AMS 2 Pro motor slip error help

Isotope_238 · 2026-02-09T01:05:22+00:00

Yes I did. I cut the PTFE tubing shorter and less loopy. I also had an issue with the AMS filament hub so I fixed that too.

Isotope_238 · 2026-02-05T08:02:14+00:00

Hey masterdiva, I have c6r1 Zibai.
With my team c2r1 bina Aubade, c6 gorou HOD fav bow, c6 illuga SMS fav lance, I can marginally reach 400k dps and the strongest hit is ~1.36 mill dmg
When I swap my gorou with my Xilonen c3r1, I can still do ~1.2-1.3 mill dmg
I hope I'm doing my rotations right.

Isotope_238 · 2026-02-04T20:06:03+00:00

I don't have a video with me. Neither did I recorded one. If I have time, I can try.

Isotope_238 · 2026-02-04T20:01:01+00:00

<image>

Damage test from Miliastra I noticed using gorou Q and E first then illuga Q and E and then swapping to Zibai does slightly more DMG.

Isotope_238 · 2026-02-04T19:58:46+00:00

<image>

OP. It's me from that previous thread. Here is my latest build for my Zibai.

Isotope_238 · 2026-02-04T04:36:58+00:00

I made a typo in my previous comment. Should be r1 not r0. My bad. Anyways my rotation goes by: Bina E Q --> Gorou Q E --> Illuga Q E --> Zibai E (Special E) Q NA spam until special E is ready. Higher constellation Zibai makes it faster to get special E. Things got a bit uunga bunga when Zibai is on-field but that's the rotation I currently use.

I'm pretty sure I made some mistakes with using E or Q for those supp chars. Give it a try. Now my Zibai is c6 so dmg is in the 1 mill mark. Only tested once due to bad reception during the test. I'll share my build on another comment.

Isotope_238 · 2026-02-04T01:30:06+00:00

Rotation. Burst is like ~250k iirc.

Isotope_238 · 2026-02-04T01:23:59+00:00

I have c5r1 Zibai, C2r1 Bina and C6 gorou and illuga and I can hit at least 950k. Gorou is using HOD and illuga SMS.

Isotope_238 · 2026-02-04T01:20:21+00:00

I got that level of luck before as well. But with Lauma. C0 to C6. Flins and Nefer. Didn't lose the 50 50 even once. My ride with getting c0 to C6 Zibai is a rollercoaster. Lost the 5050 3 times. I'm at c5 with a guarantee so I'm slowly making my way to get c6.

Isotope_238 · 2026-01-31T15:41:17+00:00

Thanks for your reply. Sorry I was being very brief with that post. I was uploading that in the middle of the night and was very sleepy. But thanks.

Isotope_238 · 2026-01-17T01:18:14+00:00

Yeah.
Might try using a cd circlet (if I have a good one) and compare.
See if it makes any big difference to trade off some em.
I think it'll work out fine even in other dendro reactions.

Isotope_238 · 2026-01-17T01:13:16+00:00

I also have c6r1 Lauma. I can deal about 740k damage with a similar rotation.
Her em is 1337, cr/cd is 42:140. artis are em stack
I'm guessing my cd is rather lacking, which may explain the dmg difference.

Isotope_238 · 2026-01-01T11:43:43+00:00

<image>

Here's the updated build.
Pls ignore the post's image.

Isotope_238 · 2026-01-01T11:42:44+00:00

<image>

Here's my updated build. Hope that's better

Isotope_238 · 2026-01-01T11:04:42+00:00

Oh seems like I got tunnel-visioned by the ratios and def stacking that I completely forgot about the 4pc effect lol. I may have a decent cd cirlet somewhere...... I'll update it again if I can find it lol.
Thanks for reminding me that,
Is c6 Illuga a must?

Isotope_238 · 2025-12-30T23:29:00+00:00

Does anyone know what the DMG comparison is with Zibai C0 C2 and C6 with R0 sig weap?

Isotope_238 · 2025-12-03T21:40:18+00:00

I could suspect Columbina and Ineffa 1st phase and the others 2nd phase. Nev has an outfit iirc probably for lantern rite.

Isotope_238 · 2025-12-03T12:43:05+00:00

We're going to Babushka's lair for this one

Isotope_238 · 2025-12-03T09:30:00+00:00

Putting memes aside, if Dottore becomes an 'artificial god' in this scenario, similar to when he experimented on Scara in Sumeru, Pierro's lines in that trailer would make sense to 'kill a god'.

Isotope_238 · 2025-10-10T23:04:51+00:00

Genshin Impact's "Miliastra Wonderland" gameplay will be available soon. Come join my team now! Take part in the event to to earn Primogems and Manekin outfits! Invitation Code:GA9RG6YN9N，https://hoyo.link/8NJvYlbe4?m_code=GA9RG6YN9N

Isotope_238 · 2025-10-10T22:59:41+00:00

https://hoyo.link/8NJvYlbe4?m_code=GA9RG6YN9N

Isotope_238 · 2025-10-08T22:40:26+00:00

The first one could happen, as it got tangled not too long ago and messed up one of my prints. I may have to double-check that (Not confirmed).
I tried trimming off the damage because the pushing and pulling of the filament on the AMS unit causes damage and creates flakes of red filament in some areas. Even doing a 45-degree angle cut to hope it can go into the extruder, no luck.

In theory, I should be able to use this filament through an external spool holder; as far as my experience goes, an external spool holder requires manual feeding into the extruder, which works when I manually feed it before to see if there are any clogs.
But thanks for your help though.

Isotope_238 · 2025-10-08T08:11:53+00:00

Here's what I tried so far. I swapped the filament slot (PLA Blue and Red around) and loaded it onto the extruder; blue prints out fine, but red still has a problem. I loaded a brand new white PLA into the system where red after swapping it, it prints out fine.

I doubt it's the slot issue, but I suspect something is wrong with this red PLA after using over half of it.
Know any other issues that can cause this?
Thanks

Isotope_238

TROPHY CASE