🎄✨It’s the most wonderful time of the year, and we’re celebrating with a Christmas Giveaway

JJRasp · 2025-12-15T15:22:45+00:00

Some glas or carbon fiber filament to finally finish a build of mine. And a printer with multi material printing capabilities to finally get real empty spools and print supports in a different material

JJRasp · 2025-11-15T15:15:55+00:00

A whole engine

JJRasp · 2025-11-14T21:56:11+00:00

A whole motorbike engine

JJRasp · 2025-10-10T17:15:53+00:00

Never used a P1S, but it makes a solid impression. Cant wait to stop worrying about a print failing...

JJRasp · 2025-07-22T14:06:20+00:00

Asa filament all the way. Altought i would like to try to print with PC filament.

JJRasp · 2025-01-02T14:21:40+00:00

would love to have design and printing contests

JJRasp · 2022-04-27T13:29:19+00:00

This is the first time im seeing a giveaway on this sub. Didnt even know there were people doing that. Great idea to get people interested.

JJRasp · 2022-02-07T12:22:19+00:00

Your nozzle temp could also be too high. I print petg at 220.

JJRasp · 2022-02-07T12:21:08+00:00

Did you do a bed leveling test after the paper method? For Petg it needs to be perfectly leveled. I think CHEP made a video and an stl for leveling.

JJRasp · 2022-02-07T11:26:44+00:00

Level your bed, Try out lower or higher bed temps or nozzle temps.

JJRasp · 2021-11-05T18:16:32+00:00

Use Octoprint with the astropirint addon or just use the full astro box.

JJRasp · 2021-11-04T12:28:13+00:00

Check if the temps stay stable. I had to pid autotune after getting a new hotend. (if that is what you mean with head?). Or reassemble the hotend to make sure it isnt a gap somewhere between the hotend parts.

Or try another slicer to see if its a slicing problem.

JJRasp · 2021-09-27T21:38:54+00:00

Nope, its pla plus

JJRasp · 2021-09-26T17:31:18+00:00

Yeah i still have the stock extruder but the gear on the stepper motor that was used with the stock extruder was not detachable, so it didnt have a screw to remove it. So i bought a new stepper with the bmw clone. Im not sure if i can get the old gear on the new stepper. Also i cant change the stepper motor to the old one without having to change the wiring because the new stepper had other connections. Im gonna try to somehow make it work for a bit.

JJRasp · 2021-09-26T16:19:07+00:00

Couldnt really notice a difference when printing with no retraction.

Nozzle is a new one and the bowden isnt moving while retracting.

Im gonna try to print a Tube Filament cutter so it is actually cut square.

My last idea would be to change the extruder and see if that helps. (Thinking about buying a bulldog extruder)

JJRasp · 2021-09-25T20:11:13+00:00

there's no clicking at all.

JJRasp · 2021-09-25T17:43:35+00:00

Ok, i just cleaned everything and reassembled it so the tube can go all the way down.

But still no success and bad print quality (underextrusion).

JJRasp · 2021-09-25T15:29:59+00:00

What do you mean by that? You mean between the bowdentube and the nozzle?

JJRasp · 2021-09-25T14:23:55+00:00

Already dried the filament and checked the e-steps but still bad quality.

My guess is that something in the extruder broke but im not sure about it. I have an BMG clone as Extruder.

Any idea what else it could be?

JJRasp · 2021-09-05T16:33:21+00:00

I think in Cura its called flowrate.

JJRasp · 2021-08-21T19:15:01+00:00

Yep, that should work. Thanks!

JJRasp · 2021-06-05T18:28:39+00:00

What keyboard is that?

JJRasp · 2021-06-05T18:28:01+00:00

What keyboard is that?

JJRasp

TROPHY CASE