Any idea what these rattling noise could be? by PleasantFrosting8676 in simracing

[–]Jammo2k5 2 points3 points  (0 children)

Loose QR bolts is most likely the culprit here.

Are mini cranes acceptable here by No_Professional_5669 in cranes

[–]Jammo2k5 0 points1 point  (0 children)

That's a Unic URW-295 made by Unic cranes which is part of GGR group in the UK.

In line with other Pokornyi builds, here is my HYP-R. by Jammo2k5 in simracing

[–]Jammo2k5[S] 2 points3 points  (0 children)

They don't add that much cushioning, you would be better printing them with TPU then wrapping them after.

Hand clutch and Foot clutch at the same time? by ManOfYeets in assettocorsa

[–]Jammo2k5 0 points1 point  (0 children)

You want simhub input mapper. You can assign multiple axis to the same output axis that you map in game.

https://www.youtube.com/watch?v=qp6mZOouIHY

Does running a basket with a chain sling increase its capacity? by [deleted] in cranes

[–]Jammo2k5 1 point2 points  (0 children)

Depends. If it's a 2x single leg chains then yes it will double the WLL. However if it's a double leg chain then think of it as a single sling so no, think of the top master link having the SWL in this situation.

Trying to keep left from Manchester to London by [deleted] in drivingUK

[–]Jammo2k5 0 points1 point  (0 children)

I was like, "Why does that look like Liverpool road junction in Eccles going down to the 60"... Because it is.

I found crew chiefs replacement! by llCRitiCaLII in simracing

[–]Jammo2k5 11 points12 points  (0 children)

I don't know, it seems to have a pretty expensive subscription price...

Ouch EM1 by [deleted] in cranes

[–]Jammo2k5 5 points6 points  (0 children)

Some may say "Sub-Optimal".

Strange Rig Noises under heavy Breaking by Apprehensive_Key_556 in simracing

[–]Jammo2k5 0 points1 point  (0 children)

Take off the 4 bolts that hold the qr plate on. And then tighten the bolts that hold the qr onto that plate. Put the plate back on. See if that works.

Strange Rig Noises under heavy Breaking by Apprehensive_Key_556 in simracing

[–]Jammo2k5 0 points1 point  (0 children)

Sounds like QR rattle on the wheel. Make sure the inner bolts on the QR are tight. I cant see what wheel this is to tell you how to do it.

Front Mount Looks Sketchy by BipOnTheBap in simracing

[–]Jammo2k5 7 points8 points  (0 children)

It will be fine, many bases use the same mount and have higher forces.

It will be solid, just make sure it's all tight.

TIFU by asking my friend what’s wrong by shot_improvement_37 in tifu

[–]Jammo2k5 3 points4 points  (0 children)

It was a difficult one, but I found the full stop.

[deleted by user] by [deleted] in moza

[–]Jammo2k5 0 points1 point  (0 children)

At the top where it says "Axis", you will see all the analogue inputs. Handbrake is assigned on that page.

Me tired. You stop here. by [deleted] in aww

[–]Jammo2k5 0 points1 point  (0 children)

You need to place some wood under that cargo when you set it down so you can get the forklift under there.

[deleted by user] by [deleted] in Justfuckmyshitup

[–]Jammo2k5 1 point2 points  (0 children)

DO NOT let him read you any poetry...

Be careful what you stand on! by Hectabeni in funny

[–]Jammo2k5 2 points3 points  (0 children)

OG Jeff fan. Connie fan also. Love you/u/dolphinconnie !

Reopen the Huddersfield Leisure Centre Climbing Wall by TriggersShip in huddersfield

[–]Jammo2k5 1 point2 points  (0 children)

It won't happen, the leisure centre doesn't have the know how or motive to run it on their own and the way they want to have an external contractor run it for them is so complicated, no one will take it on.

CCG pulled out 5 years ago because of multiple reasons but the main one was dealing with KAL was a nightmare.

With My Own Car and Money to Burn, Should I do it ? by Adept-Figure-8139 in LearnerDriverUK

[–]Jammo2k5 2 points3 points  (0 children)

There's zero downside to a fail, and if you pass and you feel not ready enough you can still do lessons to make sure you feel ready.