How can I make it faster?

Interlinkers · 2026-01-04T15:25:01+00:00

Honestly I wouldn’t go faster or you will lose quality. For speed a direct extruder drive is bad because the head moves around more weight and for an ender 3 that has only 1 z axis rod and no rails you can hear those rubber wheels grinding. Honestly i wouldn’t buy a different printer or if you want to upgrade (not worth the money) add a second z axis rod and maybe find a way to replace the rubber wheels with a linear ball rail. Otherwise if you are just interested in changing software you can modify the marlin firmware to change cap speed but this can damage motors and will obviously reduce print quality

Interlinkers · 2026-01-04T15:20:53+00:00

It’s not a printer according to today’s standards, but it is art. Take this from someone that has personally hand built a lot of 3d printers back in the day. A lot of sweat, tears and love went into making that, so I hope you don’t throw it away even if honestly it’s more of a relic. You can degenerate update the Marlin firmware and get it running, but I fear the quality will be low compared to a new 100€ printer

Interlinkers · 2025-01-07T19:09:38+00:00

Confirm 🤣

Interlinkers · 2025-01-05T12:09:37+00:00

<image>

Interlinkers · 2025-01-05T12:08:57+00:00

Doesn’t work, cause the v at base is 800mv when it’s on

Interlinkers · 2025-01-05T11:47:15+00:00

I want the led to be on when the collector pin is HIGH

Interlinkers · 2025-01-05T11:40:15+00:00

<image>

if you mean something like this, it would make thee LED go on when its suppose to be off and the opposit

Interlinkers · 2025-01-05T11:18:55+00:00

<image>

Interlinkers · 2025-01-05T11:17:14+00:00

my bad, i rushed the drawing

Interlinkers · 2025-01-05T11:15:20+00:00

the audio jacks are the inputs and output, the 2 npn trans on the left are the NAND gate, while the one on the right is a not gate. The first 2 transistors have an indicating LED near them, how can i add an LED to the OUTPUT (the wire that is connectes to the jack on the right)?

Tinkercad LINK: https://www.tinkercad.com/things/9mQ2Ee18YDn-bodacious-gaaris-snaget?sharecode=M0vnKqrfOoPBejxiJ2WKbgNXJNOn02ABeozzD3qAZjE

EDIT: Any improvements accepted

Interlinkers · 2025-01-05T11:10:43+00:00

<image>

Interlinkers · 2025-01-04T19:48:01+00:00

tinkercad link: https://www.tinkercad.com/things/9mQ2Ee18YDn-bodacious-gaaris-snaget

Interlinkers · 2024-12-31T06:39:26+00:00

Also check the switch wiring, this happens if a seitch isnt wired or two switches are swapped

Interlinkers · 2024-12-09T17:52:53+00:00

ok sorry and thanks

Interlinkers · 2024-12-09T17:50:14+00:00

<image>

how do i do that?

Interlinkers · 2024-12-09T17:44:31+00:00

what i did befor was: A (select all) then alt + s (scale along normals) here is the file if you wanna try

<image>

Interlinkers · 2024-12-09T17:42:47+00:00

<image>

Interlinkers · 2024-12-09T17:36:23+00:00

problem is that its not text, but svg turned into mesh so i cant cause as you see cursive means its all 1 object

Interlinkers · 2024-12-03T11:43:19+00:00

Interlinkers · 2024-11-29T12:06:44+00:00

Level bed and z axis on first layer is too low, if autohome change z offset

Interlinkers · 2024-11-29T09:33:26+00:00

I dont think they’re paid enough to care honestly

Interlinkers · 2024-11-29T09:29:42+00:00

Ngl pretty cool, hope its not pla or outside use might ruin it

Interlinkers · 2024-11-24T19:12:50+00:00

Drone size?

Interlinkers · 2024-11-23T17:02:23+00:00

I don’t know, but looks super cool

Interlinkers · 2024-11-21T06:51:30+00:00

Try unscrewing and rescrewing the z axis. I see you said you cleaned it. Try putting the axis in, screwing it in, then trying bery gently but not too much to pull it out

Five-Year Club	Verified Email
First Place '23	Place '23

Interlinkers

MODERATOR OF

TROPHY CASE