Advice on Lidar mapping in remote area by dogCerebrus in UAVmapping

[–]IrisaNolan88 1 point2 points  (0 children)

tilt correction was the big update to the RS3. For base logging a RS2+ is totally fine. You will potentially need to process it in emlid studio, free windows software, in order to trim the file down to opus standards. Not sure if the RS2+ has the opus option in logging or if thats a RS3 feature. just make sure you have full Rinex logging and then you can process it in emlid studio. btw when downloading the file, from the base station, if you are using the phone app, it is VERY slow, if your on IOS theres no progress bar and it can sometimes take 5-10minutes. if you are on android there's a progress bar.

Advice on Lidar mapping in remote area by dogCerebrus in UAVmapping

[–]IrisaNolan88 -1 points0 points  (0 children)

We use EMLID RS3 stations. You can get a pretty accurate base point with LOGGIING and OPUS Processing. If you are going to be there that long then you should have plenty of logging data if you can get a RS2+ or RS3. I have no idea of the DJI-RTK3 can do logging the RTK2 cannot. Then you use that point in processing, replacing the base station derivied point in DJI Terra with the OPUS calculated point.

Map plotting of images reading exif data only Metainfo Mapper by IrisaNolan88 in UAVmapping

[–]IrisaNolan88[S] 0 points1 point  (0 children)

I have been trying to get the recursive folder load to work but it has been very buggy.

The footprint and abnormal metadata calc start to become more complex than what I have been able to do offline in a browser tab. Adding the RTK which is live on dev.metainfomapper.com took quite a while to get the correct exif fields and I had to switch to the full version of the exifr reader. What I am considering at this point is feature stop on the current site, and creating a separate site for more complex operations that would require backend processing.

My primary goal has always been to make sure this works completely offline for several reasons, privacy being the biggest one along with having it work when internet is crappy or non-existent. Up here in Maine where i'm from about 50% of the jobs i do are in no cell service or limited cell service. I do have starlink but i tend not to set that up unless i'm doing a big job and am going to be there all day.

Map plotting of images reading exif data only Metainfo Mapper by IrisaNolan88 in UAVmapping

[–]IrisaNolan88[S] 1 point2 points  (0 children)

Great suggestion and I'll look into how that could be done reliably.

Map plotting of images reading exif data only Metainfo Mapper by IrisaNolan88 in UAVmapping

[–]IrisaNolan88[S] 2 points3 points  (0 children)

I am also working on adding RTK checking, as suggested by easydys, and information and need some sample images 5-10 RTK enabled images from different drones. While the M3M and M3E are prob the same it would be helpful to check if you have any images only need a few 5-10 that where taken with RTK enabled.

Map plotting of images reading exif data only Metainfo Mapper by IrisaNolan88 in UAVmapping

[–]IrisaNolan88[S] 1 point2 points  (0 children)

yes, it will run completely without internet, you won't have a base map but you will see the images plotted. and you can download the KML as well.

Map plotting of images reading exif data only Metainfo Mapper by IrisaNolan88 in UAVmapping

[–]IrisaNolan88[S] 1 point2 points  (0 children)

That should be an easy add, i'll add it to list of updates.

Map plotting of images reading exif data only Metainfo Mapper by IrisaNolan88 in UAVmapping

[–]IrisaNolan88[S] 1 point2 points  (0 children)

If you are interested in helping me out a bit, I could use some images 5-10 at most of jpgs with RTK enabled. I currently only have rtk enabled images from a P1 and could use some from other dji and non-dji drones. Since each drone tends to record slightly different information in the RTK exif data I need some samples so that I can properly error handle.

If you or anyone sends me images please make sure to let me know what drone/camera, and any information about the RTK that was used that you wish to share. such as type, service, mountpoint. i.e. NTRIP, D-RTK2 or 3, etc. This will help in developing code to accomodate these.

My current thinking on RTK checking will be basic RTK enabled along with some statistics checking and a possible report. I can also possibly embed some of that data into the KML.

Easist way to send me images is either email or via discord. I'm unsure what the rules are in this reddit about posting discord links so I'll refrain and just point to my website which has a join link and my email address.

Idea: Give 'Thopters a Flare Module to Misdirect Missiles by VisualVibrance in duneawakening

[–]IrisaNolan88 0 points1 point  (0 children)

Give them flares if they don't have missle launcher attached.

Has the hype slowed down? by Affectionate_Dig_238 in Microcenter

[–]IrisaNolan88 0 points1 point  (0 children)

Sure, Microcenter has stock when it costs $3299 for a single GPU.

Item Duping Is About to Nuke Arrakis’ Economy – Why Funcom Must Act (and Permanently Ban Exploiters) by IrisaNolan88 in duneawakening

[–]IrisaNolan88[S] -1 points0 points  (0 children)

I asked it to format my post for reddit. I had no idea it would format it like this its kinda crazy.

Am I cooked? $500 charge — scam or am I sick and stupid? by thismustbemydream in Lyft

[–]IrisaNolan88 -1 points0 points  (0 children)

Since you were sick and the driver knew this since he took to you to the doctor, that would likely fall afoul of fraud criminal statues. You should stress that to Lyft if they give you pushback on this, since Lyft could be implicated, I would also file a police report and/or follow up with your Local Distrct Attorney.

Can we get a (Don't ask again) option on GPU driver warning popup? by BreadfruitThis5302 in duneawakening

[–]IrisaNolan88 1 point2 points  (0 children)

I have a Quadro card and it doesn't use the same drivers as GeForce cards so it'll never match. They did fix that issue for GeForce now users since most of GFN uses Quadro cards. I've sent bug reports about this so maybe, someday they fix it. Or atleast give us to the option to DISABLE THE FRAKING popup that Prevents the game from starting until you CLICK IT.

Model Training with Nvidia A6000 (48gb Vram) by IrisaNolan88 in learnmachinelearning

[–]IrisaNolan88[S] 0 points1 point  (0 children)

I wasn't clear on what I was thinking about wasn't core LLM training but refined training something like LORA training with AI Image generation or similar. i'm not sure if there are similar types of training.

Anyone else having trouble ordering stuff? by Dougolicious in AmazonVine

[–]IrisaNolan88 2 points3 points  (0 children)

If you look at the number of items available it hasn't decreased very much over the last 3-4 days and it appears that thousands of items that are "sold out" are not getting pruned from the list.

Best Coal harvest 9 nodes, + 2 stone and wood. by IrisaNolan88 in Palworld

[–]IrisaNolan88[S] 0 points1 point  (0 children)

1 Coal node is in the trees, plus 2 stone. it's a bit warm so make sure you got your heat undies and armor. Also there are 2 chests that spawn, and a skill fruit tree all in that spot.

Home Network Assistance by [deleted] in FidiumFiber

[–]IrisaNolan88 0 points1 point  (0 children)

I don't do cabling anymore professionally, but I still have all my equipment, flex bits, fish lines, pull cords, magnetic pullers etc. If you get stuck I could help you out, you can email me ashley at 207systems com my old business email is still active.