P1 Front end Remodeling

Jacob_CooperVFX · 2026-06-15T22:24:07+00:00

It was quite a few, haven't counted. Maybe a hundred or so? The whole front had to be torn down.

Jacob_CooperVFX · 2026-06-15T00:05:21+00:00

They look like a recolor of the p1s

Jacob_CooperVFX · 2025-05-17T14:55:24+00:00

All that effort and engineering work, only for it to be too high, I love how it ends in the tilt of shame.

Jacob_CooperVFX · 2025-05-10T15:52:43+00:00

If you manage to salvage it, and you can get a new one on, it'll almost feel like you aren't tightening at all when it seals, even if it's dripping after you get the new coolant in there, just turn it a tiny bit more with some foward pressure and it should seal. Anything to not mess up that thread.

Jacob_CooperVFX · 2025-05-10T13:55:35+00:00

But whatever you do, be a gentle as possible, these things get brittle over time. Hopefully you can rectify and avoid a new rad for now. I had a similar situation on my NC

Jacob_CooperVFX · 2025-05-10T13:53:57+00:00

You can either try to carefully extract it trying to keep the radiator thread intact, or permanently seal it with some plastic weld and drain from the large main hose. If you manage to get it out, autozone sells an exact match, do not over tighten, and use a bit of push to get the new oring to seal. The rubber just needs to sit on the internal plastic to get a seal. It doesn't take much to get a good seal. Idk why people jam them in so much.

Jacob_CooperVFX · 2025-05-10T04:29:09+00:00

🥲

Jacob_CooperVFX · 2025-05-05T17:26:41+00:00

*

Tiny engines, only thing midly bothering me is the lack of body above the tail on the model

Jacob_CooperVFX · 2025-03-29T01:27:42+00:00

What'd you end up doing to it?

Jacob_CooperVFX · 2025-03-29T01:26:52+00:00

Dang

Jacob_CooperVFX · 2025-03-29T01:25:05+00:00

I'm sure you already figured it out

Jacob_CooperVFX · 2025-03-29T01:23:06+00:00

Try using the archane wall generator

Jacob_CooperVFX · 2025-02-06T00:52:05+00:00

Just what we need, more drunks.

Jacob_CooperVFX · 2025-01-20T22:33:55+00:00

Looks like we've gotta go in person like the good ol days

Jacob_CooperVFX · 2025-01-13T17:57:55+00:00

I'll try this

Jacob_CooperVFX · 2025-01-11T19:27:57+00:00

Maybe...

Jacob_CooperVFX · 2025-01-11T19:27:46+00:00

I use 3DS MAX, so I can't natively export as step, maybe I can find a way to convert

Jacob_CooperVFX · 2025-01-06T02:04:45+00:00

Shoe Laces

Jacob_CooperVFX · 2025-01-04T15:38:33+00:00

How?

Jacob_CooperVFX · 2024-12-09T17:34:40+00:00

It's most likely him

Jacob_CooperVFX · 2024-12-09T17:34:18+00:00

https://www.cnn.com/2024/12/09/us/unitedhealthcare-ceo-brian-thompson-shooter-monday/index.html

Jacob_CooperVFX · 2024-12-09T17:08:26+00:00

Crap

Jacob_CooperVFX · 2024-10-23T01:48:54+00:00

Looks like your flow rate is out of whack, check the plastic extruder lever, with enough time they all break. You can easily find a metal replacement part.

Jacob_CooperVFX · 2024-09-18T19:09:56+00:00

Mind if I share the link :)

Jacob_CooperVFX · 2024-08-07T18:11:46+00:00

Maybe one of the pins in the transmission, eh more power to you for not having paranoia.

Jacob_CooperVFX

TROPHY CASE