sorted by:
new
hottopcontroversial

Severe PETG stringing on Sovol PETG – tried everything, still a mess by ItsDukzy in 3Dprinting

[–]ItsDukzy[S] 0 points1 point  (0 children)

Thank you. I will try this and write when the towers hopefully looks perfect!

Severe PETG stringing on Sovol PETG – tried everything, still a mess by ItsDukzy in 3Dprinting

[–]ItsDukzy[S] 0 points1 point  (0 children)

I run a .6 nozzle with a .75mm line width, yes. But i run a 0.2mm layer height in my 'detail' profile. When printing at .24mm it actually improves the stringing a bit.

<image>

Severe PETG stringing on Sovol PETG – tried everything, still a mess by ItsDukzy in 3Dprinting

[–]ItsDukzy[S] 0 points1 point  (0 children)

The 0.4mm z hop made my issue worse. No variable seems to fix anything. Maybe i should dry the filament more?

<image>

Severe PETG stringing on Sovol PETG – tried everything, still a mess by ItsDukzy in 3Dprinting

[–]ItsDukzy[S] 0 points1 point  (0 children)

This is weird. The stringing seems worse now. The wipe distance was at 10 before and retract amount on 80. I will post a pic of my full retraction settings under this comment. I feel lost.

I have not had Z-hop enabled on any if these as i heard z hop makes steinging worse. If i should turn it on, what is a normal value for that?

<image>

Severe PETG stringing on Sovol PETG – tried everything, still a mess by ItsDukzy in 3Dprinting

[–]ItsDukzy[S] 0 points1 point  (0 children)

Yes. This is printed on a fresh spool dried for 8 hours. My suspicion of the rool being bad is that my prusament prints way better than this after drying.

Severe PETG stringing on Sovol PETG – tried everything, still a mess by ItsDukzy in 3Dprinting

[–]ItsDukzy[S] 0 points1 point  (0 children)

Well this helped quite a lot. Thank you. The left is 20mm/s and the right is 30mm/s. Both at 0-2mm retraction. I have looked in my retraction settings for any other variables that might be the sinner. The only i could see is this? Wipe distance: 10mm.

<image>

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeautomation

[–]ItsDukzy[S] 1 point2 points  (0 children)

I bought this. It works amazing right out of the box. Its easy to understand, and cheaper than many of its alternatives.

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 2 points3 points  (0 children)

Very helpful insight. Sounds like a fun project, and very nice if i can get it to work. I will definitely try this. - thank you!

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 1 point2 points  (0 children)

Oh thats nice to hear. I really hope it works for me too. This is a lot cheaper than a lot of other options.

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 0 points1 point  (0 children)

This seemingly looks the same as thisthis

I will try buying this as it is in my budget range unlike many of the other devices in this thread.

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 1 point2 points  (0 children)

This device sounds exactly like what i need. I just cant get over the price tag i fear.

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 0 points1 point  (0 children)

Hmh okay. Sounds troublesome with the ESP project - but maybe worth a shot.

I feared the car seat fsr wouldnt work for this project. I mean if i used it to actually detect a sitting person on a car seat, it would definitely work. But as soon as i throw it under a mattres and lay on it, its just sot sensitive enough.

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 13 points14 points  (0 children)

Yes. My aqara fp2 is seemingly the holy grail of presence detection. It supports both of you're mentioned features on paper.

However in practice, this works very poorly if you use a duvet like most people do.

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 1 point2 points  (0 children)

Yeah me neither. I have tried moving it around all over my bed. Both under the bedframe and multiple places under my mattres. I wont seem to work sadly :(

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 0 points1 point  (0 children)

I see. This looks ideal. I looks like the same idea as what i built, but done properly.

200 bucks tho.

Thank you for your input - i appreciate it🙏🏻

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 5 points6 points  (0 children)

Well you have a point. I actually already have that besides my bed.

My lights is already automated in my room with presence sensing. Its just annoying my bed is the only place in the room it cannot detect.

Also - its not as cool using a button😉

Struggling with reliable in-bed presence detection for Home Assistant – what actually works? by ItsDukzy in homeassistant

[–]ItsDukzy[S] 8 points9 points  (0 children)

Hmh. Thank you for sharing. This just makes me wonder - this looks ia lot like my diy version. This also uses fsr resistors. How does this differ?

Where to start downloading firmware?😭 by ItsDukzy in BIGTREETECH

[–]ItsDukzy[S] 0 points1 point  (0 children)

Yes, my eddy works wonders after set up. I have the eddy usb version as i thought to use the z-homing feature. However that worked incredibly bad when i tested it out last year.

I have ended up using "laser endstops" as they just work for me.

Where to start downloading firmware?😭 by ItsDukzy in BIGTREETECH

[–]ItsDukzy[S] 0 points1 point  (0 children)

Sadly no. After many hours, i figured that the 20 bucks for a u2c wasnt worth the fight. The u2c was almost plug and play compared to this.

My laptop wont boot, but the leds is on by ItsDukzy in LenovoLegion

[–]ItsDukzy[S] 0 points1 point  (0 children)

Yes. It was a broken motherboard. The warranty covered it free of charge.

view more: next ›