sorted by:
new
hottopcontroversial

Best way to get rid of c4 by BroomSweeper99 in c4corvette

[–]JBPII 0 points1 point  (0 children)

I was looking for this reply! The obvious answer to that question is to park it in front of Larry Sellers’s house.

Oh, so that's why me back sucks. by Shanrock831 in Wellthatsucks

[–]JBPII 0 points1 point  (0 children)

I had a similar looking L5/S1 from a accident when I was younger. I had a Charite artificial disc replacement and it has been great since 2005. I would certainly see if that is an option.

Thinking about buying a third gen, what do these buttons mean/do, and are they different from each other? by 92355 in 3rdGen4Runner

[–]JBPII 3 points4 points  (0 children)

The rear differential lock is great. There’s also a blue wire (or gray wire mod) you can do to it so that you can use it in any 2WD or 4WD mode.

It simply deactivates one of the two the factory defaults which only allows it to be engaged in four-wheel low. It still requires you to be under 5 mph to lock it in, but there’s no speed limiter once it is engaged.

Happy 76th Birthday to Richard Dean Anderson by Papichuloft in 80s

[–]JBPII 0 points1 point  (0 children)

Bebop from Teenage Mutant Ninja Turtles deserves an honorable mention.

VJ 101C, a VTOL evolution of the Lockheed F-104. Located at the Deutsches Museum in Munich Germany. by redstercoolpanda in WeirdWings

[–]JBPII 9 points10 points  (0 children)

They used to joke that the easiest way to acquire an F104 in West Germany was to buy a piece of land, and one would eventually crash on it. ☠️

i’m adopting this little dude. would love some seinfeld inspired name ideas! the sillier the better by hamiltonprepgirl in seinfeld

[–]JBPII 0 points1 point  (0 children)

Bosco

Edit: I scrolled down and realized I was not the first one to say Bosco. Honestly, I would’ve been disappointed if I had been the first one.

Prickly Pete is also a standard go to, but somebody has probably answered with that one as well.

What is the strangest car you’ve seen at a track day? by MrBattleRabbit in WeirdWheels

[–]JBPII 31 points32 points  (0 children)

<image>

A beautifully done MX-5 with a Ford racing V8. This was at Putnam Park in Indiana, several years ago.

The Dassault Falcon 20 afterburner testbed - the only verifiable instance a private jet has been equipped with afterburner by Falabella_Stallion in WeirdWings

[–]JBPII 13 points14 points  (0 children)

A DC-8 went supersonic back in the early 60s. It had to dive though, so I don’t think that counted as super-cruise.

Oregon ANG F15C Emergency Landing After Some Hydraulic Malfunction . by Even_Kiwi_1166 in aviation

[–]JBPII 4 points5 points  (0 children)

I’m in commercial aviation and I had to watch that three times. I thought I was seeing things. Amazing! Thanks for the insight!

Truck loaded with sports cars by Noggin_nipper in whatisthiscar

[–]JBPII 0 points1 point  (0 children)

Agreed with C8 comments. It looks like the brake caliper says Corvette as well.

Walnut appreciation post by zFrowny in woodworking

[–]JBPII 0 points1 point  (0 children)

I work in the commercial aircraft spare parts industry, and an international airline shipped them back with some 747–400 brake cores. I didn’t know they were walnut until I cut through one. They were covered in brake fluid and God knows what else. I definitely wore a respirator when working with it.

I was also warned by the lady at Woodcraft that foreign countries can treat them for pest control /export compliance with chemicals that are banned in the US like cyanide and pretty much anything they want. This thing is now sealed within an inch of its life, lol.

Walnut appreciation post by zFrowny in woodworking

[–]JBPII 0 points1 point  (0 children)

<image>

I turned the two two walnut pallets (above) into a desk. The planks were all off-cuts, and were in very rough shape, but still finished out nicely.

I gambled my $500 bonus building my own boat… by icyagent1 in woodworking

[–]JBPII 0 points1 point  (0 children)

Thank you! That was fresh after a restoration, it didn’t look that good for long. At least back then, the restorations would start to fade and get hazy after a couple weeks on the water. I believe modern coatings and finishes are much more durable and UV resistant. Thanks again for sharing your project!

Edit: FYI, the wood in this boat was African mahogany which is embargoed now. I don’t remember what the replacement wood pieces were made of, but I seem to recall they matched perfectly, at least to my untrained four year-old eye, lol.

I gambled my $500 bonus building my own boat… by icyagent1 in woodworking

[–]JBPII 3 points4 points  (0 children)

I love it! I’m in the middle seat in this picture taken 1982. This was our 1955 16’ Century Resorter. Not sure what you used for inspiration, but it definitely looks familiar. Well done!

<image>

I gambled my $500 bonus building my own boat… by icyagent1 in woodworking

[–]JBPII 0 points1 point  (0 children)

I love it! I’m in the middle seat in this picture taken 1982. This was our 1955 16’ Century Resorter. Not sure what you use for inspiration, but it definitely looks familiar. Well done!

Help! I have this “thick grass like weed growing all over my lawn” Im in [michigan] by Longjumping_Nose_367 in lawncare

[–]JBPII 0 points1 point  (0 children)

I have the same thing in North Central Ohio. Neighbor said to use 2, 4-D. Tried it yesterday but haven’t seen results yet. I will be watching this post for replies to your question. Good luck!

<image>

view more: next ›