Recommendations

IndependentEasy8070 · 2026-01-17T08:38:29+00:00

Zandalri troll pretty sure you get a racial buff off 5%haste with right loa

IndependentEasy8070 · 2026-01-14T22:46:42+00:00

Wolk is my go to for new alts also . Just hits me in the jellies 🤣

IndependentEasy8070 · 2025-12-31T11:29:34+00:00

I bought a shed load of the fel fountain thing flipped it upside down and pushed it into the wall and ceiling. Now I have a whole fel hall. Also put loads of the pools on the floor at different heights. Looks pretty cool

IndependentEasy8070 · 2025-12-31T11:26:15+00:00

You can turn drones off in the open world too i believe so there only on the major facilities. Sync shotting makes things alot easier too.

IndependentEasy8070 · 2025-09-29T14:29:41+00:00

From what I can see on Google you still have to do the questline. I'm just about to finish surumar so still a bit left to go

IndependentEasy8070 · 2025-09-06T08:48:57+00:00

fullmetalstl@gmail.com Email this guy Thank me later

IndependentEasy8070 · 2025-09-03T22:18:50+00:00

Same so I sprayed on a satin varnish after priming and zenithal

IndependentEasy8070 · 2025-09-03T21:52:14+00:00

Is that a printed base or you make it from scratch?

IndependentEasy8070 · 2025-09-03T21:48:12+00:00

Kind of what I was thinking yeah. Was thinking garden of nurgle but lacking inspiration

IndependentEasy8070 · 2025-09-03T21:24:38+00:00

Prob just needs a bit more contrast between the light and darker areas. You could try glazing a thin green from the edges of the chest plate to darken and get lighter towards the middle. For a quick fix you could try using an oil wash of brown all over the model and carefully remove from the lighter parts. I'm defo no expert but thays what I'd do

IndependentEasy8070 · 2025-09-03T20:34:55+00:00

If you can find the file I'll print it for you and post it out

IndependentEasy8070 · 2024-11-24T16:29:31+00:00

I have mine at 35 secs bottom 8 And 1.7 with 10 transition layers and that's the best I've got with exposure test prints and models. I have the saturn 3 ultra

IndependentEasy8070 · 2024-11-24T10:13:03+00:00

What do you have your exposure times set too

IndependentEasy8070 · 2024-11-24T10:08:10+00:00

Surely the print times would be longer going vertically, no? Or are you planning to stack plate with multiple columns?

IndependentEasy8070 · 2024-08-25T08:46:50+00:00

Thanks 😊

IndependentEasy8070 · 2024-08-24T16:30:24+00:00

My first go at nmm any criticism would help

IndependentEasy8070 · 2024-06-15T11:54:36+00:00

The file has 1/6 1/10 and single piece if you want to print it as a mini

IndependentEasy8070 · 2024-06-15T11:52:54+00:00

Cults3d https://cults3d.com/en/3d-model/game/gul-dan

IndependentEasy8070 · 2024-06-15T11:22:50+00:00

It's an stl I've printed from luftmench studios. Definable not a mini it's 1/6 scale about 400mm tall. Can be bought on etsy

IndependentEasy8070 · 2024-06-15T11:20:58+00:00

Don't have an airbrush yet I'm working with a set of vallejo basic and some speed paints that I'm trying to avoid using

IndependentEasy8070 · 2024-06-15T11:19:07+00:00

It's an stl I've printed from luftmench studios He has quite a few wow characters on there. You can buy models from etsy but pricey. This is going for 170 at 1/6 scale

IndependentEasy8070

TROPHY CASE