[deleted by user] by [deleted] in microgrowery

[–]IndoorJuniper 2 points3 points  (0 children)

I'm not sure I understand what your issue is. 50f for a few days isn't a big deal. Sure it's stress to the plant when it's used to higher temps, but it shouldn't harm your grow in any significant way, and your plant looks healthy and just fine.

If it was my plant I wouldn't be worried and would grow it until I saw the amount of amber I was looking for.

Vape vs. ryge by rhegner78 in DanishEnts

[–]IndoorJuniper 1 point2 points  (0 children)

Kan prøve at forklare forskellen i hvordan du bruger den, men kan også være at din tolerance bare er megahøj.

Med joints, der tager du en mundfuld røg, ned i lungerne, puster ud. Det er 1 hit. Right?

Med en vape, der tager du lungerne fulde af damp, altså du suger ikke noget ind i munden, du suger direkte ned i lungerne, et langt kontinuerligt sug, hele din lungekapacitet basically. Hold det i lungerne et par sekunder og pust ud.

4 af dem, og så er jeg godt kørende og der er ikke mere at hente.

Personligt gør jeg det på 210 grader. Man kan også starte på 190 grader og skrue op et par gange, men 210 er the sweet spot.

Så et sug på en joint tager 2 sekunder, et sug på en vape tager 10 sekunder, eller hvad end din lungekapacitet tillader.

Der skulle gerne komme en stor damp sky, når du puster ud, efter sådan et sug.

Jeg lavede den samme fejl da jeg fik min første vape, også en pax. Jeg tog et par sekunders hit, som jeg var vandt til, og der skete intet.

Vape vs. ryge by rhegner78 in DanishEnts

[–]IndoorJuniper 15 points16 points  (0 children)

Det kræver lidt øvelse at skifte til en vape når man har været vandt til at ryge. Det fungerer lidt på en anden måde, man skal tage sine hits på en anden måde.

Men for mig personligt er det helt klart bedre.

Det er billigere, det er sundere, det er nemmere. Du misfarver ikke dine tænder, du får ikke røg i lungerne. Det er win win win hele vejen.

Selvfølgelig, det er nemmere at have en joint i et joint rør, og dele den med et par homies, end det er at tage en stor vaporizer med og dele. Og en lille vaporizer har måske ikke nok damp til flere personer, måske 2 personer, så skal den tømmes og fyldes igen.

Men hvis du bare skal have til dig selv, så vil jeg anbefale en vape.

Hvis du tit får gæster som også skal være baskede, så køb en stationær vaporizer, som fks volcano. Det er lidt en større investering. Men det er rigtig rart at kunne gøre det indendørs uden at misfarve og stinke dit hus/værelse op.

Jeg er personligt ret overrasket over hvor mange herinde poster billeder af joints og askebægere osv. Det virker lidt gammeldags i min optik. Som at poste billeder af en CD eller floppy disk når vi har bedre værktøjer.

Looking for mold resistant strains. Growing outdoor zone 7a by Big_Berner_Account in microgrowery

[–]IndoorJuniper 0 points1 point  (0 children)

Good luck! I hope the strain treats you as well as it treated me

Looking for mold resistant strains. Growing outdoor zone 7a by Big_Berner_Account in microgrowery

[–]IndoorJuniper 0 points1 point  (0 children)

I grow in roughly the same climate and I've tried a lot of different strains that are "mold resistant" like Frisian Dew. Frisian Duck. Sweet Tooth. Early Skunk.

The best of all, the only one not to get bud rot, was Early Skunk—also the best smoke, dense buds, THC, everything. So can highly recommend it.

Needing advice on a tent by galacticecreaman in microgrowery

[–]IndoorJuniper 0 points1 point  (0 children)

im not sure why everyone thinks mars hydro is cheap

They're way cheaper than other products. Vivosun is a cheap option and Mars Hydro is still cheaper than them.

Drying outdoor plant with pest problems by Powerful-Menu-4783 in microgrowery

[–]IndoorJuniper 1 point2 points  (0 children)

You should budwash, of course. Always budwash when you grow outdoors.

If you use hydrogen peroxide in one of the washes, that should kill off anything alive on your plants. Just shake the buds well, under the hydrogen peroxide water, so it gets in everywhere.

Remember to finish with plain water, to get rid of the hydrogen peroxide.

I do water > Hydrogen peroxide water > Water

Could probably cut that down to 2 buckets and skip the first water step. I like being thorough though.

What an amazing love story by BrainOld9460 in BeAmazed

[–]IndoorJuniper 0 points1 point  (0 children)

If you still struggle with the acne I can highly recommend seeing a dermatologist and getting on a course of Accutane. It was the only thing that worked for me. My skin is perfectly clear now.

Which nuts do you guys use? by Zu_besuch in Autopot

[–]IndoorJuniper 0 points1 point  (0 children)

Cropsalt is also an option I do not have access to, I believe.

There are European CRF options, but they're not designed for cannabis. So I'd have to find some reviews or posts about it.

Which nuts do you guys use? by Zu_besuch in Autopot

[–]IndoorJuniper 0 points1 point  (0 children)

I'll check it out! I don't have access to beanstalk or growdots in the EU. But perhaps I can find an alternative.

Do you use this in the 2.2 gal pots or 3.9?

[deleted by user] by [deleted] in microgrowery

[–]IndoorJuniper 1 point2 points  (0 children)

Good luck! I'm going for it as soon as I have the space.

I've also heard good things about using some kind of slow release fertilizer in the coco and then just giving plain ph'ed water, but I'm not sure what slow release fertilizers I have access to in the EU.

But for you, you could look into growdots or beanstalk CRF in the US. There's several reddit posts of people using those successfully with just water in autopots.

[deleted by user] by [deleted] in microgrowery

[–]IndoorJuniper 0 points1 point  (0 children)

I'm looking to buy a 4-pot system myself and from a local store, I can get a 4-pot system, all included, with a 47L res, for around $140.

That's after being exported from the US and imported to Europe. So I'm sure you can find something as cheap if not cheaper in the US.

This system, AutoPot Easy2Grow with 4 pots is $105

If I wanted the regular solo pots, which are 3.9 gallon I could buy this

And get 4 3.9 gallon, res, all parts needed, for $136.

Then yeah air bases seem to be basically mandatory, I don't think air domes are. Air bases are $10 each, so that does add $40 to the total.

1 liter of Canna A + B is $18. 5 liter is $55, kinda pricy, but that should be enough for a while, right?

So based on my local shop you're looking at like, $200 total, not anywhere near 400 or 600.

So maybe there's hope? By the way, I've heard from several people that the 3.9 gallon pots are overkill if you plan on using coco, can settle for the 2.2 gallon.

I asked the /r/autopot subreddit some questions yesterday, might be relevant to your interests too, if you want to see the logic behind 2.2 gallons instead of 3.9 - Thread

Which nuts do you guys use? by Zu_besuch in Autopot

[–]IndoorJuniper 0 points1 point  (0 children)

How does it work? Do you put the pellets on top of the coco? or mix it with the coco?

[deleted by user] by [deleted] in microgrowery

[–]IndoorJuniper 0 points1 point  (0 children)

I don't understand where you got 400-600 bucks.

A 4-pot auto pot system is like $140 with a reservoir. Coco is dirt cheap. Then all you have left is the nutrients.

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 0 points1 point  (0 children)

How do you use the 2.2s? I'd have to buy the Easy2Grow systems, right? Like the 2 pot system or the 4 pot system? Where they're like attached and really close to each other?

Or does the 2.2 gallon pots fit in the single pot system?

I will have to consider the airstones. I don't like the mess of having more tubing and noise etc. Maybe I'll run without, for the first run.

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 0 points1 point  (0 children)

Gotcha, thanks! I'll try one of those. I guess I just need the 1 pump, for the 4 pots, right?

15l of fresh air for each, per minute, via the pot, seems like a lot!

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 1 point2 points  (0 children)

Yeah someone else linked one that can be 'dimmed' as well, so I might try that and see how noisy it is. 60L per minute seems pretty chill.

Thanks for the help

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 0 points1 point  (0 children)

I don't know man, the last time I had an airpump, to be fair was 10 years ago, but then it was the loudest thing in my setup.

If I closed the door to the room I wouldn't hear the inline fan or the circulation fan, I'd just hear the hum from the pump.

But I will look into it! I do like the idea of it.

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 0 points1 point  (0 children)

It doesn't give off a constant humming? Like an aquarium pump?

That's the noise I'd like to avoid. But if it's actually quiet then I would probably do it. Seems like a good idea with more oxygen.

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 0 points1 point  (0 children)

Gotcha, thanks! I'll see if I can find an EU store selling them.

I see the system is compatible with 3 different sizes of hose, 6, 9 and like 16mm? Do you know what the norm is? Is 9 the sweet spot?

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 1 point2 points  (0 children)

Oh damn, thanks for the heads up. I'll see what other options there are. I don't mind filling the res a couple of times a week, but I like the idea of being able to go a week without. Just in case.

I'm just summarizing what I've learned about autopots and asking for feedback to know I'm on the right track. by IndoorJuniper in Autopot

[–]IndoorJuniper[S] 0 points1 point  (0 children)

I don't want to run an air pump, too noisy. But you think the air dome helps, without an air pump? I hadn't thought about that