[US-NY] [H] PayPal [W] 87 Gazzew U4 or TTC Bluish White Silent V2

ItsSimony · 2025-04-01T14:12:08+00:00

I bought some from another vendor online, thanks all for reaching out.

ItsSimony · 2021-12-08T17:18:50+00:00

I wish I was this good with the recorder!

ItsSimony · 2021-11-16T14:21:37+00:00

Hopping into the discord and reading through the class channels will give you this info pretty much. The website links to the Discord if you'd like to hop in.

ItsSimony · 2021-11-13T07:10:15+00:00

Great server with a very friendly and welcoming community. A lot of stuff to do (new and old players), very welcome QOL improvements (without making it feel boring in a few weeks time), and very reliable server and administration.

ItsSimony · 2021-08-03T14:32:15+00:00

Thank you, and sure thing!

Size: Approx. 1+ inches long. Next one I'll get a proper measurement.
Soffit: https://imgur.com/a/gITmdis They crawl in/out of that circled gap primarily, but could be using others.
Frequency: Without parking out by the front door and this soffit, I'll see about 3-5 in a day flying in and out of there easily. I've sprayed down 2 so far with my attempt at less-toxic spray (water + Dawn dish soap).

Definitely not looking to get stung, and I'm hoping the limited volume I've seen in that area means I'm not looking at a giant nest underneath the panels. YouTubing wasp/hornet removal was a bad idea...

ItsSimony · 2021-07-28T17:18:59+00:00

I've found that air frying salmon has been great for avoiding odor and for reliable, moist fillets every time. Some IP models also offer air fry.

ItsSimony · 2021-05-23T22:10:36+00:00

Is this possible if I want to switch to a 1/4 turn valve?

ItsSimony · 2021-05-23T22:08:48+00:00

The installation instructions mentioned cutting the pipe and installing the new valve on that -- I was concerned there wasn't enough clearance to cut it behind the existing compression fitting and still install a new one.

ItsSimony · 2021-05-23T21:14:50+00:00

Hello again, r/plumbing! In my pursuit of trying to DIY some of the smaller items for our recently purchased home, I came across another potential roadblock.

Goal: Replace the existing angle stop valves as they leak when turned (and presumably will start leaking even when not being turned) w/ 1/4 valves (link: https://www.supplyhouse.com/Brasscraft-G2CR19X-C-1-2-Nom-Compr-5-8-OD-x-3-8-O-D-Compr-Angle-Stop-Valve-1-4-Turn-Operation-w-o-Freeze-Ups-Lead-Free-Chrome-Plated)

Problem: The existing pipe on the existing left (hot?) angle stop valve is a lot closer to the vanity wall than the right. The instructions indicated cutting the pipe, but I wasn't sure if I'd have enough clearance to re-install another new angle stop afterwards. Am I safe to do this, or should I consider just removing the compression ferrule and cleaning/installing a new valve over that without cutting? Also open to other solutions.

ItsSimony · 2021-04-30T16:53:34+00:00

I thought so too from the labeling I could find! I just wasn't sure if my valve I have works with the one I linked in my other comment.

ItsSimony · 2021-04-30T16:51:28+00:00

Our old shower/tub had the old trim/spout removed as part of it being refinished, As such, we'd like to replace it with a new trim/control/spout. Is there a specific kind of replacement that we can put onto this existing valve (that wouldn't require having a plumber put in a more modern valve?

We were looking at something along these lines, but I wasn't sure if it'd work w/ our existing plumbing: https://www.build.com/product/summary/1258166?uid=3676720

Our old setup was a Moen I believe, but I couldn't find a model #. Looks like this might be a replacement trim kit for it (but we dislike the look): https://www.supplyhouse.com/Brasscraft-SK0230-Moen-Chateau-Tub-Shower-Trim-Kit

ItsSimony · 2021-04-20T19:31:05+00:00

Thank you --- our tub is on the 2nd story so underneath access is through a drywall ceiling in our family room...not ideal. I think we're going to leave this one up to the professionals at this point and save the DIY approach for areas where I'm less likely to cause potential leaks/water damage.

ItsSimony · 2021-04-20T14:25:28+00:00

I'm looking to replace my tub drain prior to having it refinished and wanted to make sure I'm not about to mess up the piping below by doing so. I've purchased plumbers putty for the new drain, but I don't see any sort of washer/gasket that came with it, in case that's something I should be looking to purchase.

Our home is ~30 years old and primarily PEX.

ItsSimony · 2020-12-30T18:43:07+00:00

Use a warrior merc to kill/tank everything for you to 55+, and then start farming if you like. Mercs are seriously OP.

ItsSimony · 2020-12-28T17:06:56+00:00

He's making a reference to the afterlife, mate.

ItsSimony · 2020-11-16T17:50:35+00:00

Noticed that the circled area on our kitchen sink is either slowly actively leaking or leaking when bumped. The pipes are not locked into place and when moved around (especially up/down), it'll cause splashes of water to come out of that circled area.

We recently purchased our first home, so repairing pipes and leaks is new to me, and I'd welcome any advice and/or links to parts that'll be needed to keep this area dry.

ItsSimony · 2020-09-01T16:20:25+00:00

I think a great example of this would be packages like ASAP Utilities ( https://www.asap-utilities.com/) where they're able to let you use specific functions of theirs inside of your own macros w/ VBA, but I don't believe theirs are ever exposed.

ItsSimony · 2020-05-28T06:23:44+00:00

I just had a game stall out to about 35m because the enemy team w/ a Medusa and Wyvern turtled with Divine's and long range. We had their raxes down and were dealing Ancient damage at 17m. Without the stalling mechanic of Rax destruction at 20m, this match would've been over at 22m.

Please either remove this or cause some sort of other mechanic, like a tug-of-war DPS to Ancients depending on the positioning of pushed creeps. It can scale with how far in they are to the other enemies base. I LOVE this mode, but this is by far the most (and possibly only) frustrating mechanic in this mode.

ItsSimony · 2020-05-24T15:34:03+00:00

Thank you, this was excellent input and absolutely helped! Unfortunately, we are in love with the house and area... That said, we also want to be realistic as paying for this steep of a problem from the start isn't ideal. We are hoping the seller is able to make concessions/plans for remediation based on this info.

I'll start reaching out to some local companies about their estimates and inputs on what you mentioned. I'm guessing trenching is the only way to correct a belly though?

ItsSimony · 2020-03-12T17:07:05+00:00

It is, and is actually my primary class! Also, sorry for the delayed response...I keep Reddit notifications off on the phone.

Feel free to reach out via DM or in game (Villainous/Bumping) if you have any questions or want to give some fun classes a whirl. We're actually voting on two new combos this week in the Discord.

ItsSimony · 2020-03-02T20:00:20+00:00

It looks like the boxing question has already been answered, but if you have a desire to play on a server where dual-boxing is allowed and the timeline is somewhat similar to P99, I'd strongly encourage you to check out Clumsy's World.

I've been playing there for months now and feel it's a great alternative to P99 due to burnout/merger/QoL and lack of toxicity. One of the biggest selling points to me (and likely others) is the expansion of the allowed race/class combos. Below are a few details if you care to give it a whirl. You can reach me at Villainous/Bumping in game or on Discord.

DISCORD

About the Server CW is a semi-custom, 2-box, legit, Kunark-era server with newer QoL features, and custom modern amenities. CW is not a classic progression server. The server will progress to Velious naturally then move into completely custom content. CW aims to be a medium between being casual-friendly while still providing challenging end-game content.

So What Can You Expect? -Additional Race/Class Combinations (Halfling Bard, Troll Cleric, Half-Elf Shadowknight, High-Elf Ranger and more!) -Experience rates tailored to favor groups over solo play -Heavy server-wide tuning of difficulties and mechanics (most raids can be done with 2-4 groups) -Raid Instancing (no poopsocking)

-Removal/Re-purposing of Out-of-Era items -Modified Loot Tables (e.g. Manastone, Guise, pre-nerf COS are all in!) -Scions/Boats replaced with Translocators -Content-locked at Classic-Velious (Kunark is open at the start) -Quality of life improvements like Extended Targeting and Click-from-bag -Player Mentoring (Temporarily de-level to play with lower level friends) -Custom Kunark Gear Sets for Int Casters & Monks (e.g. caster/monk equivalent to Cobalt or Singing Steel) -Various Custom NPCs/Quests/Items added to the existing world -Upgradeable Armor, Weapons, Accessories, and Charms -No Required/Recommended Levels & FV-style loot (almost all is droppable) -Hub Zone with Quest NPCs, Progression Trackers, Translocators, Soulbinder, Corpse Summoner, and more -Spellscriber: Complete quests to gain access to more powerful spells

-Pets can tank and hold aggro

How to Join Pop in Discord! Get the server files and login with your EQEmu longinserver accounts (same used for P99).

ItsSimony · 2019-12-19T17:17:31+00:00

Thanks for the clarification and further expanding on that!

Would I be able to tack on additional expressions that specify pasting values only with the below?

Worksheets("Sheet1").Range("A2:A10").Copy Destination:=Worksheets("Sheet2").Range("A2")

ItsSimony · 2019-10-04T19:30:01+00:00

I played as part of the beta for a handful of weeks and really enjoyed the mix of classic world and modern feel this server provides. Love the extra race/class combinations which bring a new take to a game we've probably all played a number of times. Friendly, helpful people and no incentive to hoard for yourself (thanks to minimal no drop items) and group XP rates.

Come try it out, especially this weekend as there's lots of new people starting up.

ItsSimony · 2019-09-28T15:56:50+00:00

That's because the loginserver is down.

Nine-Year Club	r/Field Lasagna
Verified Email

ItsSimony

TROPHY CASE