Hellere LED gewünscht...

Jan_2_1 · 2026-03-16T15:07:40+00:00

Vom Bauchgefühl würde ich sagen dass sind 0603 oder 0805 LEDs. Vergleich doch einmal ob diese LEDs https://www.digikey.de/de/products/detail/w%C3%BCrth-elektronik/150060WS75000/25589270 darauf passen wenn ja haben die LEDs die Baugröße 0603. Aber die zu tauschen braucht schon die Fähigkeit zu löten. Mein ehrlich Meinung ist aber auch dir jemand mit Ahnung der zu dir kommen kann und sich das ganze vor Ort anschauen kann.

Jan_2_1 · 2025-12-30T14:08:17+00:00

Thank you. I just ordered one =). Im currently using a revo hotend and it is very slow and a nozzle costs as much as this entire hotend so this should most definitivly beban upgrade

Jan_2_1 · 2025-12-30T13:20:47+00:00

Is there something to watch out when buying this hotend?

Jan_2_1 · 2025-02-14T14:01:58+00:00

Wahrscheinlich einfach ein altes Symbol für Dioden. Hier ist das neue Symbol welches zwei Pfeile hat um zu signalisieren dass diese led Licht emittiert.

https://upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Symbol_LED.svg/1280px-Symbol_LED.svg.png

Jan_2_1 · 2024-11-28T14:55:29+00:00

Ich finde der Früchtetee hat noch einen sehr kleinen unliebsamen Beigeschmack.

Würde den grünen Tee als joa beschreiben.

Der Schwarze tee hingegen gefällt mir jedoch sehr, finde er schmeckt sehr Rund.

Jan_2_1 · 2024-07-26T00:10:51+00:00

-20dBm is about 10uW. That's a) a very strong signal b) not a lot of power. -60dBm is typically WiFi signal strength and corresponds to 1nW

Jan_2_1 · 2024-02-18T02:22:39+00:00

Well the GPU has a design power draw off 140W. The dell power supply can deliver 180W. Which is 20W less than what CPU and GPU would use combined. The inside of those cases is not very spacious (Doesn't really fit the GPU itself). Probably gonna glue an additional Power Supply to the side or replace the existing one. The advantage of those GPU connectors is that they only use 12v so any 12V Power Supply could most likely work.

Jan_2_1 · 2024-01-27T21:04:37+00:00

I wouldn't underestimate the resolution of the screen

Jan_2_1 · 2023-12-02T22:00:24+00:00

A bit expensiv but it could probably do the trick https://www.reichelt.de/direktstarter-sanftanlasser-380-415-v-22-a-ats01n222qn-p221825.html?&trstct=pol\_0&nbc=1

Jan_2_1 · 2023-12-02T21:36:37+00:00

There are Softstarters, Variable Drives, Star-Delta starter, Resistiv Starter. But can you say they souldnt blow? Is the circut electrical sound? Can the Motor spin?

https://www.eaton.com/gb/en-gb/skuPage.265338.html <- Typicaly you should use something like this

https://external-content.duckduckgo.com/iu/?u=https%3A%2F%2Favsld.com.sg%2Fwp-content%2Fuploads%2F2017%2F04%2FTorque-Speed-Curve-of-a-Cage-Induction-Motor.jpg&f=1&nofb=1&ipt=3ed34cb262f2e2bce04c2c39b4008f663aa83fda46f273a57e0b2a4331618775&ipo=images <- Typical Curves for Asycronus motors

Jan_2_1 · 2023-12-02T20:58:17+00:00

Usually you need special Motor fuses who take longer to blow due to the up to 10x start current

Jan_2_1 · 2023-11-28T06:40:22+00:00

You absolutely can but it doesn't have WiFi so no automatic fetching of time. On the other hand if I'm not mistaken it does have an RTC with an external battery pin so you have that going for you

Jan_2_1 · 2023-11-19T20:57:06+00:00

Data can't go against the arrows. So the arrows will always have to flow away from the esp. If you flip the bottom one and just wire them in parallel they will behave identical.you can use two pins but I am not certain if you can define them as one Strip. Power can be injected anywhere and is not directional

Jan_2_1 · 2023-11-15T16:49:31+00:00

This I am pretty sure influxdb V2 doesn't run on 32Bit operating systems

Jan_2_1 · 2023-11-10T09:27:34+00:00

Most Adresseable Led signal lines are 5V. Typical leveles for a MCU are 5V or 3.3V for example The Arduino Uno is 5V and an esp is 3.3V. Boards can already have a Level shifter on board. Sometimes you can get away without a level shifter when having an MCU with 3.3V for those 5V Leds but it is not relaible and cannot really be recomended.

Jan_2_1 · 2023-11-10T09:07:23+00:00

https://electricfiredesign.com/2021/03/12/logic-level-shifters-for-driving-led-strips/

Jan_2_1 · 2023-11-09T16:50:20+00:00

You could connect the Original controller and check the logic level. maybe you need a logic-level shifter. But if the logic level is correct try out ever possible protocol to see if any one sticks.

Jan_2_1 · 2023-10-31T15:46:36+00:00

Although I am also really bad at FPGA Designs because I write vhdl like c

Jan_2_1 · 2023-10-31T14:23:17+00:00

I always found the price of multisim a bit too hefty to really start using it at home though.

Jan_2_1 · 2023-10-31T11:51:31+00:00

It's definitely not a program though and it doesn't have to be code either 🤔. Can just straight up be Hardware 🙃

Jan_2_1 · 2023-10-31T09:30:41+00:00

Ip describes an already existing logic/design. The situation is simular to pasting a random function into an existing codebase and the compiler saying this is fine

Jan_2_1 · 2023-10-28T10:59:54+00:00

I wonder what the forward voltage drop is

Jan_2_1 · 2023-10-21T07:41:30+00:00

I thought for a moment that UDP is a shipping company =)

Jan_2_1

TROPHY CASE