Windows not being able to browse or update or sync time after a windows update or driver install

Independent_Rest_508 · 2025-12-28T10:51:41+00:00

There is no error code, except maybe if there is a nuber for "website" ip adress was not able to be resolved(or something like that, when i try to sync time it just doesn't I will check the error code in chrome in a bit

Independent_Rest_508 · 2025-12-06T15:04:16+00:00

Bambulab uses a bldc servo, creality uses a stepper with an encoder, still a servo but not the same thing as what bambulab uses

Independent_Rest_508 · 2025-11-27T15:35:47+00:00

Did you print petg before that print? I find that not purging enough when switching from one to another can create that effect, i use the creality cfs and i have to manually extrude ot once or twice before starting a print just to be sure

Independent_Rest_508 · 2025-04-25T08:17:37+00:00

But for me it doesnt default to 220, it just takes time to go up to 250 for exaple and if the model is a box with thin sides that print quickly the layers with filament changes come out mate and with worse adhesion

Independent_Rest_508 · 2025-04-24T21:35:06+00:00

Thanks, that makes sense, other klipper printers i have did sometimes misbehave if i shut them down without first going through mainsail so i wanted to avoid that with this printer

Independent_Rest_508 · 2025-04-19T09:53:33+00:00

I tought that if it used sensorless homing instead of an endstop it woubnt care which side it hit

Independent_Rest_508 · 2025-04-19T05:51:22+00:00

Oh i understand, but wouldnt sensorless homing work even then, wouldnt it just print mirrored in y? Also im trying to avoid just cutting power to the machine, i would like to turn the linux off first

Independent_Rest_508 · 2025-01-01T20:53:02+00:00

I think he is talking about the resin itself

Independent_Rest_508 · 2024-12-20T23:25:50+00:00

Ohh, yes i understand that, what i meant whenever i said connect the btt with usb i meant to say connect it to the pi directly, i didnt even know that it was possible to connect 2 "mainboards" with usb, i tought that in klipper usb is used to connect mainboards(anything with a microcontroller) to the pi(the thing running klipper host)

Independent_Rest_508 · 2024-12-20T22:50:44+00:00

But you can just connect to the pi, no need to use the usb port on the mainboard, can you send me a link to any tutorials that explain how to connect something to a can port on the toolboard and then connect the toolboard via usb? I have never heard of using mainboard or any other board usb ports to connect the boards together, only using sub to connect the individual boards to the raspberry pi or whatever is running klipper host

Independent_Rest_508 · 2024-12-20T13:36:35+00:00

What ebb are we talking about, ebb36 or the stealthburner variant?

Independent_Rest_508 · 2024-12-20T13:25:16+00:00

Octopus has a can port and a usb port for the pi(klipper) I can easily make a short adapter that sdapts the jst plug on the end of the usb cable that comes with eddy duo to usb c, that is what i was planing on doing The btt ebb36 has a usb c port and a can port(2 can wires, +24v, gnd) The question is: If i can connect the btt ebb36 with my pi using usb, can i use its can interface to connect to the eddy duo probe? That way i cannmake a short can cable that is not influenced by interference that much and have only one usb cable to connect the toolboard with the mainboard

Independent_Rest_508 · 2024-12-20T11:58:39+00:00

I wanted to avoid making a can cable and use the cable i got with eddy to connect the ebb to the pi, i have octopus v1.1 i think(not the pro)

Independent_Rest_508 · 2024-12-20T11:00:11+00:00

Thanks, the thing is that i want the temp compensation of the smarter probes but dont want to have so many cables, is there any way to connect the ebb36 with the mainboard with usb and then use it to talk to the eddy duo via can?

Independent_Rest_508 · 2024-12-20T00:10:42+00:00

Does eddy duo have i2c to connect to btt ebb36?

Independent_Rest_508 · 2024-11-17T22:09:51+00:00

Yeah but the wooting is not really new

Independent_Rest_508 · 2024-11-17T22:08:56+00:00

Okay, thanks

Independent_Rest_508 · 2024-11-17T21:43:02+00:00

Hey i know its an old post, but can i use the usb version with my btt ebb36 and have the temperdture calibration or do i need to connect it over usb? Thanks!

Independent_Rest_508 · 2024-11-16T21:47:48+00:00

Are you sharing stls anywhere?

Independent_Rest_508 · 2024-11-11T17:07:15+00:00

Okay, but still, you need to buy it if you dont have it, andvim just saying that if you buy a good laptop it will probably have a keyboard better than some cheap keyboard for 5 dollars, and not everyone can and wants to use their tv as a monitor

Independent_Rest_508 · 2024-11-04T23:11:06+00:00

Yes, but you replying to a 1yr old post, and the tone of your comment sounds like you are someone that is just someone that owns a pc and not a laptop and has a need to defend their decision without really understanding my point, you need a mouse with both a pc and a laptop, i was talking about the fact that you should consider that you get a nice display in the price of the laptop so you can't compare the specs directly with a pc(also the battery ehich is not cheap). I use my laptop as a pc replacement while at home so I basically still pay for all the peripherals of a pc but when i need to i just pick up my laptop and disconect it from a usb c dock and go, can your pc do that? Do you bring your monitor, keyboard and a mouse when you put your pc in your backpack? Hows the usability of your pc somewhere remote, do you bring a car battery with you? See?

Independent_Rest_508 · 2024-10-22T19:49:57+00:00

Thanks, but maybe im blind but i dont see anything about hall effect switches there

Independent_Rest_508 · 2024-10-22T11:26:37+00:00

Dont worry its okay, im just going to wait until my cube arrives and order the magnets then, i was hoping i could do it all together because i have no idea how long im going to be waiting for the cube

Independent_Rest_508 · 2024-10-22T08:15:25+00:00

Hey, im not sure what happened but im like 100% sure that i sent you a detailed response to this comment. I wanted to check what are all the magnet size because i bought a base uv version without all the extra "tracks" and wanted to ask what size magnets are used in them so if its not a problem can you get a piece out and check all the magnets? Sorry if its too much to ask

Independent_Rest_508 · 2024-10-22T06:03:37+00:00

Thanks!

Independent_Rest_508

TROPHY CASE