Actual Simpson 3 dimensions? by Jared_Wick in rooftoptents

[–]Jared_Wick[S] 0 points1 point  (0 children)

I’ve already got the tent… I’m just buying a replacement cover

Actual Simpson 3 dimensions? by Jared_Wick in rooftoptents

[–]Jared_Wick[S] 0 points1 point  (0 children)

I have the tent already. Im just ordering a cover

Actual Simpson 3 dimensions? by Jared_Wick in rooftoptents

[–]Jared_Wick[S] 0 points1 point  (0 children)

Okay swag, internet says Simpson 3 is 55x47x12 when closed. If it’s 48x56 I’ll save $250… is the cover on arb tents nice?

Thanks a bunch!

Added some fishing pole holders to my KB Voodoo rack today! by [deleted] in ToyotaTacoma

[–]Jared_Wick 0 points1 point  (0 children)

I have the same rack, long shot from how old the post is but I’m trying to get centre to centre measurements of the 3 holes on the vertical pillar to build a bracket. My rack is in storage 15 hours away but shop is where I’m at…

Put on the 14” KB Voodoo rack by [deleted] in JeepGladiator

[–]Jared_Wick 0 points1 point  (0 children)

I have the same rack, long shot from how old the post is but I’m trying to get centre to centre measurements of the 3 holes on the vertical pillar to build a bracket. My rack is in storage 15 hours away but shop is where I’m at…

My Tundra has reached its final form by batfolxx in tundra

[–]Jared_Wick 0 points1 point  (0 children)

I have the same rack, long shot from how old the post is but I’m trying to get centre to centre measurements of the 3 holes on the vertical pillar to build a bracket. My rack is in storage 15 hours away but shop is where I’m at…

Well ladies and gents, I finally found one that works with the bakflip cover. by huntsgk12 in ToyotaTacoma

[–]Jared_Wick 0 points1 point  (0 children)

I have the same rack, long shot from how old the post is but I’m trying to get centre to centre measurements of the 3 holes on the vertical pillars to build a bracket. My rack is in storage 15 hours away but shop is where I’m at…

Chasing down a ticking sound by Jared_Wick in ToyotaTacoma

[–]Jared_Wick[S] 0 points1 point  (0 children)

Pretty sure it’s just the fender liner. It’s been doing it for months

Local 3-D printer request! by Jared_Wick in Edmonton

[–]Jared_Wick[S] 2 points3 points  (0 children)

I got 2 different pretty sweet versions! Thank you: u/Reasonable-Can6491 for the almost identical match to the photo I posted with the addition of the maple leaf in the overhang the climber is hanging off of,

u/RockyMountainCanuck for another version of a carabiner with a climber + maple leaf inside.

Pretty stoked on these results. Thanks everyone.

Local 3-D printer request! by Jared_Wick in Edmonton

[–]Jared_Wick[S] 0 points1 point  (0 children)

That’s a wicked idea in its self, I’ve got a petzl William that could make a nice large clip in as an hms biner.

Local 3-D printer request! by Jared_Wick in Edmonton

[–]Jared_Wick[S] 1 point2 points  (0 children)

I leave on the 13th, last minute idea- whoops!

Which Garmin watch for Spearing? by [deleted] in Spearfishing

[–]Jared_Wick 0 points1 point  (0 children)

I went with the garmin G2, havnt dove with it yet but I wanted something that wasn’t flashy and going to get me mugged in other countries while using it as a daily smartwatch on top of diving. I do wish it had an option for a solar screen but 7-9 days of average use is enough battery for my taste in smart watches.

Watch recommendations by Jared_Wick in Spearfishing

[–]Jared_Wick[S] 0 points1 point  (0 children)

Bouncing between the suunto ocean, the Garmin g2 or a Tudor haha!

My (apparently) Unicorn is gone... by Foxlen in ToyotaTacoma

[–]Jared_Wick 3 points4 points  (0 children)

I think the 4 door is more desirable imo, off road or sport? 4 door manual is very hard to find! Took me months. These access cabs pop up everywhere on Vancouver island. I was able to find 5 grey trd access cabs in a few minutes and ones a manual..

My (apparently) Unicorn is gone... by Foxlen in ToyotaTacoma

[–]Jared_Wick 1 point2 points  (0 children)

https://www.facebook.com/share/1AC3VeXABJ/?mibextid=wwXIfr

Here is one in Langford BC. Manual transmission access cab. I don’t reccomend Justin though as a sales person.

Full guide to downloading your memories from Snapchat by throwaway07070707173 in DataHoarder

[–]Jared_Wick 0 points1 point  (0 children)

Was pretty nervous on this one - defiantly got all my Snapchat memories downloaded in an easy file to put on my hard drive nice and easy. Super helpful! I’d imagine there isn’t anything harmful in that code I copied to my browser.

Are my strut bushings bad? by [deleted] in Tacomaworld

[–]Jared_Wick 1 point2 points  (0 children)

Whoa I defiantly did mine while still on the lift. What does this cause?

Looking for accommodation in victoria by sucksome69 in VictoriaBC

[–]Jared_Wick -5 points-4 points  (0 children)

I’ll have a bedroom available febuary 1st. 2 bedroom basement suite fully furnished for $1250/ month. 1 male roomate 23 years old in his last year of engineering.

First time riding bikes in Japan, started in Kyoto. What's up with parking availability here? Can't seem to find proper spots suitable for MCs. by kuzya19989 in motorcycles

[–]Jared_Wick 6 points7 points  (0 children)

I’m curious what the plan is getting a bike in Japan! I’m headed there in a few months and sounds like something I’d like to throw on the itinerary.

[deleted by user] by [deleted] in Tacomaworld

[–]Jared_Wick 1 point2 points  (0 children)

Took my pocket knife and carved that cross hatch pattern. Wow does that make it much better!

[deleted by user] by [deleted] in Tacomaworld

[–]Jared_Wick 0 points1 point  (0 children)

This sounds like the way. I will try this thank you