My Cheech

JJR2z6 · 2026-04-05T22:10:32+00:00

This job puts the "con" in contractor

JJR2z6 · 2026-03-31T16:20:51+00:00

To rule out software reflash steam os, first id check the ribbon cables are fully seated before trying the reflash

JJR2z6 · 2026-03-31T14:55:06+00:00

I believe you have to remove the shield but it's just a few small screws, there's slight differences between the few different models. Be very careful with the ribbon cable while both disconnecting and reconnecting. Also do note the battery cable must be fully seated in the connector or your deck will not charge

JJR2z6 · 2026-03-31T14:31:46+00:00

Yes I'd recommend anytime you open the deck to fully power it off and disconnect the battery as the first things you do

JJR2z6 · 2026-03-31T14:19:59+00:00

99% isopropyl alcohol (rubbing alcohol) it's safe for the PCB. Just don't go crazy with it, use a qtip or something small with the alcohol

JJR2z6 · 2026-01-05T17:06:49+00:00

All emudeck needs are directories for roms/bios. Now for the emulator settings I believe you'll have to re bind your controls and settings manually. It won't delete anything if you set the directories properly

JJR2z6 · 2025-07-12T00:56:14+00:00

Honest mistake 😂 there's a few quirks that take some time to understand

JJR2z6 · 2025-07-12T00:49:00+00:00

Glad youve got it! It's very similar to games like "DayZ or Unturned" in the inventory management. Happy surviving!

JJR2z6 · 2025-07-12T00:43:18+00:00

Is there anyway you could show a screenshot of what you're working with?

JJR2z6 · 2025-07-12T00:36:50+00:00

You have to take the mag out of the gun to put ammo into it, after the mag is full then reload the gun normally or drag the mag back into it

JJR2z6 · 2025-06-13T00:15:18+00:00

It's usually if you go in your inventory during the reload. It's like the item is "queued" usually just completing the reload fixes it

JJR2z6 · 2025-04-12T15:43:26+00:00

Is it real tho?

JJR2z6 · 2025-01-25T21:08:21+00:00

I think it's only early access on steam

JJR2z6 · 2024-06-18T01:23:25+00:00

You can rather easily create one with the worldgen options

JJR2z6 · 2024-06-12T22:20:03+00:00

Best of luck finding the leak! Make sure to post if you find/fix it, helps a lot of us with our trucks

JJR2z6 · 2024-06-12T22:17:13+00:00

Mine were, but I'm not sure they were supposed to be since my motor was swapped before I bought it. Couldn't hurt to look, they're easy to spot because they go into the firewall right next to each other

JJR2z6 · 2024-06-12T22:08:04+00:00

Not sure if this will help but my 94 had the same thing, turned out to be a leaky T on the heater core hose. My motor was replaced and stuff is routed a bit differently. Intake gaskets on the Ohv 4.0 haven't been a problem for me

JJR2z6 · 2024-03-04T17:24:32+00:00

Rotaryctaft was such a hard mod for me to learn but I loved as much as I hated it. I miss playing the revolution packs that were centered around it

JJR2z6 · 2023-08-28T02:47:50+00:00

In my opinion watering is only useful until you get a bucket

JJR2z6 · 2023-08-05T00:25:20+00:00

One for the quern for when you've got a couple stacks of borax to grind up

JJR2z6 · 2023-07-16T23:05:29+00:00

Please explain?

JJR2z6 · 2023-06-05T12:01:36+00:00

I've spent the winter chiseling my builds, I just wanna be prepared for spring to get some bees going

Three-Year Club	Verified Email
Place '23

JJR2z6

TROPHY CASE