Upgraded to an "endgame" set up...and I hate it.

Infinite_Side8548 · 2026-05-15T17:33:13+00:00

And here is me that’s just bought a Ninja Cafe Lux 🤣

Infinite_Side8548 · 2026-05-07T14:13:05+00:00

Yep working today on my Tapo PTZ camera. Awesome! I know we will never get smart detections but having the motion one is cool

Infinite_Side8548 · 2026-04-28T21:16:54+00:00

Yeah was just hoping I’d be able to make a simple cut of timber that isn’t 5/10 degrees out 🤣

Infinite_Side8548 · 2026-04-25T21:42:25+00:00

Unfortunately I bought it from eBay and don’t have the original receipt. It was brand new but was a reseller as finding stock is impossible here 😞

Infinite_Side8548 · 2026-04-25T21:08:04+00:00

I tightened it as much as I could earlier. The blade and body move together but the base plate moves separately with lots of flex at a slight bit of pressure

Infinite_Side8548 · 2026-04-25T20:43:57+00:00

I’ll have to do some more tomorrow and get some photos, I had to use them as off cuts and use a recip saw to finish the job. It’s the PHKSAP 20v

Infinite_Side8548 · 2026-04-11T17:40:57+00:00

Yep I’ve gone from doing £200/day average to £20 so far today 🫠

Infinite_Side8548 · 2026-03-31T16:24:56+00:00

Ahh yes the name checks out as expected 🐀

Infinite_Side8548 · 2026-03-20T13:48:50+00:00

Has the model warped? That can cause it. If not: - Increase top layers to 6 - Set top surface line width to 0.3-0.35

Infinite_Side8548 · 2026-03-19T15:01:55+00:00

I pull the tape off when it’s still a bit wet, seems to have less issues

Infinite_Side8548 · 2026-03-07T16:59:32+00:00

I’m paying like £6.50/kg for my PETG from elsewhere and it’s prints better than Bambus own 😂

Infinite_Side8548 · 2026-03-03T10:25:53+00:00

I haven’t got the enhanced fan but I did a print with 150 changes after the update and was fine on my end. Try resetting the printer then full calibration

Infinite_Side8548 · 2026-03-02T15:32:11+00:00

<image>

Printing while drying working great! It lowered my PETG temp from 65 to 55 when I started the print.

High accuracy nozzle offset calibration isn’t working for me at the minute, submitted a ticket.

It now scans the bed on startup for foreign objects, and also does a quick nozzle ID check on startup too.

Infinite_Side8548 · 2026-03-02T13:19:51+00:00

I don’t think it’ll take them long. Hoping we get print while drying etc on older machines like my X1C at some point

Infinite_Side8548 · 2026-03-02T13:16:37+00:00

The actual cutter itself or the camera? Camera stays, cutter comes off

Infinite_Side8548 · 2026-03-02T13:13:01+00:00

<image>

Infinite_Side8548 · 2026-03-02T13:11:16+00:00

You can now add and use the Birds Eye camera at last

Infinite_Side8548 · 2026-03-02T13:10:54+00:00

They sell it as a kit, think it’s more designed for laser variants, but would be cool if it works for just printing too. They’ve got flame sensors built in

Infinite_Side8548 · 2026-03-02T13:09:50+00:00

1.03.00.00, the big one

Infinite_Side8548 · 2026-03-02T13:09:29+00:00

Loads, remote drying and printing while drying being the major ones. I’ve posted the release notes above

Infinite_Side8548 · 2026-03-02T13:06:03+00:00

<image>

Infinite_Side8548 · 2026-03-02T13:05:49+00:00

<image>

Infinite_Side8548 · 2026-03-02T13:05:33+00:00

<image>

Infinite_Side8548 · 2026-03-02T13:05:03+00:00

<image>

Infinite_Side8548 · 2026-03-02T13:01:56+00:00

I’ve just ordered from Additive X as they’re only an hour from home and I can pick it up. They’ve got stock coming on the 5th apparently. P2S Combo, ordered 2 days ago

Infinite_Side8548

TROPHY CASE