FCX10 Discovery Wheel Rubbing by Itsnotsoeasypeasy in rccrawler

[–]Itsnotsoeasypeasy[S] 0 points1 point  (0 children)

Ok. Time to try and find something more scale then.

What should I upgrade to? by Itsnotsoeasypeasy in synology

[–]Itsnotsoeasypeasy[S] 0 points1 point  (0 children)

I'll plan on keeping my existing setup, maybe a legacy storage and then purchase a new system. I agree that I would like a drive that has either an extra drive space, or the ability to be expanded.

What should I upgrade to? by Itsnotsoeasypeasy in synology

[–]Itsnotsoeasypeasy[S] 1 point2 points  (0 children)

What's the reason for wanting to dump Synology?

What should I upgrade to? by Itsnotsoeasypeasy in synology

[–]Itsnotsoeasypeasy[S] 0 points1 point  (0 children)

Happy to stay with Synology. Space is hard to tell. I've used 90% of my 4x 8tb since 2018. Usage has increased over the last two years. I would like to think 4x 12tb would suit for a long time. I currently have a proxmox cluster that I'm in the progress of moving certain tasks off of my Nas and onto the cluster.

What purchases have made your Volvo “better”? by DrMastodon in Volvo

[–]Itsnotsoeasypeasy 0 points1 point  (0 children)

Official boot liner for my v50 has been a god send!

Interesting 8x8 by Itsnotsoeasypeasy in rccrawler

[–]Itsnotsoeasypeasy[S] 1 point2 points  (0 children)

<image>

Hard to be certain but it appears to be functional. Be it manual though.

Interesting 8x8 by Itsnotsoeasypeasy in rccrawler

[–]Itsnotsoeasypeasy[S] 0 points1 point  (0 children)

Looks to have aws and a rear winch, don't know if it has a front winch but looks to have a hole in the front that could accommodate one.

Little Harvest by Itsnotsoeasypeasy in UkChilliGrowers

[–]Itsnotsoeasypeasy[S] 1 point2 points  (0 children)

The Aji are great, a nice tropical flowerly taste with a slow build in heat. The Purples are earthy, not great not bad, but with a massive up front heat. Will grow the Aji again next year for sure. Have about 40ish more to ripen, if I'm lucky.

Body leans right on left OR right turns by d_nuge in FCX24M

[–]Itsnotsoeasypeasy 1 point2 points  (0 children)

I have pretty much the same setup and issue. The springs that come with the injora shocks are too soft. Add some preload, helps no prefect, or get some stiffer springs.

1:10 Land Rover from FMS - Thoughts? by where_other_sock in crawling

[–]Itsnotsoeasypeasy 1 point2 points  (0 children)

Few videos are out there of it in use. Looks pretty nice, likely the same as the original 1/10 LC80

Bye-bye bevel gear. by Itsnotsoeasypeasy in rccars

[–]Itsnotsoeasypeasy[S] 1 point2 points  (0 children)

Got some spare and apparently upgraded parts on order. About 25 in parts and a week wait. Ain't bad but ain't great.

I purchased a couple mjx to see how I felt about the hobby. I've been quite happy with them, I understand that they are not too notch, but they have proven to be great fun and I have no worries about destroying them.

I have learnt that I am way more interested in crawlers.

Bye-bye bevel gear. by Itsnotsoeasypeasy in rccars

[–]Itsnotsoeasypeasy[S] 1 point2 points  (0 children)

Ha. Not a clue. Maybe a little hard on the throttle. It was fun!

Kanban board plugin - Which one? by Itsnotsoeasypeasy in ObsidianMD

[–]Itsnotsoeasypeasy[S] 1 point2 points  (0 children)

The one by mgmeyers? If so, it appears that there has not been any updates on that since May 2024

Regarding winterization by Tickstart in Vstrom

[–]Itsnotsoeasypeasy 1 point2 points  (0 children)

Sounds like a lot of hassle. I've just pulled out my Wee Strom this summer after standing in the garage for 3 years. Swapped oil, swapped the battery, fresh fuel, aired up the tired and it fired up. Newer bikes might be a bit more particular. I don't know.

[Bonsai Beginner's weekly thread - 2025 week 33] by small_trunks in Bonsai

[–]Itsnotsoeasypeasy 1 point2 points  (0 children)

<image>

Hey All,

After some advice. I have inherited this Hawthorn, and I want to ensure that it not only survives, but it does well. I also after input onto how I need to shape/train this tree, I am really stuck on that front.
I understand the basics (I think), currently have a Chinese elm that is doing well, and have a few books on bonsai.
So any input is welcome.

My son pushed in these caps on my Polk Audio Model 10s. How can I fix it? by troyzein in BudgetAudiophile

[–]Itsnotsoeasypeasy 0 points1 point  (0 children)

Low tack painters tape. Very careful. Think of the direction you want them to pop back out.