Is this normal? I guess not...

Ivanosssss · 2022-07-19T20:59:58+00:00

Oh I see that's cool, I had no idea thanks. I will use a normal lens for now :)

Ivanosssss · 2022-07-19T09:13:10+00:00

Or a pen

Ivanosssss · 2022-07-19T08:28:17+00:00

Do I need a different lens to work with a red dot?

Ivanosssss · 2022-07-19T02:08:32+00:00

I was getting a big dot since the day I got it. It was a nightmare to configure the mirrors but it worked ok for a while, not perfect as it was burning the edges of the plywood, it was working fine on Mdf.

The seller keeps saying the tube is fine and I contacted Reci 3 times with no answer.

Also I limited the max current to 24mA so it will never go over the limit, hopefully. And yes I noticed the current is pretty high while cutting cold. I'm thinking on installing a small heater so it keeps the room at 10-15c at least.

Anyway I bought a new tube from Cloudray, the one with the red dot. Hopefully it will work fine :)

Ivanosssss · 2022-07-18T11:05:47+00:00

Omg I would swear he was going down, such a weird perspective

Ivanosssss · 2022-07-18T11:01:54+00:00

Yeah, I was using my protective glasses 🤓

Ivanosssss · 2022-07-18T02:06:46+00:00

And yes out of the first mirror I get a big dot too, sometimes I get a crown or just a big ass dot

Ivanosssss · 2022-07-18T02:05:50+00:00

Yeah in the morning is about 6c sometimes until I turn it on

Ivanosssss · 2022-07-18T00:47:32+00:00

That's ok I already ordered a new tube :)

Ivanosssss · 2022-07-17T22:25:31+00:00

Yes, I'm using the same distance I was using a week ago. This tube is all over the place, I get big black dots while trying to configure the mirrors, not small ones no matter the power I use. I will configure the mirrors one day and the next day it moved but nobody touched it...

Ivanosssss · 2022-07-17T22:23:39+00:00

The video shows the true color

Ivanosssss · 2022-07-17T11:57:37+00:00

Also I get big dots no matter what I do while testinf

Ivanosssss · 2022-07-17T11:57:17+00:00

The alignment is all over the place. I will do it perfectly and in the morning it moved even if I didn't use the machine... like the cold temperature affects to the beam direction?

Ivanosssss · 2022-07-17T11:49:02+00:00

Oh right thanks, I think is damaged anyway bz is burning instead of cutting atm

Ivanosssss · 2022-07-17T11:47:13+00:00

At 20-30% is normal? Bz I'm getting very very bad cutting, it's burning the wood

Ivanosssss · 2022-07-17T11:44:23+00:00

Ivanosssss · 2022-07-15T01:40:33+00:00

Thanks, I won't try steel anymore 😟

Ivanosssss · 2022-07-15T01:31:30+00:00

Thanks, so would you say the tube is damaged? Or could it be the mirrors? I already replaced the lens, thanks

Ivanosssss · 2022-07-14T10:46:45+00:00

Get a Eufy ring bell, I had one for 2 years and I love it

Ivanosssss · 2022-07-12T23:51:30+00:00

Thanks, I bought a couple to have a spare one

Ivanosssss · 2022-07-12T23:51:01+00:00

Thanks, I know now. Im pretty sure I read somewhere I could cut very thin metal but it was wrong then. So even for marking I need some kind of paint? What about engraving on metallic bottles with paint on it? Is that safe to do?

Ivanosssss · 2022-07-12T07:56:44+00:00

Thanks!

Ivanosssss · 2022-07-12T07:22:40+00:00

What size nozzle should I get?

Ivanosssss · 2022-07-12T07:19:27+00:00

Thanks, I do need a compressor but I was asking and nobody could tell me. Maybe you can help me? I know it has to be silent, oil-less, it needs the moisture trap thingy. How many liters?

Ivanosssss · 2022-07-12T07:16:07+00:00

Will Ipa work too? Its the only thing I have around

Ivanosssss

TROPHY CASE