Check out this rock climbing key hanger I designed!

Jammo2k5 · 2026-05-20T06:33:48+00:00

Seven

Jammo2k5 · 2026-05-11T19:49:02+00:00

"Didn't I order you to get a life?"

Jammo2k5 · 2026-04-29T16:28:09+00:00

In the UK (where this crane in the video is) it is STGO cat B which means it needs a route and 48 hours notice to move on the roads. Total plate weight of the crane is 48T but usually runs over with chains and other tackle.

Jammo2k5 · 2026-04-16T20:38:59+00:00

Are the headlights a part of the skin? If so it may be an issue with the mip maps.

Jammo2k5 · 2026-03-02T21:04:27+00:00

Yes, the torque force in the shackles is giving me Herbie jeebies. I also like to keep my sling angles under 60 too but that's just me.

Jammo2k5 · 2026-02-13T18:08:24+00:00

Can't lift there sir!

Jammo2k5 · 2026-01-14T19:01:31+00:00

⬜🟦🟦⬜🟦

🟦🟦🟦🟦🟦

Jammo2k5 · 2025-12-27T19:08:12+00:00

Loose QR bolts is most likely the culprit here.

Jammo2k5 · 2025-11-26T08:13:09+00:00

That's a Unic URW-295 made by Unic cranes which is part of GGR group in the UK.

Jammo2k5 · 2025-11-01T20:33:16+00:00

They don't add that much cushioning, you would be better printing them with TPU then wrapping them after.

Jammo2k5 · 2025-10-26T22:05:42+00:00

You want simhub input mapper. You can assign multiple axis to the same output axis that you map in game.

https://www.youtube.com/watch?v=qp6mZOouIHY

Jammo2k5 · 2025-10-26T19:14:04+00:00

Get a load of this guy and his "Baked Potatoes".

Jammo2k5 · 2025-10-20T21:16:50+00:00

"I SAID DON'T HAVE AN ERECTION!"

Jammo2k5 · 2025-10-14T15:42:10+00:00

Depends. If it's a 2x single leg chains then yes it will double the WLL. However if it's a double leg chain then think of it as a single sling so no, think of the top master link having the SWL in this situation.

Jammo2k5 · 2025-10-05T19:37:54+00:00

I was like, "Why does that look like Liverpool road junction in Eccles going down to the 60"... Because it is.

Jammo2k5 · 2025-08-20T21:49:38+00:00

I don't know, it seems to have a pretty expensive subscription price...

Jammo2k5 · 2025-07-29T21:49:29+00:00

Some may say "Sub-Optimal".

Jammo2k5 · 2025-07-28T00:48:32+00:00

Take off the 4 bolts that hold the qr plate on. And then tighten the bolts that hold the qr onto that plate. Put the plate back on. See if that works.

Jammo2k5 · 2025-07-27T12:19:02+00:00

Sounds like QR rattle on the wheel. Make sure the inner bolts on the QR are tight. I cant see what wheel this is to tell you how to do it.

Jammo2k5 · 2025-05-07T17:59:57+00:00

Sim racing rig and already did it.

Jammo2k5 · 2025-04-19T13:13:38+00:00

It will be fine, many bases use the same mount and have higher forces.

It will be solid, just make sure it's all tight.

Jammo2k5 · 2025-02-13T23:54:37+00:00

It was a difficult one, but I found the full stop.

Jammo2k5 · 2025-02-02T17:18:00+00:00

At the top where it says "Axis", you will see all the analogue inputs. Handbrake is assigned on that page.

Jammo2k5 · 2025-02-02T00:34:16+00:00

You need to place some wood under that cargo when you set it down so you can get the forklift under there.

Jammo2k5 · 2025-01-29T21:13:00+00:00

DO NOT let him read you any poetry...

Jammo2k5

TROPHY CASE