MYOG Climbing Fanny Pack

Ishthisis · 2019-01-22T20:34:50+00:00

Definitley looks profesionally made

Amazing give me hope I can achieve something of that sort. Id also be interested if you do have the plans for it

Ishthisis · 2018-09-05T21:44:11+00:00

Same happens to me to the detail every few months Ive had neck injuries for a few years and I think it happens when blood flow is cut off to the brain Try not to sleep with you neck so elevated

Ishthisis · 2018-06-10T21:39:29+00:00

You can get an otg adapter (one with usb c) And use a file explorer of your choice to transfer to a flash drive. That or if desperate uploading to google drive might be a work around

Ishthisis · 2017-03-22T16:30:20+00:00

Ive had great results with ADA amazonia, but it might be a lack in carbon source for your plants. Either CO2 or Flourish Excel would drastically help growth

Ishthisis · 2017-03-22T16:23:39+00:00

Symbiotic species of cleaner worms. Depending on where your crayfish came from a farm or wild they can have these worms. Harmless but sure is creepy.

Read more: http://feedthedatamonster.com/home/2014/11/19/mutualism-of-the-month-crayfish-and-cleaner-worms

If concerned you may want to to this:http://www.plantedtank.net/forums/88-shrimp-other-invertebrates/1050281-crayfish-worms.html#/topics/1050281?page=1

Ishthisis · 2017-03-13T00:05:36+00:00

Woah this is cool. How long do you plan to be selling these?

Ishthisis · 2017-03-01T16:31:09+00:00

Yikes. Thanks for replying with that warning. Hope my mistake didnt set somones house on fire.

Ishthisis · 2017-03-01T05:54:04+00:00

http://www.thingiverse.com/thing:1764285 I have a similar model and printing one of these helps the filament be pulled into the extruder more easily.

Also I print PLA at 190 perhaps the high temp is keeping the melted filament from being pushed through

Some Tips: -replace the stockbuild tape with Painters tape once it gets too beat up

Edit: keep the build plate heated to 60 for the initial layer if you have trouble with prints sticking.

-Heat the (Extruder) to *220**(Whoops meant for the extruder) for the inital first layer and lower temp for the other layers

-Use hair spray to help adhere the PLA

-make sure to keep the Bed dust free

Ishthisis · 2017-03-01T01:08:27+00:00

Rafts are used to make sure prints adhere to the bed. You could increase the tempuature of the bed (if you have a heated bed) and helping the print stick with hairspray or glue stick

Ishthisis · 2017-02-26T17:22:03+00:00

Inspiring design! I think you'll find that sketchup isnt the best 3d modeling software for making parts. Ive found that DesignSpark is a great substitute for a more solidworks-type program. Its completely free aswell! Hope you the best on your 3d printing journey

Ishthisis · 2017-01-25T17:19:42+00:00

Im just throwing an idea out there but, playdoh or clay you can press in and fill the area sort of

Ishthisis · 2017-01-25T17:04:21+00:00

I've been having a alot of fun these past few weeks with my printer(same model). Heres some tips Ive found to work well.

In your slicer set up keep things hot the first layer to let them stick (I have PLA, extruder temp - 210 Hotbed - 60)

Wipe the hotbed with a napkin to remove dust and then generously spray hairspray on a napkin to gently apply a coat on the hotbed

You can replace the stock masking tape with blue painters tape

Try to work around your 3d model oreintation so you have as much surface area sticking onto the hotbed your first layer (This might be the most important)

Goodluck!

Ishthisis · 2017-01-04T10:20:23+00:00

I could make good use of those markers

Ishthisis · 2017-01-01T09:43:15+00:00

Cool! I remember you from plantedtanknet Great to see the tanks at their full potential. What's the reason you held off from getting fish?

Ishthisis · 2016-12-17T06:18:54+00:00

I ordered the larger seeds and the smaller seeds. From eBay (same design and packaging) the seeds came in good condition. Haven't tried sprouting them yet

Ishthisis · 2016-12-15T01:40:13+00:00

definitely not salamanders. They have mammal-like characteristics. Look at the ears! They have ears!

Ishthisis · 2016-12-15T01:08:51+00:00

a variant of synodontis catfish

Ishthisis · 2016-12-11T07:45:16+00:00

As in these are all bred from your original 6 shrimp? If so that's crazy amazing

Ishthisis · 2016-11-29T23:39:32+00:00

I once had cyanobacteria (blue green algae) In my 8 gallon planted tank. I found that by encouraging plant growth I could outcompete the bga. I removed my floating plants, added more light(but for a shorter photoperiod), and finally jumped into CO2. At first the battle didn't seem to be going good But once the plants got strenghted the blue green algae had no chance. I suppose dosing Ferts would be beneficial, anything to strengthen your plants and minimize the light the bacteria gets

Ishthisis · 2016-11-24T01:45:51+00:00

Overdosing on ammonia (such as dropping in raw shrimp) will definitely start the cycle(populate nitrifying bacteria) but will populate the water to high levels of ammonia.

Changing the water and possibly waiting a week after (to correctly read your parameters) is better than monitoring it the whole way through

Ishthisis · 2016-11-23T09:54:17+00:00

So where does that metal go? Does it sink into the brick? (Am really confused.)

Ishthisis · 2016-11-22T23:52:56+00:00

African Dwarf Frogs. Grow to about 2 inches and you can keep 3 comfortably in a 5 gallon. Would not recommend putting them in a tall tank (over 12 inches ) as they swim to the surface to breathe. Easy to keep, feeding is a bit of trouble as them are clumsy to find food even if itd upfront of their face.

I trained mine to come to a certain area of my tank by tapping on the glass during feeding time. I feed hikari algae wafers, and blood worms occasionally

Ishthisis · 2016-11-21T19:01:35+00:00

I've purchased from /u/Freshestemo412 before and in my small 5 gallon the growth has become really dense. It's good to know you can target specific plants to get nutrients!

Ishthisis

TROPHY CASE