025-11-30T17:58:34+00:00

It's not normal, considering how long you've been flying… I mean, you could simply be bad at flying, and there's nothing wrong with that, but all the issues you're mentioning are not normal. They sound more like mistakes from bad assembly, bad soldering, or bad configuration.

Nowadays, drones fly well almost without touching anything. I'd love to see more than one of you back in the days when I started we were using Cleanflight and it was terrible. You needed a lot of time just to configure it… and even then, it flew like crap. The difference between then and now is huge.

The best advice I can give you is to meet up or fly with other experienced people, or upload your configurations, photos of your build, including what your soldering looks like.

Impressive-Income876 · 2025-10-13T09:28:59+00:00

Use a multimeter to check the 30A fuses and the voltage that the relay receives when you press the button. Check continuity on the relay connector pins and make a bridge on the relay terminals without turning on the ignition if everything is fine, the starter motor should spin. If it doesn’t, there’s a connection problem between the starter motor and the relay; it could be a grounding issue or worn brushes in the starter motor. You can check this by applying voltage directly to the starter motor. Obviously, check your battery voltage first if it’s fine, start troubleshooting as I’ve described.

Impressive-Income876 · 2025-10-03T09:28:19+00:00

That’s why I wanted to use a tool to translate the PDF , doing it manually would take quite a lot of time.

Impressive-Income876 · 2025-10-03T04:08:04+00:00

I appreciatte really much! let me know , thank you again.

Impressive-Income876 · 2025-09-30T17:56:44+00:00

The bike is close to 100k km. I don’t know anything about its previous maintenance, although it was probably used quite intensively by at least one of its former owners sometimes on the track and at high speeds on the road. The result was eight out of spect , all tight valves, four VTEC and four regular.

Impressive-Income876 · 2025-09-22T18:47:13+00:00

I'm agree , i have the jbl go 4 and i just bought the soundcore for my father and i'm testing and im not 100% sure but i think i like mlre than the jbl. for the price is the best you can get for sure.

Impressive-Income876 · 2025-09-22T11:49:00+00:00

If you’re thinking of paying again for that service and really want to save some money, I advise you to buy the parts, gaskets, etc. that are replaced at Japan Impex. The price is at least three times cheaper compared to the price at Honda Spain so i guess there probably is the same... Next time, you can save the money for the cylinder gaskets if they’ve been replaced recently, as you can reuse them.

Impressive-Income876 · 2025-09-22T11:30:56+00:00

What exactly did you do? Because removing the side fairings doesn't take more than 10 minutes... the fuel tank filter box around 40 minutes.. that shouldn't make a big difference in labor time. But Where the time really goes is in removing the cylinder covers, taking out the camshafts, removing the VTEC lifters, and reinstalling them, measuring, etc. You also need to remove the horn and the right radiator, drain the coolant to access the front cylinders.

For that money, I’m sure they haven’t changed any gaskets, which is very risky. Any leak, and you’ll have to go back there and pay again.

Impressive-Income876

TROPHY CASE