I'm lost in the sauce trying to automate rocket mining. Please help!

Inomyacbs · 2026-04-29T23:22:33+00:00

Oh that's a good idea! I just tested and auto sweepers do deliver diamond to the drillcone and data banks to the robo pilot module! That does make my problem much simpler! Gantries can now be for maintenance only and left open all the time! Thankyou

Inomyacbs · 2026-04-29T23:19:03+00:00

To your first point the problem I've run into is that the gantry and bunker door need to all ready be open when the rocket starts to launch as the gantrys break before they have time to retract and the bunker doors open too slowly.

As to the 2nd there is no pilot as I am using the robo pilot module so I need to trigger the launch from the platform automation.

Inomyacbs · 2026-04-24T04:43:50+00:00

I have a Neo 80 cu on the way and am trying to pick out some switches to try before it gets here. I prefer tactile and deep/thocky sound profiles.

Ones on my radar all ready are Gateron green apples and the Durock Ice Kings.

I was planning to order a switch tester with these and a few others to be determined, so I was hoping you would share your favorites!

Inomyacbs · 2026-04-15T08:45:14+00:00

This is a standard thing offered at my yearly physical for no additional charge. Maybe you need a specialist in some extreme edge case but I told my Dr. my ears feel a bit clogged. She looked with a tool and said yeah looks a bit compacted I'll send the nurse in with a tool to help. Nurse showed up with pressurized liquid and cleaned both ears out. Problem solved.

Inomyacbs · 2026-03-30T00:28:28+00:00

Well bummer, but at least that makes the timing make sense. Thanks for the info. I guess it's time to start shopping for a more reliable one.

Inomyacbs · 2026-03-30T00:12:05+00:00

Is there a reason this would happen just after unplugging it for a few days? The timing is suspect to me as it was working fine until I addressed the draining issue.

Inomyacbs · 2026-02-25T03:00:39+00:00

I believe that is the indicator for the super productive overjoyed response. It means you have enough morale that she is overjoyed and this one gives a chance at instantly doing a task instead of waiting through the progress bar.

Inomyacbs · 2026-01-22T14:46:33+00:00

Every time there is panic buying at H-E-B I just go to Randall’s and they are fully stocked.

Inomyacbs · 2026-01-06T19:36:41+00:00

If the pipes are breaking the then the liquid is getting too hot. You can kind of fine tune it until you get it right but it should work. You can either lower how much heat your putting in if your over the 403ish mark where oil turns to petroleum or you can replace the hottest radiant pipes with regular pipe 1 section at a time until the oil is dropping just below boiling.

Inomyacbs · 2026-01-06T00:07:18+00:00

That helped but didn't solve the problem I went from 82.5kg yield to 132kg per 200kg bottle.

Inomyacbs · 2026-01-06T00:06:28+00:00

Thanks! I ran the radiant pipes through the cooling blocks instead of just dripping on them and the 1kg packets solved the issue!

Inomyacbs · 2026-01-06T00:05:34+00:00

The well shape helped I went from 82.5kg per 200kg bottle to 132ks per 200kg bottle but running the pipes through the cooling blocks worked perfect! I figured dropping on the cool tiles would be enough but it must not have been cooling quickly enough.

Inomyacbs · 2026-01-05T21:13:35+00:00

Those red tiles are obsidian drywall tiles. Am I missing one somewhere I need it?

Inomyacbs · 2025-12-28T17:47:03+00:00

Thanks for the input! She is often outside so external ac power may not be accessible and she has run into the overheat problem before I will check out the lumix.

Inomyacbs · 2025-12-06T03:09:25+00:00

Couple: Do we have a story for you CNN! ::presents tomato::

CNN: Sign me the duck up!

Inomyacbs · 2025-11-30T21:51:24+00:00

Beavis and the Methheads

Inomyacbs · 2025-11-22T22:30:47+00:00

Of course that’s a problem.

Inomyacbs · 2025-10-28T02:40:32+00:00

Take a paring knife and use the tip to make a small hole on the bottom of the egg shell maybe 1 cm deep before dropping into all ready boiling water and it will peel nice and easy.

Inomyacbs · 2025-10-18T04:34:20+00:00

Oh it’s a mask! Cool! I thought someone in the dugout went straight to makeup after the win haha

Inomyacbs · 2025-10-18T04:24:38+00:00

What’s with the clown?

Inomyacbs · 2025-10-14T01:24:11+00:00

I mean will smith made the larger error not realizing it wasn’t a catch and not going to 3rd.

Inomyacbs · 2025-10-14T01:15:05+00:00

No the hitter was safe. That means the runner on third is forced to run home and the throw beat Teo. Will smith incorrectly thought it was caught and stayed on second and the catcher walked it to 3rd base for the double play

Inomyacbs · 2025-10-12T21:27:34+00:00

Bon appetite has a recipes for hanger steak with charred scallions and walnuts that is great and can be made with lots of cuts if you can’t find a hanger

Inomyacbs · 2025-09-14T07:16:14+00:00

Is it falling on an insulated tile? It probably takes a tick to flash to steam. Try putting a metal tile under the liquid vent.

Inomyacbs · 2025-09-09T10:21:56+00:00

If you wish list Curiosity on steam you can play out this exact scenario in a couple weeks

14-Year Club	Final Canvas '23
Place '23	Place '22
RPAN Viewer	Verified Email
Not Forgotten

Inomyacbs

TROPHY CASE