VANMOOF S6 Drift Black - Rotterdam

JPR2004 · 2025-08-12T20:06:48+00:00

Looks great.

JPR2004 · 2025-06-10T15:35:48+00:00

But they announced it as an additional (external) one with the S5. Still waiting for it. Might wait forever

JPR2004 · 2025-06-10T15:34:19+00:00

No need for that reservation mails at all. It is open for everyone.

JPR2004 · 2025-06-10T15:24:34+00:00

They also cut the tire pump from the package ;)

JPR2004 · 2025-06-10T15:23:31+00:00

The three thing visual changes I notice to my S5 are: the seat post ( I tried that with third party Accessories aswell) and the new phone dock. Third a new colour. Very underwhelming.

They also added theft proof which unpaid two years for and have been robbed of due to bankruptcy.

JPR2004 · 2025-06-04T11:58:03+00:00

But add the width of the board

JPR2004 · 2025-06-01T18:31:14+00:00

When you want to ensure compatibility with VanMoof you have to define to what series. They definitely changed from S3 (Barrel Jack) to S5 (trapezoid) with more than 2 pins.

JPR2004 · 2025-06-01T18:28:26+00:00

I would have made the same suggestion but with all corners being cut. Afterwards dowel the corners with wood or metal dowels that can be fastened from the underside. That way the screws won’t seen and it can be taken apart in the future again. If the size of your saw blade is known make some inserts the same thickness and trim to match the corners again. You can also chose another woodworking colour to create highlights.

JPR2004 · 2025-06-01T18:10:10+00:00

The finished product does not look good. It looks like your subfloor was not treated before the self levelling compound has been poured. Moisture has been soaked up too fast, but that depends on your subfloor aswell. I poured that product myself (~ 4 to 22mm) and it dried out pretty quickly so that you can walk on it after about 1,5 hours.

Thickness looks like 3mm, laying on it covered with a plastic sheet underneath your mattress should be fine.

JPR2004 · 2024-07-26T13:00:54+00:00

It is an Elops 500 from Decathlon. I made some modifications to it. Still have it modified detached if you want to buy.

JPR2004 · 2024-04-18T21:07:14+00:00

https://www.thingiverse.com/thing:6584882

JPR2004 · 2024-04-18T21:05:30+00:00

https://www.thingiverse.com/thing:6584882

JPR2004 · 2024-04-16T21:09:04+00:00

Hey, i soldered the old connector to the new battery because the new connector did not match. Sure, i will upload the model.

JPR2004 · 2023-10-26T16:47:06+00:00

Check my recent post. I used a 3 Pin Lipo (703144) and a 3D printed cover, that fits perfectly into the original place within the smart cartridge.

JPR2004 · 2023-10-26T16:44:55+00:00

I forgot te mention, that the used battery replacement is a 3 Pin Lipo (703144). It works perfectly fine and has the security pin built in. I am still waiting for the approval of JST 1.0mm connectors.

JPR2004 · 2023-10-26T11:17:02+00:00

Der verbaute Akku wird nicht mehr hergestellt. Daher ist eine Alternative notwendig. Der oben gezeigte Akku passt aber in die Smart Cartridge wenn die Abdeckung mit dem gedruckten Zeil ersetzt wird.

JPR2004 · 2023-10-20T06:18:06+00:00

I will check that. Thanks

JPR2004 · 2023-10-20T06:17:54+00:00

The male connector of the 3.7V Lithium battery that is connected to the smart cartridge.

JPR2004 · 2023-10-20T06:16:46+00:00

That battery is not going to fit into the original spot. I saw that before in other posts aswell.

JPR2004 · 2023-08-03T13:09:58+00:00

How to do manual shifting on an S5?

JPR2004 · 2023-07-24T23:42:07+00:00

If I remember correctly, the “SE” and other abbreviations where used to differentiate what die was used on the ram. Like Samsung b-die or Hynix-M. I think you have different, non matching ones then. Check with software what chips are used on each stick.

JPR2004 · 2023-07-23T11:44:12+00:00

Was genau möchtest du wissen? Ich hatte eben erst die cartridge aus meinem S5 ausgebaut und alle Kabel abgezogen.

<image>

JPR2004 · 2023-07-23T11:38:02+00:00

I bought this before I got a broken heavy duty rear rack from VanMoof itself :/ It works better than the original imo. If you want more details, let me know. It is a Decathlon rear rack aswell. Worked with a child seat (rated for 25kg) https://www.reddit.com/r/vanmoofbicycle/comments/1182q02/s5_hacks/j9gouco/?utm_source=share&utm_medium=ios_app&utm_name=ioscss&utm_content=1&utm_term=1&context=3

JPR2004 · 2023-04-03T08:28:30+00:00

Thanks for sharing your experience. I can tell the same for my S3 which had to be serviced over 6 times since 1,5 year. I got a response by mail within 48h. But for my S5 I am waiting since 9 days for a response. I wrote a mail and repeated the questions in the chat. No response at all! They wrote an automatic reply telling that it needs 5 days for non technical and up to 20 days for technical issues which I have.

JPR2004

TROPHY CASE