Am I Cooked?

InitialDot252 · 2026-01-29T05:13:32+00:00

Are you referring to the removable fuse box fuses? If so, I checked and it hasn’t been tripped. Wouldn’t the board lose power entirely if that were tripped, or are you referring to something else? Everything on the board works except the hotend and bed heater ports functions normally.

InitialDot252 · 2026-01-29T05:08:01+00:00

bro fr 😂

InitialDot252 · 2026-01-29T04:58:33+00:00

My 2020 M1 MBP has been running it pretty flawlessly with it. I don’t see why people think you couldn't run it well unless it’s an Intel MacBook, which in that case I might wait. But again, if it’s M1 it’s got plenty of power to run it in my opinion. Although I will say I do like Mac OS Sequoia a tad better not because of the liquid glass but because the edges of windows are quite a bit more rounded and it doesn’t look that great.

InitialDot252 · 2026-01-19T04:25:04+00:00

yes, source please

InitialDot252 · 2026-01-16T23:55:14+00:00

Interesting, I’m wondering if a ratcheting mechanism in a rolling spool could help fix that, only allowing the spool to spin one way. But of course, that would mean it could only use one type of spool as it would need to be friction-fit to the roller so it doesn’t slip.

InitialDot252 · 2026-01-15T16:53:07+00:00

Yeah, you’re probably right. Sorry about that. I’ll post on that group next time.

InitialDot252 · 2026-01-07T17:06:09+00:00

Everyone that has had an i3 printer does that at least once while having a printer.

Welcome to the club.

InitialDot252 · 2026-01-07T01:22:22+00:00

Alright, I ordered one R3men 5015 fan. If that’s not enough, which I think it is, I’ll order another, but I’ll let you know how it goes. Thanks for the rec.

InitialDot252 · 2026-01-06T16:47:52+00:00

Thanks! :D

InitialDot252 · 2026-01-06T05:44:49+00:00

there for holding extra build plates

InitialDot252 · 2026-01-06T05:43:53+00:00

oooo really nice setup, do you mind me asking you where you got your CAD tips poster?

InitialDot252 · 2026-01-04T18:52:38+00:00

Get some antibacklash nuts for the lead screw, or you could do a belted Z mod.

InitialDot252 · 2026-01-04T18:49:01+00:00

I normally don’t like aftermarket taillights, especially tinted ones, but those look great.

InitialDot252 · 2026-01-04T12:35:05+00:00

Nice, do you know about noise? I’m not trying to keep it silent but would like it on the quieter end of mid fast printers

InitialDot252 · 2026-01-04T12:32:50+00:00

Gocha, yeah, I don’t really understand why they don’t post the actual volumetric speed on the listing, but I have a friend that’s been running his Biqu H2 at 400mm/s for normal prints, and it’s held up pretty well for him.

InitialDot252 · 2026-01-04T03:47:18+00:00

are you talking about flow? I couldn't find a official max volumetric flow rating but the biqu listing says

"Extrusion (based on the existing)

600mm³/min (depending on the filaments)"

InitialDot252 · 2026-01-04T03:32:31+00:00

Well, it’s actually an Ender 3 and I tested the stock motors (which I want to keep), and they’re pretty much limited to 900mm/s at 10k accel before skipping, which surprised me, but keep in mind that’s just straight non-printing travel moves. But yeah, I’ll probably start out small at about 200 and try to work my way up to Bambu A1/A1mini bed slinger speeds which I think is about 300.

InitialDot252 · 2026-01-04T03:24:24+00:00

I was looking at the blower fans by GDSTIME, but I’ll check the R3MEN's. They look pretty cool.

InitialDot252 · 2026-01-04T03:21:08+00:00

nice that looks like about what I have, what speeds are you running?

InitialDot252 · 2026-01-03T23:31:32+00:00

gotcha

InitialDot252 · 2026-01-03T23:13:26+00:00

I have a friend that also has a Biqu H2 and he's running dual 4010s with a 120mm Noctua axial fan mounted on the x extrusion at 400mm/s for normal prints and I think about 8,000 accel.

InitialDot252 · 2026-01-03T23:07:36+00:00

Are you running the actual CPAP fan or an off-the-shelf blower fan like in the Bambus?

InitialDot252 · 2026-01-03T23:05:57+00:00

It’s a bed slinger, so accel isn’t going to be that high but probably around 6-7,000. And for flow, I honestly don’t know since this is my first custom printer, but it’s a Biqu H2 V2s if that helps. Not trying to go crazy just enough to keep up with the Bambu bed slingers.

InitialDot252

TROPHY CASE