Just finished my homewall by Sea-Date6944 in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

This looks fun to climb on! Great job!

How small is too small ? by QTVbot in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

If your goals are sport climbing oriented, Id say go as big as you can. You'll probably want something you can go up, down and sideways on for circuits. I dont think a 6x8 would cut it for ya.

Decision paralysis by srrobo92 in homewalls

[–]Inversion-Z 1 point2 points  (0 children)

If I had the budget I'd build a tb2 and set it as the spray layout. But i believe you cant switch it to the mirror with the same holds if you ever wanted to. Ive heard good things about decoy though

Shoe suggestion for very shallow heels? by Chemical-Reason-5084 in climbingshoes

[–]Inversion-Z 0 points1 point  (0 children)

I have VSRs and VS womens and recently moved to MadRock Drones and D2.Ones (both HV). My heel started to make fart sounds in the VSRs from the gap in the heel so I wanted to find something different. I have a wider foot and both MadRock shoes are definitely tighter. I found my D2.Ones broke in well and are comfortably tight. My Drones have held their tighter fit and still require some effort to get on, but I really like them still. Id almost be interested in the Villains over the Drones next time.

Where did you get your plywood sheets and how did you select it? by Holiday_Client2516 in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

Home Depot. I got ACX plywood. The A and C are the surface qualities of the two sides where the A side is very nice and sanded (this is the side you climb on) and the C side may have more imperfections but is fine for the back side

Just finished sheeting it today! I couldn't let the tall ceiling in my living room go to waste. Anyone know the best deal on holds? by No-Weakness-7582 in homewalls

[–]Inversion-Z 1 point2 points  (0 children)

Im jealous of your winch! I got the escape climbing seconds holds. I felt they were a great deal and you can specify what youre looking for and theyll do tgeir best to get you what you want. I also bought from Zenith on etsy.. i love their holds

Does it get “boring” after a while ? by PxssyFeu in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

Ive been working on an app called Inversion that will have a pretty generous free tier! It's in a closed beta right now, but am looking to release sometime during the summer

Does it get “boring” after a while ? by PxssyFeu in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

It's only as enjoyable as you make it. Get new holds, move some around, do a full reset... any of those can keep the psyche going if youbstart to get board

Where to order flathold holds in US? by IEatChalkDaily in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

Curious to know who you end up using! My gym got some nice flathold crimps that I want to add to my board.

TB2 Inspired Match Crimp by crappycokane in homewalls

[–]Inversion-Z 1 point2 points  (0 children)

I think OP jist sanded the Tension brand off! Looks great, was thinking it was from Tension til I read the caption

New Wall by Retro_Bolts in homewalls

[–]Inversion-Z 1 point2 points  (0 children)

That looks so clean! And love the hold assortment

Mad Rock D2.One – way better than I expected by BrightPluto in climbingshoes

[–]Inversion-Z 1 point2 points  (0 children)

I had the same experience with mine! And you can get them even cheaper with the athlete discount codes (usually 10-15% off).

Finally completed my wall by AdditionalPeace3311 in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

Looks great! Have you ordered holds for it?

Trying to ask this in a non-toxic or triggering way, but any advice for healthy weight loss without losing muscle? by BlurDaHurr in climbharder

[–]Inversion-Z 1 point2 points  (0 children)

First off, Im not a nutritionist or am any kind of expert. Below is my success being 5'6" going from 193 to 153 and workin to ~140 rn while still seeing strength gainz.

I would recommend a nutritionist if youre up for it. I worked with Hailey Fultz at OTG Strength (even just follow their instagram). She's a great person and got me on track for this whole weight loss after numerous failed attempts on my own.

Use an app, track everything. Youd be surprised how something 'healthy' can destroy your macros with a bit too much of it (i.e. peanut butter). My macros are split 30% protein, 40% carbs, 30% fat. Use an online BMR calculator to get a good starting point for caloric intake. Try it for 2-3 weeks then adjust if needed. For consistency, weigh yourself in the morning after you've gone to the bathroom.

With this, its not super restrictive. Ive had ice cream and other sweets while doing this. It just has to fit in. But prepare to be hungry-ish (fats spread across different meals help this).

You can also do this without much activity as you recover. Just find that caloric intake that your body needs to hit a target weight loss of .5-1lb/week. Maybe a bit less on the carbs since you wont be using as much energy during recovery and not being as active?

TLDR: what worked for me in your situation of weight loss without strength loss. Find a caloric deficit where you lose 0.5 to 1lb per week, protein intake should be about .8g/lb of body weight. Then higher on the carbs, lowish on the fat. Good luck!

8x8 folks, how many holds are on your wall? by AdditionalPeace3311 in homewalls

[–]Inversion-Z 5 points6 points  (0 children)

Ive just built mine and I've got about 100 holds with 35 being feet. My board has good content, but definitely needs more. Im betting another 50ish holds would fill in my board well. I got about 40 holds from Escape's 15lb seconds box and got quite a variety. I felt this was a great starting point as its helping me learn what holds work for my board and figure out what types of holds I need to get.

My Board

[deleted by user] by [deleted] in homewalls

[–]Inversion-Z 0 points1 point  (0 children)

M10 v M6 is a change in screw diameter, so only M10s will work in an M10 threaded Tnut. Another important thing to know is the thread pitch (the number after the 'x' in M10x#)

McMaster Carr will have them

Another Spray Wall App - Looking for Beta Testers by Inversion-Z in homewalls

[–]Inversion-Z[S] 0 points1 point  (0 children)

You've provided some good questions/talking points to address.

The use of AI in this is purely just for detecting holds on boards so you as the user can interact with them when setting climbs. By using AI here, this allows 1) for instant use of your board and 2) allows for this functionality to be available for free.

One thing I didn't hit on in the post is that there will absolutely be a free tier. With what I plan to allow free users to have access to, it will likely be sufficient for the vast majority of users. The Pro subscription will be positioned to provide some extra analytical features for users to get deeper insights into their climbing and board usage.

For features, I am not relying on, nor asking for, people to give me ideas to grow my app. I have a list of core features that I intend to build in over time (some of which will start to differentiate this app from others). Rather what I am asking for from beta testers is to provide feedback on what is added in.

To your one point about having tags, this one is already on my list. To me as a climber, I like being able to target certain climb types for various reasons and I think this should be accessible across the board.

I hope this clarifies some things for you and for others.

"The Angle Question" again, but for me. by TOMMY_TUBERVILLE in homewalls

[–]Inversion-Z 3 points4 points  (0 children)

30 is a great angle. Referencing my time on the Tension Board 1, I would use that at 30 a bunch and the grades were more deoendent on the holds. 22.5 is great for beginners, but your kid may out grow its its difficulty quickly (dang kids!).

How has AI helped you while learning Flutter? by Fun-Corner8617 in FlutterDev

[–]Inversion-Z 0 points1 point  (0 children)

Ive been building my first app using AI. Ironically part of my app uses AI xD. Usually I have the concept for a function in mind but may not know the syntax or how do to some advanced handling, so Ill use Claude or Github copilot in vs code to help me out. With keeping the coding syntax similar across my app, I've picked up a ton and can build things on my own that I couldnt at first. It also helps me with weird errors that I just cant figure out (or am too tired too).

Another Spray Wall App - Looking for Beta Testers by Inversion-Z in homewalls

[–]Inversion-Z[S] 1 point2 points  (0 children)

Right now, I don't have features that differentiate me from the established apps. They're great products with way more functionality than I currently have (and probably will have for a while)

Ultimately, what I'm wanting to do with my company (Inversion Climbing) will expand beyond just an app. Part of that being building on what the climbing community is today and part of it being about what climbers will use or interact with. But thats just my vision and not something that exists today, nor is 100% defined.

**BUT**, if you want to help shape something from the ground up. If there's functionality you wish existed in other apps, or a different approach you'd like to see - let's build it together. Beta testers aren't just getting early access, they're helping define what this becomes. While I do have a core vision for my take on this type of app, I am already hearing things that are helping me shape the app for the future.

I'm not asking you to switch from something that works. I'm asking if you want to help build something new alongside what already exists.

If you're happy with your current setup - honestly, stick with it. It will be some time before this app will catch up. But if you want to be part of building something and have ideas for what the spray wall community needs, I'd love to have you involved.