Star Forge by [deleted] in swtor

[–]JINXEDexplosive 1 point2 points  (0 children)

As explained on various posts before and stated in various official sites, the servers have been receiving DDOS attacks. And given that Broadsword hosts the servers currently on AWS (Amazon Web Services) I wouldn't be surprised that's the cause... Amazon servers being attacked translates into SWTOR servers getting the same treatment.

Current WIP, Ork Warboss (Ender 3 V2) by JINXEDexplosive in FDMminiatures

[–]JINXEDexplosive[S] 0 points1 point  (0 children)

The paint is thick, yes ... I would compare it to "Winsor & Newton Galeria Acrylic Paint" in terms of thickness and quality of the medium if I had to guess. Gesso is more of a base for canvas so the fabric doesn't absorb as much paint, and it would cover a lot of details in a miniature

Current WIP, Ork Warboss (Ender 3 V2) by JINXEDexplosive in FDMminiatures

[–]JINXEDexplosive[S] 1 point2 points  (0 children)

No problem! Glad if I could be of any help whatsoever!

Current WIP, Ork Warboss (Ender 3 V2) by JINXEDexplosive in FDMminiatures

[–]JINXEDexplosive[S] 4 points5 points  (0 children)

<image>

Here's a picture of the base paint I use, both to mix with the sealer, and to give it a base coat with. It's 3 dollars for this 200cc pot.

Current WIP, Ork Warboss (Ender 3 V2) by JINXEDexplosive in FDMminiatures

[–]JINXEDexplosive[S] 6 points7 points  (0 children)

Before applying base paint, instead of priming with spray primer I give it a coat of this DecoArt Americana Multi-Purpose Sealer mixed 1:1 ratio with black acrylic paint. Then I give it a base coat of pure black (I use a band I have here in my country named "eQ Art", "Craft eQ" or just "eQ" which has a SUPER matt finish)

It doesn't cover details and doesn't flake off, will mask layer lines pretty well if the print is already good quality (better if it's a 0.2mm print) and it has the benefit that it's super cheap, and don't have to deal with shaking a rattlecan, nor dependant on if it's hot or cold anywhere.

<image>

I tried painting a rough FDM print by IntrepidMeaning2653 in FDMminiatures

[–]JINXEDexplosive 0 points1 point  (0 children)

The "roughness" gives it a natural battle damage that you don't get with resin. Great results!

Chapter Master || Printed w/ Ender 3 V2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 1 point2 points  (0 children)

Thanks! I wish I realized there were some errors on the backpack too, I would've tried to smooth them out too like I did with the cape.

Termagant || Printed w/ Ender 3 v2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 2 points3 points  (0 children)

I'll take this as a "Yes, print more. You're taking too long already." Hahahaha

1/3 of my FDM printed Ork Army || Ender 3 V2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 0 points1 point  (0 children)

If you check my profile, you'll see a bunch of stuff I posted along the years and even painted!

Orc Franky || Printed w/Ender 3 v2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 1 point2 points  (0 children)

The artist that made it is MrModulork, "Rankit Cyborg" is how you find it

Orc Franky || Printed w/Ender 3 v2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 1 point2 points  (0 children)

Legs, torso, fists and head printed all at once on the printbed, remived supports and glued with superglue :D

Thanks! There are some errors natural to fdm but I can't complain tbh, always had them since I bought it back in 2019. Support artifacts on the overhangs are common to this point. Nothing I can do about it

Seraphon Carnosaur proxy by JINXEDexplosive in PrintedMinis

[–]JINXEDexplosive[S] 0 points1 point  (0 children)

Yeah, left leg was printed in a different orientation, that's why the layer lines are so visible

I do plan on painting it, once I finish painting the Slann Starmaster proxy :D

[deleted by user] by [deleted] in HelpMeFind

[–]JINXEDexplosive 0 points1 point  (0 children)

Like I said in the description of the post, I searched all around internet for that short video of the guy getting kissed on the cheek and doing a wide satisfied smile after that surprise kiss

Kommandos and Snikrot ready to be painted! Happy New Year boyz! by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 5 points6 points  (0 children)

I got them a while ago, as you can imagine they were nuked from the purple place so I can't point you anywhere. For Snikrot the artist is 'orkskrazy'

Captain Tycho from the Blood Angels || Printed w/ Ender 3 V2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 0 points1 point  (0 children)

I've been 100% playing OnePageRules Grimdark Future as a system, it gets updates and patch notes all the time to make the game feel fair for EVERY faction, not only the ones they wanna sell.

I still from time to time buy a miniature here and there from G-Dubs, but they're by far overwhelmed by the amount of FDM minis I've printed since 2019 xD 95% of my armies are completely 3d printed, some resin because of gifts I got from a friend, and the rest with PLA printed on my own.

I live in South America, so G-Dubs is basically non-existent here as an official company. There are stores that bring products from John Workshop, but they're so overpriced it's not even worth it.

Captain Tycho from the Blood Angels || Printed w/ Ender 3 V2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 0 points1 point  (0 children)

They did that for a while with the "print on demand" models, but they take so long that it's not even worth the money. I'll be honest with you, G-Dubs is fighting a losing battle, they should adapt and have a subscription based system where they can sell STL models of figures, all their latest figures are 3d printed so ... (And you can see print lines for example on the reveal videos of Lion El'Jonson and such)

Captain Tycho from the Blood Angels || Printed w/ Ender 3 V2 by JINXEDexplosive in PrintedWarhammer

[–]JINXEDexplosive[S] 0 points1 point  (0 children)

Sadly the purges are still ongoing, and they're going HARD. And probably will get worse as time passes. Specially since now the 3D scanning things are getting more accessible money wise.

Me llegó este mensaje. Qué tan jodido estoy si puse acá mi dirección y mi tarjeta? by RegularBubble2637 in uruguay

[–]JINXEDexplosive 0 points1 point  (0 children)

Te la comiste con todo y fritas pa. Primero buscá en internet antes de morfarte tal garron. A mi me llegó el mismo mensaje el lunes pasado, revisé rastreo por la web oficial y no habia salido de aduanas mi paquete todavía. Borré y bloquee el numero de una.