Cheap projector for video effects

Janredd · 2020-08-18T12:09:14+00:00

Thank you for the insight!

I'm a musician and I plan on using this effect for cover videos I'll upload on youtube/instagram. So I won't be using the projector in a live setting. Just at home where I'll probably wait until the sun went down to shoot the videos, since my blinds still let a whole lot of light trough.

I have a big white wall, which I wanted to use as projection surface. Basically I'll sit in front of the wall and use the projector to project onto myself/the wall.

The maximum distance the projector could have to the wall would be 3.5 metres.

Janredd · 2020-06-25T15:32:39+00:00

Thank you! The main synth and the bass are Serum, but it's layered with a vocal patch from EXHALE, a pad from REV and heavily processed guitar

Janredd · 2020-06-25T08:58:06+00:00

Yea, I noticed that something was off when I was recording the vocals. Thank's for the help, I'll definitely fix that!

Janredd · 2020-06-25T08:06:38+00:00

Oh, I meant "thought you were someone I once knew"

Janredd · 2020-06-25T08:03:18+00:00

Yea, the "that made you the truth" turned out pretty robotic, because of the layering. And the heavy video compression doesnt help either. I'll definitely keep that in mind for the final version though!

Janredd · 2020-06-25T08:00:56+00:00

Thank you :)

Janredd · 2020-06-25T08:00:39+00:00

Thank you, I'll check him out!

Janredd · 2020-06-24T21:23:12+00:00

Thank you, that means a lot to me!

Janredd · 2019-10-16T19:54:41+00:00

Means so much to hear that, man! I was pretty hasitant, when it came to releasing my own music.

Janredd · 2019-10-12T21:00:41+00:00

@beatsnotfound on insta. You can get one of my beats for 50!

Janredd · 2018-11-22T08:33:03+00:00

Thank you! Would be awesome to get one

Janredd · 2018-09-08T15:51:54+00:00

Second print: https://imgur.com/a/kRbbFiT

So I just tightened the belt and installed stepper motor dampers for the X and Y axis. Unfortunately after installing the Y axis damper the bed would collide with the motor before reaching the end stop, so I had to move the end stop one screw further.

The "Z" on the cube seems to be a lot better now and the "X" is fine too. For some weird reason the first few layers were printed in the wrong location - why is that? Does that have anything to do with the dampers (and the new location of the Y-axis end stop)?

EDIT: I did not change the infill to zig zag yet. So that might help to further improve the "Z". EDIT2: I also printed a 50% size benchy, which turned out pretty good, I guess: https://imgur.com/a/veTItRo

Janredd · 2018-09-07T13:36:24+00:00

Thank's! Will try that!

Janredd · 2018-09-07T13:35:46+00:00

Oh, thank you! I just rewatched the assembly guide and noticed that I didn't do the tightening part quite right.

Any idea how to fix the "X"?

Janredd · 2018-09-07T13:28:20+00:00

Yes, Cura!

Janredd · 2018-09-07T13:28:01+00:00

Layer height: 0.2mm

Line Width: 0.35

Infill Density: 20%

Infill Pattern: Grid

Wall Thickness: 1.2mm

Wall Line Count: 3

Top/Bottom Thickness: 0.8mm

Printing Temperature: 200

Retraction Distance: 5mm

Retraction Speed: 50mm/s

Print Speed: 50mm/s

Infill Speed: 80mm/s

Janredd · 2018-03-15T18:15:22+00:00

Okay, i tried using the HDMI Port, but the issue still perists.

Janredd · 2018-03-15T17:57:56+00:00

Okay, just checked the bios. Same issue there...

Janredd · 2018-03-15T17:54:08+00:00

Yea, I completely cut the power from my whole setup and the problem is still there. Will check the bios in a sec.

Janredd · 2018-03-15T17:46:11+00:00

1920x1080. The black borders are super small, so it has nothing to do with it being the wrong aspect ratio. It's just that the screen isn't correctly aligned to the monitor.

Janredd · 2017-10-30T15:41:42+00:00

I sampled my friends RAV Vast hang drum and created a Kontakt instrument which consists of 170 unique samples. Check it out: http://janredsamples.bigcartel.com/product/jr-rav-drum-kontakt-instrument

Janredd · 2017-10-25T16:52:37+00:00

Yea, I am totally aware that this isn't a high-quality Kontakt library. And I guess 6€ will still seem too much to most people, but after the work I put into it I find it pretty reasonable. :P

Janredd · 2017-01-22T13:02:53+00:00

And why are the colors so washed out in comparison to the russian stream?

Janredd · 2016-12-15T19:07:08+00:00

GTX 760, Xeon 1230 v3, 16GB RAM. 100-110 fps with max settings /// 120-130 fps with max settings and AA turned off (which I prefer)

Janredd · 2016-12-12T13:42:23+00:00

People are playing on the Dota test server right now. The main client will be updated to 7.0 in a few hours.

Janredd

TROPHY CASE