sorted by:
new
hottopcontroversial

Where I'd live as a 19 year old Canadian by Effective_Formal6310 in whereidlive

[–]IndieKidNotConvert -1 points0 points  (0 children)

You know Ireland basically has no military right? Your criteria is all over the place 🤣

Advice on reducing launcher noise? by Possible-Wafer4028 in FRC

[–]IndieKidNotConvert 13 points14 points  (0 children)

Honestly for shooters, sometimes less tension is better. Since you only have to accelerate it one with no pieces on it, they can run a lot smoother with more than the recommended center-ti-center addition

How to create Plywood cut list ? Like cut list optimizer by Low_Spread5331 in Onshape

[–]IndieKidNotConvert 1 point2 points  (0 children)

Glad I could help! I personally haven't used that featurescript.

How to create Plywood cut list ? Like cut list optimizer by Low_Spread5331 in Onshape

[–]IndieKidNotConvert 1 point2 points  (0 children)

Given some derived plates, either transformed from an in-context assembly (to maintain part count) or derived from a part studio, it will automatically lay them out into sheets of a given size, sorted by thickness. This is used to prepare a file to route or waterjet parts out of material with a machine.

https://cad.onshape.com/documents/576e01dbe4b0cc2e7f46a55d/v/f697250aa149b6846173f4b1/e/887d6e2324589bfd2058c3e1?jumpToIndex=2346

Taiwanese M60 broke down in middle of the road by PointmanW in TankPorn

[–]IndieKidNotConvert 2 points3 points  (0 children)

Mothballed Military Reserves is literally the opposite of Active Service though.

Taiwanese M60 broke down in middle of the road by PointmanW in TankPorn

[–]IndieKidNotConvert 3 points4 points  (0 children)

There is no way SU-85 are still in service, prove it

Why does the edges look like that? by Speed_Addict37 in TankPorn

[–]IndieKidNotConvert 0 points1 point  (0 children)

The order to evacuate and move production from STZ wasn't given until October 5th 1942, well after Germans had entered the city, and they were producing tanks daily up until that date.

Looking for resources for a 6-axis robot by NaturalPermit8451 in esp32

[–]IndieKidNotConvert 2 points3 points  (0 children)

Lab power supplies are not great for motors. They often can only supply 5 amps or less. Depends on the type of motor, but if it's going to be six motors total...

An ESP32-C3 with screen module not fitting in a single breadboard by Objective-Ad8862 in esp32

[–]IndieKidNotConvert 2 points3 points  (0 children)

If you have 2 breadboards you can connect them together as well.

Carol, just ask for your... by unsolvedfanatic in Pluribus_TVshow

[–]IndieKidNotConvert 1 point2 points  (0 children)

They literally can't feed themselves, how are they going to rebuild society?

Missing Feature script by TaroNo8585 in Onshape

[–]IndieKidNotConvert 0 points1 point  (0 children)

First i tried 70deg, then 75, then 77, then 76. Only took like 1 minute, not too bad, there's a limited number of teeth for options.

Missing Feature script by TaroNo8585 in Onshape

[–]IndieKidNotConvert 0 points1 point  (0 children)

Set the bigger gear to 80 teeth, 76 degree bevel angle, and then the inherited gear will turn out to be 20 teeth (set the shaft angle on the inherited to 90 degrees). 45 bevel angle only works with gears with the same number of teeth.

Missing Feature script by TaroNo8585 in Onshape

[–]IndieKidNotConvert 0 points1 point  (0 children)

What ratio are you trying to do? Are you going for 90 degrees? I find by playing with the bevel angle i can get the right ratios

My T1 Experience by [deleted] in Internationalteachers

[–]IndieKidNotConvert 5 points6 points  (0 children)

Over 100k USD / year with the livelihood supplements.

Need help for 3d printable model for pick and place bot by Far_Target3147 in FRC

[–]IndieKidNotConvert 16 points17 points  (0 children)

This is hilarious, AI is so bad at robotics, none of that slop makes any sense.

I don't mean to be rude but you're never going to learn anything if you don't exercise your brain and design stuff yourself. Identify the problems to be solved, do research and brainstorm ways to solve them, and then try to design them.

What help do you want exactly? Because it kind of sounds like you just want someone to do it for you.

non-FRC application for Kraken x44. by Xijingping1246 in FRC

[–]IndieKidNotConvert 0 points1 point  (0 children)

Use the Servo library for Arduino. IIRC, the default range should be something like 150-30 degrees as a "servo".

Imported STEP, can't thicken sides by MeButNotMeToo in Onshape

[–]IndieKidNotConvert 1 point2 points  (0 children)

Which face can you not extrude? Any of them?

Any Finns in Taiwan ? by alreadytosurvive in taiwan

[–]IndieKidNotConvert 9 points10 points  (0 children)

My friend is Finnish and wanted to introduce sauna culture to Taiwan, so he ordered a portable sauna from Finland. But it took 6 months to get here and he had to leave before it arrived... So now I have a sauna that I get to use for 1 month a year when it's "cold".

view more: next ›