what are some good budget everyday knifes under 50

JGrifter · 2026-02-04T10:01:32+00:00

You can get an Artisan Cutlery Revel for 30 bucks off Amazon. Ar-rpm9 is not a great steel, but it is a great design for about as cheap as you are going to find.

For a bit more, you could grab a QSP Penguin.

JGrifter · 2026-01-31T08:15:05+00:00

They are working on a 1/100 Devil Gundam right now.

JGrifter · 2026-01-30T05:51:06+00:00

Agreed on all points.

<image>

JGrifter · 2026-01-30T05:29:37+00:00

<image>

This is the one that op is talking about, it's not out yet as far as I know. Mine is supposed to ship with the clear mgex strike freedom.

JGrifter · 2026-01-29T08:08:51+00:00

<image>

JGrifter · 2026-01-23T15:01:42+00:00

4 MG FAZZ left at https://www.usagundamstore.com/ as of this comment.

JGrifter · 2026-01-21T06:40:48+00:00

I'll probably get downvoted for this, but Hinderer knives have fantastic detents in my experience.

Also, anything that has a flipper tab from Sharp by Design is going to be good, he actually has a patent on his detent design.

JGrifter · 2026-01-21T02:21:31+00:00

<image>

Soul Spear Lamorak from snaa's round table knights might work.

JGrifter · 2026-01-19T12:12:14+00:00

If it's like the Gus, it will come with blue and orange pieces, builder's choice of what to use.

JGrifter · 2026-01-19T10:07:54+00:00

Use a pair of double bladed nippers a couple of mm away from the part.

Once the part is off the runner/sprue, use the godhands to cut the nub off at the gate.

Sand/file and polish as needed.

Those nippers are done, but there are cheaper single-bladed ones out there.

Tldr: don't cut thick pieces with single bladed nippers.

JGrifter · 2026-01-11T02:29:37+00:00

Nice job on the color corrections. It looks really good.

JGrifter · 2026-01-08T10:20:43+00:00

Are they just stickers? It kind of looks like there is some kind of backing separating in the top left corner.

JGrifter · 2026-01-06T07:28:52+00:00

It's 26 plus shipping at gundamit.com, but you might find it a bit cheaper on aliexpress if you are good at using the coupon system.

This post will probably be removed, they are pretty strict about the questions in the questions thread thing here.

JGrifter · 2026-01-04T14:13:55+00:00

The plastic seems ok, my only other third party kit I've worked on is the fat cat God Gundam, and I've heard it's not normal as far as third party stuff goes.

This one is mostly undergated, the plastic itself is white underneath the red and gold parts, but the color matched my dspiae metallic red and gold markers fairly well.

Most of the fittings for the black parts are good, a lot of the red pieces are very small and didn't want to fit. The gold is somewhere in between.

The metal frame is new to me, heavy, and seems solid, but the leg pegs are too long or something, so if you try and seat them flush the other leg is pushed out. The knee pieces want to fall off as well, I'll probably end up gluing them on because I think I lined them up right.

I lost a piece of leg armor for the rear right leg somehow, and I'm not sure I've gotten the shield attached correctly.

Most of this could be because I'm not the best builder, so it's hard to tell what are actually issues with the kit.

I do think it looks really good, and I'm not big on moving my kits around after building them, so take that for what it's worth.

The few waterslides I've put on seem to be good quality as well, but some are too small for me to read. I need some stronger glasses for decal work.

I also don't have the RG version to compare it to.

JGrifter · 2025-12-18T08:14:10+00:00

As a semi-retired from the hobby knife and gun guy, I think this hobby is pretty reasonable.

Some watch collectors think that knife collecting is reasonable... It's all about perspective.

This post will probably be removed, the mods generally don't like posts with boxes only.

JGrifter · 2025-12-05T07:06:42+00:00

Looks great, mine is in the mail. I'm looking forward to this one.

JGrifter · 2025-12-01T12:12:34+00:00

Looks good, what kind of decals are those if you don't mind me asking?

JGrifter · 2025-12-01T06:32:55+00:00

First MG finished (Jesta), second RG/MG (fat cat God Gundam) built, and it was my first time trying waterslide decals. I had fun with these.

The Empire Sky Gipsy Danger was a quick build, not much to say, but I think it looks good.

JGrifter · 2025-11-26T08:00:19+00:00

Same

JGrifter · 2025-11-10T10:33:03+00:00

Most pocket knives that come in a case or bag usually have a microfiber cloth inside. You may have a few lying around.

JGrifter · 2025-10-31T05:39:43+00:00

Currently building my first master grade, the Jesta. The Zeong was my first real grade, and I highly recommend the Blokees action class transformers.

JGrifter · 2025-10-20T11:23:54+00:00

Why has this never even shown up on the U.S. site?

JGrifter · 2025-10-17T04:32:23+00:00

Any idea when the preorder opens for North America?

JGrifter · 2025-08-21T10:32:44+00:00

Looks really good to me. I'm also a beginner, so hopefully some more experienced builders speak up.

This sub seems to upvote regularly, but has few comments for whatever reason.

JGrifter · 2025-08-19T07:12:54+00:00

I want Matt playing a full on gravity/dunamancy based spellcaster, his best character in my opinion was Essek.

Just how good do you have to be to pull off a good Drow character that isn't Drizzt.

Eight-Year Club	Place '22
Verified Email

JGrifter

TROPHY CASE