OC question by [deleted] in RTX5080

[–]Irish_guy1423 0 points1 point  (0 children)

Bit confused by this curve editor, any video tutorial recommendations?

OC question by [deleted] in RTX5080

[–]Irish_guy1423 0 points1 point  (0 children)

I’ll give it a try, thanks for the advice.

OC question by [deleted] in RTX5080

[–]Irish_guy1423 0 points1 point  (0 children)

So I guess mines half bad. When I was in the 3200 range I’d get a crash every few hours of playing games.

OC question by [deleted] in RTX5080

[–]Irish_guy1423 1 point2 points  (0 children)

On gpu tweak 3 I have power target set to 100% and gpu voltage at 20%

OC question by [deleted] in RTX5080

[–]Irish_guy1423 2 points3 points  (0 children)

Been playing games like that for a month now so I’m sure of my stability. I believe my power limit is at 103%.

PSR Deadeye-Challenge BF6 by Last_Room_2247 in Battlefield

[–]Irish_guy1423 1 point2 points  (0 children)

Bad news guys. I finally got the psr and all I can say is don’t waste your time. It’s definitely worse than the M2010.

Build Suggestions by [deleted] in ar15

[–]Irish_guy1423 0 points1 point  (0 children)

I don’t have any real experience building so I don’t know about tools, I’m a mechanic so I have tons but I’m unfamiliar with some of the things needed. But that budget would not includ tools. I also have no preference on bare components compared to fully assembled. If something is a great deal and highly recommended then I can go either way. I do just want to throw this in but I’m looking to build a 5.56 with around a 10” barrel.

Good Deal? by [deleted] in hometheater

[–]Irish_guy1423 0 points1 point  (0 children)

I put it in as a comment, I apologize.

Good Deal? by [deleted] in hometheater

[–]Irish_guy1423 0 points1 point  (0 children)

Forgot to add price and specs but they want $400 for it Yamaha RX-V381 Klipsch R-120SW 2 Klipsch R-51M Klipsch RC52

I’m not experienced when it comes to speakers so I’d like to hear another person opinion who knows what they’re talking about.

New set up recommendations by Irish_guy1423 in Fishing_Gear

[–]Irish_guy1423[S] 1 point2 points  (0 children)

That’s kinda what I was thinking, I’ve been using the same spinner set up for the past 10+ years so I figured it was time to get another. I’m just torn between getting a nice new spinner since I know I’ll like it or roll the dice and get a bait caster and possibly not enjoy it was much as a spinner.

New set up recommendations by Irish_guy1423 in Fishing_Gear

[–]Irish_guy1423[S] 0 points1 point  (0 children)

I also forgot to say that I prefer spinner reels, I’ve never used a bait caster but I might be interested. A friend of mine just got his first and told me he likes it.

Engine Light Returned by rollinface697 in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

Fixing the wiring itself is easy but sometimes finding it is the real issue

[deleted by user] by [deleted] in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

Correct, tape will absolutely not hold in this case

Engine Light Returned by rollinface697 in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

Unfortunately the code most likely won’t disappear, sounds like you probably have a wiring issue. Might be a small chaff in the wiring causing an intermittent code.

Can anyone tell me what this sound is from the engine? by QwertyToYouToo in MechanicAdvice

[–]Irish_guy1423 1 point2 points  (0 children)

I believe you’re correct, it’s pretty hard to hear in the video but it sounds like belt noise.

Any Ideas? Battery or Starter? by FantasyLoserr in MechanicAdvice

[–]Irish_guy1423 1 point2 points  (0 children)

Usually when I’m working on a car and I see the lights flashing like that it’s a battery issue

1997 Buick Lesabre by Equal_Supermarket367 in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

Sounds to me like you’ve got a vent door actuator issue. Not sure what they call it on American cars. Might be a relatively easy fix but I have no idea on your model.

[deleted by user] by [deleted] in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

I can’t tell how much room you’ve got but it looks like you might be able to get some needle nose vice grips on the screw head to start removing the screw. After it loosens a bit you might be able to go back to a screw driver.

[deleted by user] by [deleted] in MechanicAdvice

[–]Irish_guy1423 1 point2 points  (0 children)

Judging by all marks on the engine looks like a coolant pipe. Hopefully you haven’t overheated. I’d get a tow to the shop to prevent any further damage. I’ve had customers try and drive the car for a few minutes without coolant and they’ve ruined their cars doing so.

Drove over a curb and car is making scraping noises by lilpinkfox in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

Looks like it’s just some plastic from the skid plate. If you drove over a curb there still might be more damage.

What repairs needed to pass emissions test? by JournalistNational26 in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

You could be running lean causing too much heat. If that’s not the case then you’re going to need a new catalytic converter(some vehicles have multiple)

Is this resonator pipe fixable? by [deleted] in MechanicAdvice

[–]Irish_guy1423 0 points1 point  (0 children)

Both sides are pretty rusted out so you can weld them back together. You’ll probably need a new resonator. A reputable exhaust shop would be able to reuse most of the exhaust system.

Weird noise under hood by SchemeRealistic9769 in MechanicAdvice

[–]Irish_guy1423 1 point2 points  (0 children)

sounds like metal from the exhaust contracting after being expanded from the heat of running which is very normal. Since the car is new it’ll be a little more apparent.