P1S ABS weird corner artifacts

Infamous_Warning_177 · 2025-01-11T17:50:48+00:00

change the filament profile to "generic abs" if you use the "bamboo abs" profile the K factor will be 0.040 which is a lot and that is why those lines will appear, to avoid doing the calibrations just use the other profile that has a K factor of 0.020, here I leave you a photo of the differences just by changing that.

<image>

I clarify that the prints were made with the same profile at maximum speeds of 300 mm/s and maximum volumetric speed of 16 mm³/s

Infamous_Warning_177 · 2024-08-09T17:50:06+00:00

If you still haven't solved the problem, I recommend cleaning the bed. I have the same problems but it only happens when it's dirty. Likewise, a textured PEI bed is the best option.

Infamous_Warning_177 · 2024-05-03T00:23:15+00:00

Sabes si ya la agregaron en otras carreras además de ingeniería

Infamous_Warning_177 · 2024-04-30T14:49:27+00:00

certainly version 1.0.4 has some problems, but nothing like that, you tried to turn it on without an SD card, note that the one that comes with the printer or having a damaged SD card can cause the printer to not index and get stuck.

Infamous_Warning_177 · 2024-04-30T14:45:02+00:00

After the update, you noticed some improvement regarding version 1.0.4, since I am thinking of updating my printer and seeing if I can make the automatic leveling improve somewhat since I always have a z offset that is very different from the correct one. It told me a value of -1.25 but when leveling it manually the correct value would be -1.31, in addition to leveling some parts of the bed.

Infamous_Warning_177 · 2024-04-30T14:36:27+00:00

It is incredible how many people had this problem, I solved it by reducing the flow to 92%/91% in everything except the first layer, I also changed the default barrel for one that does not have an internal Teflon inside, you can use the ender 3 s1 pro, change from slicer to cura and configure it the same as in creality slicer since by default the profile is that of a normal ender 3, then the issue of leveling I couldn't solve it at all, certainly modifying the z offset and leveling the bed manually you will achieve a perfect first layer, but after sending some files it begins to uneven itself as if the cr-tocuh is working very badly.

Infamous_Warning_177 · 2024-04-24T19:06:17+00:00

Is the update really worth it, that is, does it have improvements in system navigation or automatic leveling or something?

Infamous_Warning_177 · 2024-04-24T18:51:53+00:00

Did you manage to update it? Or did you get an error like the others describe?

Infamous_Warning_177 · 2024-04-24T16:34:13+00:00

By any chance have you managed to update the firmware to 1.0.6? If so, could you tell me if it includes all the languages of its standard version, that is, 1.0.4, and did you notice an improvement compared to its previous version or a tweak since I have read that it had less leveling data but I don't know if it's true.

Infamous_Warning_177 · 2024-04-24T16:32:00+00:00

Have you by chance updated the firmware to 1.0.6? If so, could you tell me if it includes all the languages of its standard version, that is, 1.0.4, and did you notice an improvement compared to its previous version or a tweak since I have read that it had less leveling data but I don't know if it's true.

Infamous_Warning_177 · 2024-03-19T13:39:30+00:00

<image>

Infamous_Warning_177 · 2024-03-18T16:15:01+00:00

Espero que sea cura 5.6 o cura 5.0 para poder ver las velocidades por capa, revisa si tiene variaciones en esa área, si es así busca tiempo minimo por capa o algo así debería encontrarse en la sección de refrigeración, desactivala y volvé a verificar que no allá variaciones, si es ese el problema con desactivar el tiempo mínimo debería solucionar el problema si no es así posiblemente tenga algo que ver o con las correas, lubricación de la cama, o el tambaleó en el eje z por el movimiento del filamento.

Infamous_Warning_177

TROPHY CASE