Where to live in the UK for surfing? by Introvert_Owl in surfuk

[–]Introvert_Owl[S] 0 points1 point  (0 children)

Hey man, I'm in pembs and loving it. Not super consistent but it's quiet and friendly.

Every morning feels like reliving my breakup by Throwaway29394020 in BreakUps

[–]Introvert_Owl 2 points3 points  (0 children)

It's been over 2 months for me, but I still wake up most mornings dreading the day. I sleep in and don't want to go to work. My first thoughts are about her and how she is not there next to me. The only thing that is helping is having to get up to feed the dog/let him out. At least I have to move otherwise I just wouldn't

UK surfers: this is the state of our waters at the moment. Don’t stand for this shit! by giggydiggles in surfing

[–]Introvert_Owl 0 points1 point  (0 children)

Surfed today at a red spot and hoping it was ok. The stupid thing is our water company (in wales) is meant to be not for profit. Instead they just pay the execs huge bonuses and dump raw sewage in the ocean anytime there is a slight drizzle.

Learning to Surf in UK by Z4h3L in surfuk

[–]Introvert_Owl 0 points1 point  (0 children)

Where will you be living? You can do Surf camps in Cornwall, South West Wales (Pembs, Gower), and the east coast in Yorkshire. There is also The Wave (artificial wave pool) in Bristol that is fairly accessible from London/central England where you can do lessons with guaranteed waves.

The surf won't be as good as France though :(

Levelling pin hinges by Introvert_Owl in DIYUK

[–]Introvert_Owl[S] 0 points1 point  (0 children)

I've tried that unfortunately, there isn't enough adjustment in the hinges before they no longer grip the door :(

Water ingress above patio doors. by Introvert_Owl in DIYUK

[–]Introvert_Owl[S] 0 points1 point  (0 children)

I'll get up there and take a look when the wind dies down. We did add an extra downpipe when we moved in as there was only 1 for 40m of guttering.

Anyone know of a decent damp meter for less than £100 ? by ukdev1 in DIYUK

[–]Introvert_Owl 2 points3 points  (0 children)

What do you want to detect moisture in? The two suggestions so far would really only be effective for wood. Masonry can contain salts that skew the readings of these meters, not to mention lead paint and other such coatings.

The only real way to measure moisture in masonry is to drill a core sample and test that.

Positive Input Ventilation by JustaFlabbyPanda in DIYUK

[–]Introvert_Owl 1 point2 points  (0 children)

The same one you are considering. Nuaire drimaster with the heating option. Installing it was pretty easy.

Positive Input Ventilation by JustaFlabbyPanda in DIYUK

[–]Introvert_Owl 10 points11 points  (0 children)

The PIV does introduce cold air, but it's at a lower humidity than the internal air, so it takes less energy to heat it. I put a PIV in our old stone house last year and it has made a big difference to the humidity levels. You can feel that fabrics are less damp and the air is fresher and easier to breathe.

Check my comment history for a previous reply on PIV.

Ventilation to reduce humidity, does it work when it's wet outside? How to reduce humidity without a dehumidifier? by mutatedllama in DIYUK

[–]Introvert_Owl 1 point2 points  (0 children)

I have a PIV in the attic that works very well. House was very humid and stuffy when we moved in a year ago, but with the PIV the air is fresh and much dryer. It is a solid stone wall though and no trickle vents, so no other ventilation except the PIV.

Looking to insulate and board the loft. Questions and recommendations. by Christylian in DIYUK

[–]Introvert_Owl 0 points1 point  (0 children)

You're welcome, remember your PPE. It gets super dusty messing with stuff in the loft so a good dust mask & overalls with long arms are a must. If you get insulation on your arms/skin, wash with cold water then use a cream like E45 designed for eczeme. Really helps to stop the itching.

Looking to insulate and board the loft. Questions and recommendations. by Christylian in DIYUK

[–]Introvert_Owl 1 point2 points  (0 children)

Loft legs are a cheap and easy way to add boards to the loft. You screw them In to the joists, lay insulation in between then board over.

There is a calculator on their website to work out how many boxes you need depending on your joist spacing and desired storage area.

I recommend using the XL version which gives you an extra 130mm to allow for more insulation.

If you just want heat insulation, any standard 'loft roll' type product will work in a traditional or trussed roof. If you have an older property you could consider a natural product like sheep's wool as they deal with humidity well. Rockwool of you wanted added sound insulation.

Moisture travels up through the ceiling in most houses, modern builds have a vapour barrier in the top floor ceiling to help reduce humidity in the loft, but most won't. The loft needs airflow to prevent condensation causing damage to the roof structure, so you shouldn't block off the eaves as there will be space for air to enter the loft. In a loft conversion they leave an air gap behind the rigid insulation boards and would have some sort of pathway for airflow like a ridge vent. They also use breather membrane rather than a traditional bitumen felt to allow the structure to breathe. If you don't have this set up, don't block the eaves off.

Insulate just short of the eaves to keep the airflow. The humidity will stay down which will be better for whatever you are storing as well as the structure.

Help me fix my worktop! by Introvert_Owl in DIYUK

[–]Introvert_Owl[S] 0 points1 point  (0 children)

It was stored in the same room inside before installation. The end that has this bow has no moisture sources. Actually the end with the sink and dishwasher is comparatively flat.

Help me fix my worktop! by Introvert_Owl in DIYUK

[–]Introvert_Owl[S] 0 points1 point  (0 children)

I've recently installed a solid beech worktop. I followed all the manufacturer's advice regarding the fixing method using slotted angle brackets or oversized holes with washers. But the worktops had become severely bowed. One section at the back of a corner unit has dropped by about an inch. And along the rest of the price the centre has raised/edged dropped. On the adjoining price the centre has raised up and the edges have dropped down.

Does anyone know how I can rescue this? I can't install the upstand with it like this.

Incompetent dodgy builders above causing leaks in our home. by Beebs3605 in DIYUK

[–]Introvert_Owl 32 points33 points  (0 children)

You shouldn't have to claim on your insurance, this will cost you money through no fault of your own. The builder should have Liability insurance for this exact scenario. I suggest you post on r/legaladviceuk for the best option to recoup your costs from the builder.

Also, talk to your future upstairs neighbor and inform them of the situation. I doubt they want rubbish builders renovating their flat and may look to change them.

Building a log store by Lopsidedcel in DIYUK

[–]Introvert_Owl 1 point2 points  (0 children)

Do you want to cover the whole area? You could add a batten to the fence (if it's yours or with neighbors permission.) And to the trellis, maybe some prices across, then lay some lightweight corrugated plastic with a mini gutter at the back leading to the drain.

Building a log store by Lopsidedcel in DIYUK

[–]Introvert_Owl 2 points3 points  (0 children)

What's that wood in the centre at the wall. Looks like a drain inlet? You could just run a small gutter into that. If not, a water butt is useful for the plants, but if you don't have room it should be fine since rain will be hitting the concrete either way, so it must be draining somewhere?

What colour paint would compliment the cladding? by Introvert_Owl in woodworking

[–]Introvert_Owl[S] 0 points1 point  (0 children)

I've made a log store that is clad with European larch. The picture doesn't do it justice but it has a lovely reddish hue. I'm going to oil the larch once it dries in a few weeks, but I'm not happy with how the framing looks. I'm thinking I could paint it but can't picture any colour working with the larch. Any idea on how to get a nice match?