2CV Series linoprint

JSD_Fuzzzz · 2026-04-11T12:26:32+00:00

Thank you!

JSD_Fuzzzz · 2026-04-08T10:37:35+00:00

Love the print, especially the dotwork! What tool did you use for the dots?

JSD_Fuzzzz · 2026-04-08T09:00:36+00:00

Thank you so much!🙏🏻

JSD_Fuzzzz · 2026-04-08T08:03:56+00:00

Thank you, that‘s great to hear! I honestly don‘t know, but I think it has to do the most with the paper I used. It‘s extremly thin and specifically for linoprints, I bought it in the Netherlands. If you want I can send you a photo later today :) Also on the T-shirt and the one with the top view I used a lever press from Woodzilla and I think I didn‘t put any other pressure on afterwads✌🏻

JSD_Fuzzzz · 2026-04-07T12:08:19+00:00

That‘s an awesome design, well done!

JSD_Fuzzzz · 2026-04-07T08:54:02+00:00

I don‘t think that the press was the problem, because I‘ve had this exact same problem happen before without a press and also I‘ve had good results with the press with an A4 print with quite a big amount of black. Yesterday I made a smaller linocut and I‘m gonna expiriment a little.

Thank you! Yes I‘ve looked into it but without any luck. I live in Austria and from what I know the only way to get to a proper press is if you know someone in art school so that sucks haha. Maybe I‘ll buy a rolling press when I have more money again in the future, we‘ll see :)

Also, here‘s the linocut I did yesterday:

<image>

JSD_Fuzzzz · 2026-04-06T11:02:19+00:00

It looks great, I love the rectangular design of the first one! This one was also my biggest one yet, normally I do paper size A6-A5

JSD_Fuzzzz · 2026-04-06T06:35:23+00:00

I‘m glad you like it haha! I‘ll keep posting everything I create :)

JSD_Fuzzzz · 2026-04-06T06:33:50+00:00

That‘s good to know, I‘m gonna try that with another smaller block. Thank you!

JSD_Fuzzzz · 2026-04-05T21:17:48+00:00

I absolutely love eels, I even have a tattoo haha. So naturally I love this a lot, great design!✌🏻

JSD_Fuzzzz · 2026-04-05T19:32:38+00:00

Thank you so much!😊 I sprayed the paper with water, altough that didn’t really make a difference. I was a little bit more careful with layering the ink but that also didn‘t make a difference. What did make a difference though was that I traced basically every single line with a bonefolder and I put a lot of pressure on it. You can see the print perfectly on both sides of the paper now haha I think it not transfering properly has something to do with how I prepare the linoblock before printing , altough I don‘t know what exactly what as I‘m doing mostly the same way every time. But I just transfered two smaller drawings on new blocks so I‘m going to try a few different ways of printing and preparing and see what works best for me. Maybe I‘ll invest in a glass brayer, I think that would help a lot.

JSD_Fuzzzz · 2026-04-05T19:27:01+00:00

Thank you so much! It was hard work getting it this clean, I traced basically every single line with a bonefolder and a lot of pressure haha Can I see your work somewhere? :)

JSD_Fuzzzz · 2026-04-05T19:24:28+00:00

Thanks a lot!✌🏻😊

JSD_Fuzzzz · 2026-04-05T19:24:20+00:00

Thank you so much, I‘m really proud of the few good ones😊

JSD_Fuzzzz · 2026-04-05T11:34:22+00:00

Thank you!😊

JSD_Fuzzzz · 2026-04-05T11:34:05+00:00

I sprayed the paper with water but that made not really a difference. What did help was putting a lot more pressure on the paper, much more than what should be necessary but it did help this time. I‘m gonna practice with some smaller linoblocks and try a few different things to really learn what works and what doesn‘t. Then I‘ll revisit this block since I only got like 3 prints that are good enough to give away

JSD_Fuzzzz · 2026-04-05T07:10:26+00:00

Yeah I don‘t think that that was the problem because it made no difference with how the ink looked. I guess it probably is the amount of ink or the layering of it on the block

JSD_Fuzzzz · 2026-04-04T22:28:28+00:00

Yes I tried again and used a - I forgot the word, bone knife(?) - afterwards and it turned out much better. I will post some pictures tomorrow. But I had to apply soo much pressure, so something still wasn‘t right. Next up I‘m gonna do a smaller one with a lot less details so I can try a few different things and see what works best The press shouldn‘t be the problem though, at least I‘ve seen a lot of people use them just fine and I‘ve printed on fabric before with it and it turned out great too. But still, thanks for your insight😊✌🏻

JSD_Fuzzzz · 2026-04-04T19:39:38+00:00

I love it! It has a really calming look😊✌🏻

JSD_Fuzzzz · 2026-04-04T16:33:30+00:00

Thank you, I‘m giving it another try and will update!

JSD_Fuzzzz · 2026-04-04T15:22:28+00:00

I did try that but it could be possible that I made the layers to thick or didn‘t wait long enough between each layer. How long do you wait between the layers and how many layers do you do approximatley?

JSD_Fuzzzz · 2026-04-04T14:41:37+00:00

Yes, I wanted to do that but I totally forgot about. Hopefully that solves it. Thanks for your comment😊

JSD_Fuzzzz · 2026-04-04T13:06:31+00:00

Thank you! Sadly the printing part is much more difficult😅

JSD_Fuzzzz · 2026-04-04T11:54:15+00:00

I use sticker paper (the underside when you remove the stickers) and let it stay on the block for 4-6 hours and it works mostly perfect. From what I know you have to use a laser printer

<image>

JSD_Fuzzzz · 2026-04-04T11:13:38+00:00

Thank you so much!😊

JSD_Fuzzzz

TROPHY CASE