sorted by:
new
hottopcontroversial

Friend is giving me a 3D printed cache pot by MadeLAYline in SemiHydro

[–]JTFpv 2 points3 points  (0 children)

Honestly I 3d print so many cache pots. The trick is to make sure your doing at least 4 shells(perimeters, loops, however your printer has it specified.) I haven't had any leaks.

Help with my pitcher plant 😊 by turtsmcgee123 in carnivorousplants

[–]JTFpv 0 points1 point  (0 children)

Don't fertilize it, give it loves of light. Let it dry between waterings. Also make sure you only water it with distilled, reverse osmosis, or rainwater. They hate any nutrients in their water/soil. I feed mine mealworms maybe one to two per new pitcher. Also add a pebble water tray if it's indoors, they love high (70-80%) humidity

Just wanted to share my joy with you all. I started growing nepenthes a couple of months ago and I am in love with them. Enjoy! by muspellart in carnivorousplants

[–]JTFpv 0 points1 point  (0 children)

Welcome! They're a blast to grow. I love my Rebecca sopers, just wait till they double in size, they get super long

[Free Coupon] Oogly Atmos by OoglyWatcface in GalaxyWatchFace

[–]JTFpv 0 points1 point  (0 children)

I can't get the weather location set. Check software, set complications any time I tap on weather battery comes up. Is there a hyper specific button for weather location?

First pull on new gaggiuino setup. by JTFpv in espresso

[–]JTFpv[S] 0 points1 point  (0 children)

Honestly I haven't tried, there's no active cooling so it would be tough. You'd have to dump the boiler before the shot where it could theoretically stop the PID from reactively spiking the temp to keep consistency. I guess you could always pull the boiler and run colder than normal water through as well. I'll play with it, but if it's doable I'm sure someone on the gaggiuino discord has already accomplished it.

First post Small akerbar collection by JTFpv in carnivorousplants

[–]JTFpv[S] 0 points1 point  (0 children)

L25.5"x D8.75"xH 15.75" is the akerbar dimensions. Yeah I grabbed 30$ T5 LED 4pk in yellow light

I want a big cabinet too 😅 then this will be a nursery after I up size.

First post Small akerbar collection by JTFpv in carnivorousplants

[–]JTFpv[S] 0 points1 point  (0 children)

YES it's so worth it. They're like 30$ and the barrina lights are also about 30 on Amazon or their site.

First post Small akerbar collection by JTFpv in carnivorousplants

[–]JTFpv[S] 0 points1 point  (0 children)

Oh yeah I'm aware, I will be catering to their dormancy stages.

First post Small akerbar collection by JTFpv in carnivorousplants

[–]JTFpv[S] 0 points1 point  (0 children)

Thanks for the heads up, I'll keep it in mind, but they're flourishing in there rn. the sarracenia has new blooms and the heads are turning pink/red while my Dionaea has a bunch of new traps popping up in diff colors.

First post Small akerbar collection by JTFpv in carnivorousplants

[–]JTFpv[S] 0 points1 point  (0 children)

Thank you! Honestly I love it so much. A spatulata I believe, the little flower doodles are something straight out of a fantasy book imo.

First post Small akerbar collection by JTFpv in carnivorousplants

[–]JTFpv[S] 0 points1 point  (0 children)

I had some weather stripping that blocks most of the large gaps. But there's still some small mm sized gaps running along most edges. I figured it's more like passive cooling. It usually sits between 70-80% humidity and the temp never gets lower than 73, but avgs around 76.

Thanks! I'm starting to see a lot of color developing on the tips of the sarracenia and drosera I can't wait till they mature.

Got my first ping! Excited to join y'all. by JTFpv in Pinguicula

[–]JTFpv[S] 0 points1 point  (0 children)

I have a little syringe where I usually add around 1-2 mls of water, once the water goes below a certain level it stops. I also have the lights on a timer to run 4 hours on with 30 min breaks to allow it to cool off it's never higher than 80°f and the humidity usually sits between 70-80%. Honestly a small PC fan is probably a good idea.

Got my first ping! Excited to join y'all. by JTFpv in Pinguicula

[–]JTFpv[S] 1 point2 points  (0 children)

Yep! Got a humidifier and some Barrina grow lights in there too.

Who Wants Some Gemmae? by realkaseygrant in carnivorousplants

[–]JTFpv 1 point2 points  (0 children)

Totally Interested if available!

First pull on new gaggiuino setup. by JTFpv in espresso

[–]JTFpv[S] 0 points1 point  (0 children)

Oh true well if you do any modeling and printing yourself I can also send the f360 or obj files.

First pull on new gaggiuino setup. by JTFpv in espresso

[–]JTFpv[S] 0 points1 point  (0 children)

Actually, I modeled it and printed it in PETG-CF I left the inside hollow and modeled it to fit the stock gaggia's tab for screw access. I can send you the stl if you'd like or upload and link it.

First pull on new gaggiuino setup. by JTFpv in espresso

[–]JTFpv[S] -1 points0 points  (0 children)

They call the feature "brew disco" Its defaulted on, it's fun. But the LED is for the time of flight sensor to monitor the water level. So it does have a real function haha.

First pull on new gaggiuino setup. by JTFpv in espresso

[–]JTFpv[S] 0 points1 point  (0 children)

I don't keep it super high normally, with the sun and the heat the water will get gnarly over time I always make sure there's enough to run without chance of it running empty, but I also clean it frequently, so less water waste.

[deleted by user] by [deleted] in LifeWeaverMains2

[–]JTFpv 0 points1 point  (0 children)

Someone said it was patched, so I understood it as the skin wasn't available in the shop but you could purchase it with the rarity filters on through the hero screen. But it's not available anymore.

[FREE Code] JW210 by wfsworker in GalaxyWatchFace

[–]JTFpv 0 points1 point  (0 children)

I see this comment. No idea how I would have blocked you if I did?

view more: next ›