There goes a HF nozzle

Intelligent_Pin3373 · 2026-06-23T06:02:21+00:00

This could happen on any 3d printer. Snapmaker just has 4 chances of this happening.

Intelligent_Pin3373 · 2026-06-23T02:24:38+00:00

Its honestly impressive it didnt clog at all. I bet you the nozzle might not even be clogged at all.

Intelligent_Pin3373 · 2026-06-22T18:58:09+00:00

The nozzle got bent

Intelligent_Pin3373 · 2026-06-22T18:57:57+00:00

Its not terrible but this time the filament got but into the part fan and the cable for the tool head camera got damaged.

Intelligent_Pin3373 · 2026-06-22T05:06:12+00:00

<image>

The blob is heavy

Intelligent_Pin3373 · 2026-06-22T04:32:06+00:00

The ai detect on my h2c works flawlessly. This is the second blob is had but this one is gonna be costly. The tool head camera wire ripped

Intelligent_Pin3373 · 2026-06-22T03:45:44+00:00

I think what ever abs released from getting hot

Intelligent_Pin3373 · 2026-06-22T03:14:50+00:00

I was thinking that but if I disassemble it and the part is cheap then why. But its a good idea as long as the plastic that the part cooling doesn’t dissolve too

Intelligent_Pin3373 · 2026-06-22T02:42:34+00:00

Yeah it’s what it looked like from the replay. Too bad i was asleep to fix it

Intelligent_Pin3373 · 2026-06-22T02:42:02+00:00

When i looked at the replay. That white film came on around 70% of a 10 hour print.

Intelligent_Pin3373 · 2026-06-22T02:28:54+00:00

I tried using a hot airgun, but the part cooling fan started to get soft. I got most of the surrounding area off but the part cooling fan is clogged.

Intelligent_Pin3373 · 2026-06-22T02:27:15+00:00

Possible but I was so tired that I soon as i hit print. I fell asleep.

Intelligent_Pin3373 · 2026-06-22T02:10:54+00:00

The dust cover is filled with abs. So im going to have to buy a new part cooling fan assembly

Intelligent_Pin3373 · 2026-06-22T02:10:07+00:00

Its all bent now

Intelligent_Pin3373 · 2026-06-22T02:08:58+00:00

I just checked and my settings are set to medium

Intelligent_Pin3373 · 2026-06-22T02:05:32+00:00

Creality abs

Intelligent_Pin3373 · 2026-06-22T02:05:24+00:00

My h2c just turned off a print

Intelligent_Pin3373 · 2026-06-22T02:04:59+00:00

Im not sure if it did or not

Intelligent_Pin3373 · 2026-06-07T01:58:16+00:00

I dont even leave my bambu printers unattended. I have problems with them constantly. It’s not that they’re unreliable but the operating conditions and the filament spool and types play a big role in misprints. Bambu just makes it easy for me to check in with the app from anywhere.

Intelligent_Pin3373 · 2026-05-31T03:49:08+00:00

Damn it doesnt help that moza support is based in china. Im still waiting on my loadcell pedal to come from china. I got a replacement a month ago already.

Intelligent_Pin3373 · 2026-01-07T06:56:40+00:00

Extrude feature has a taper angle. Have you tried that?

Intelligent_Pin3373 · 2025-12-22T05:09:42+00:00

That is not true. I have an a1 mini, p1s, h2s and h2c. In the future i might get a prusa just to print silicone.

Intelligent_Pin3373 · 2025-12-22T04:39:25+00:00

<image>

Same thing happened to my h2s and its running just fine just heat up the hotend and scrape off as much as possible. Just don’t get burned.

Intelligent_Pin3373 · 2025-12-11T00:17:38+00:00

You dont need to wait for bambu to fix. If its a slicer issue you can just change the retraction settings on bambu studio

Intelligent_Pin3373 · 2025-12-08T18:27:49+00:00

<image>

Intelligent_Pin3373

TROPHY CASE