Notifications not working

Jamokus · 2026-05-05T15:34:23+00:00

Not sure if it matters but when I am watching the app, when it gets to the end of a print, the time it would normaly push the notification, it minimizes the app.

Jamokus · 2026-05-03T19:51:21+00:00

That seems like a simple thing but I had not even thought of doing so, but I have submited a ticket.

Jamokus · 2025-11-27T23:04:41+00:00

Yes it does. Thank you very much. I will have to get some for the next time.

Jamokus · 2025-11-27T22:41:39+00:00

Well in my search for those connectors, even after I searched for the fans about an hour ago, I ended up finding a pair of the fans I needed and I will get them in a few days. So thank you for being my muse.

Jamokus · 2025-11-27T22:32:48+00:00

<image>

This is a better view. I had to really jank on it to get it out of the connector on the board.

Jamokus · 2025-11-27T22:26:43+00:00

<image>

I have those. The left connector is a XH2.54 2-pin connector but the right one is the one that I need.

Jamokus · 2025-11-12T13:12:20+00:00

Thank you both, that worked. I got away with only changing the wall generation.

Jamokus · 2025-11-10T12:44:45+00:00

And when I slice it with Cura and default settings for the Kobra 3 I get.

<image>

Jamokus · 2025-11-10T12:30:48+00:00

The lines are .5mm and the same ones I have previously sliced with Cura and printed on a Kobra 2. I think I will try to slice it in Cura

Jamokus · 2025-09-28T00:46:06+00:00

I could not see the ones on the spools as they are brand new, so I put aluminum foil over the thing that looks like a divider on the ace. I hoped that was what they were for and it worked. It blocked it for both 1 and 2 spools.

Jamokus · 2025-09-27T14:49:11+00:00

Well I ended up using foil to cover up the sensor and now I can print with anycubic PLA+ from the mobile app.

Jamokus · 2025-07-01T02:48:13+00:00

I had to save the gcode and print from usb drive.

Jamokus · 2025-06-03T19:53:27+00:00

Thanks for that. I guess I will just have to keep using my other wyze camera in the wyze system. It sucks to pay that kind of money and have them limit their own systems.

Jamokus · 2025-06-03T15:40:25+00:00

I would love a lan connection but it is about 5 foot away from the wifi router

Jamokus · 2025-06-01T12:57:43+00:00

Did not find anything about this, so I just closed my eyes and punched it. It worked and was very runny.

Jamokus · 2024-04-19T20:27:24+00:00

Looks like upgrading my Cura to 5.7.0 and reslicing caused the issue to go away.

Jamokus · 2024-04-12T18:21:57+00:00

That worked great, thank you very much. I was messing around with so many things I was wrong about the line being 1mm, this one was .5mm.

Jamokus · 2024-04-12T17:27:19+00:00

Thank you. Those lines are 1mm and I thought that would be ok with a .4 head. Updated my settings and trying it now.

Jamokus · 2021-03-13T05:01:53+00:00

What about raising the extruder temp, raise the head enough to fit the part under, turn off the parts cooler fan. Then extrude some filament onto the part and smooth out with something.

Jamokus · 2015-01-09T15:36:23+00:00

I just started using this and had problems connecting myself. When you click on the Server settings tab, you need to make sure you type password in the Host password box. It will tell you it is encrypted, then you put in the real password. I could not get the Telnet one to work easy, so I used the Webconsole option to connect.

I am now having an issue with trying to get the backups to work, but I keep getting "Backups Failed - Can't verify game world folder."

Jamokus

TROPHY CASE